Hardness Tester Dealers in Fort, Mumbai

  PRINCIPLE : ROCKWELL ROCKWELL CUM BRINELL SUPERFICIAL SUPERFICIAL CUM ROCKWELL SUPERFICIAL CUM ROCKWELL CUM BRINELL Precision fully enclosed seasoned cast iron body hardness tester ideally suitable for use on measuring hardness of metals and altoys of all types soft or hard in any shape whether flat, round, or irregular shapes equipped with special clampingl cone for holding job to avoid slipage to protect indentors. Dial gauge is covered with transparent glass cover to protect from dust and damages loading is by square threaded screw and unloading is by eccentric lever while penetration is hydraulically operated. Maximum depth of threat 150 mm.   The different models are available as described below. AG150 :*Manual load selection.*Manual zero setting type dial guage. *60, 100 & 150 kgf. load range to check Rockwell A, B & C Scale. *Supplied with 1 to 11 Accessories. AZ-150 :*Similar to AC-150, But auto zero setting type dial guage. *Supplied with 1 to 11 Acessories. ALZ-150:*Automatic load selector provided at right side of the machine. *Automatic zero setting type dial guage. *60,100 & 150 kgf major load. *To check Rodcwell A, B & C scale. *Supplied with 1 to 11 Accessories. ALZ-B-187.5 :*Similar to ALZ-150 with additional load 187.5 kgf. *To check Rockwell A, B & C scale and Brinell scale with ball Dia. 2.5 mm & 187.5 kgf. load. *Supplied with 1 to 11, 13, 14, & 19 Accessories. ALZ-B-250 :*Similar to ALZ-B-187.5 With additional load 250 kgf. *To check Rockwell A, B & C scale and Brinel scale with ball Dia. 5 mm and 250 kgf load. *Supplied with 1 to 11, 13 to 16 & 19 Accessories. SF-15-45 :*Manual Load selection. *Automatic zero setting type superficial dial guage. *15, 30 & 45 kgf load range available from Aluminium. *To check Superficial N & T scale. *Supplied with 1 to 8, 10, 11, 12, 17, & 18 Accessories. AZ+SF-15-150 :*A unique combination of AZ-150 & SF-15-45 models. Manual Load selection. *Automatic zero setting type Superficial dial guage. *15, 30, 45, 60, 100 & 150 bad range. *To check Rockwell A, B & C Scales & Superficial N & T scales. *Supplied with 1 to 12, 17 & 18 Accessories. Also available :AZ- (62.5, 100, 125, 150) AZ + SF (15 - 250) Any other testers can be manufactured as per the customers design.We reserve the right to change in above specification due to constant improvement & devement.

HT-7 is a hardness tester which uses an impact body with a tungsten carbide tip, which is impelled by a spring onto the metal surface. The ratio of rebound velocity to the impact velocity is proportional to the hardness of the sample. The instrument converts this into a hardness value in various scales

• MODEL  : TEST HEIGHT
• DEPTH OF THROAT: SIZE
• MM: MM
• MM X MM X MM: L W H
• STANDARD: 250+/-5
• 150+/-5: 455 x 170 x 670
• MEDIUM: 350+/-5
• 150+/-5: 455 x 170 x 830
• JUMBO: 550+/-5
• 150+/-5: 515 x 205 x 1020

• Type: Automatic
• Voltage: 220V
• Frequency: 60Hz
• Power: 1-3kv
• Warranty: 1 Year
• Application: Industrial

Shore C Hardness Tester is designed for various foam and sponge. APPLICATION:   Shore C is Designed for Various Foam and Sponge.

• Type: Test Terminal Blocks,Test Terminal Blocks
• Material: Ceramic,Steel
• Application: Electronic Connectors
• Color: Brown, Dark Brown
• Power Source: Electric
• Feature: Easy To Connect, Four Times Stronger
• Phase: Single Phase
• Certifications: CE Certified
• Color: Black
• Brand Name: SLBI
• Uniformity: ≤9HLD
• Model Number: NWKB/FC-01

• Country of Origin: India
• Type: Shore Hardness Tester
• Color: White
• Corrosion Resistance: Yes
• Display Type: Analog

• Height: 860 mm (Approx.)
• Load range:: 500, 750, 1000, 1500, 2000, 2500 & 3000 kgf.
• Maximum test height: 254 mm
• Depth of throat:: 150 mm
• Gross weight: 220 kg. (Approx.)
• Size of base: 495 * 255 mm (Approx.)

Brinell Hardness Tester is a production type machine designed for measuring the Brinell Hardness of steels and other metals that are flat, round or irregular in shape. The machine is sensitive, accurate and easy to operate. The machine consists of a ‘J’ frame, main lever, hanger, elevating screw, loading - unloading mechanism and damper system. The load is applied on the job through a ball indentor. It is applied through a lever mechanism.  - The main lever carries three male vees one for hanger second for spindle shaft and third for pivot vee. The elevating screw can be moved up and down by rotating hand wheel. There are six detachable weight out of which four are each equivalent to 500 kgf and two are each equivalent to 250 kgf to be made use of for application of desired load in addition to the bottom weight equivalent to 500 kgf. The operating lever is provided for loading & unloading.  - The damper system consists of main cylinder, piston, valve disc, connecting rod and metering valve. The damping sensitivity is adjusted by the metering valve. The connecting rod and piston is actuated through cam, mounted on cam shaft while operating.

• Display Type: Digital
• Warranty: 1 yr
• Country of Origin: Made in India
• Item Code: PPUESS-1407
• Brand: U-Safe
• Automation Grade: Automatic
• Weight: 2 kg
• I Deal In: New Only

• Diameter: 1ST RANGE 0-15MM, 2ND RANGE 0-35MM
• Size: Customized
• Application: Industrial,Laboratory

Thess metal hardness testers have a large and clear display which are integrated in the robust ABS plastic housing . With background lightning, the LCD display of the metal hardness testers offers a clear overview of the recorded metal hardness values even in dimly lit work areas. The wireless printers (included as an standard accessory) offer any time printing facility of the values recorded. These metal hardness testers can measure hardness in any known metal hardness scale as also can covert readings of any scale to any scale.

• Accuracy: +- (0.5 % + 2 digits), within 23+- 5 .
• Brand Name: LUTRON
• Humidity: Less than 80% RH
• Model Name/Number: FR5120
• Dimension: 215 x 90 x 45 mm ( 8.5 x 3.5 x 1.8 inch )
• Weight: 650 g ( 1.43 LB )/with batteries.
• Test Range: Max. capacity : 20 Kgf x 0.01 Kgf ( 10 gf )
• Temperature: 0 to 50 ( 32 to 122 ).

• Type: Rubber Hardness Tester
• Color: Green, Grey, Light Green, Multicolor, Sky Blue, White
• Voltage: 110V, 220V
• Frequency: 50Hz, 60Hz
• Power: 1-3kv, 3-5kv
• Warranty: 1year
• Condition: New, Used
• Application: Labouratory Use
• Feature: Durable, Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish
• cetification: ISI Certified
• Temperature: High Temperature, Low Temperature, Medium Temperature

• diameter: 10 mm

The hammer type Poldi Hardness Tester is suitable for measuring the Brinell Hardness of Steel, Cast iron, Brass Aluminum, Copper etc. This Poldi Hardness Tester is useful to test parts where bench type model is not useful. This type of machine is most ideal and simple for foundries.

• Features: Reliable performance , Easy operation , Less maintenance

• Display Type: LCD
• Condition: New
• Automation Grade: Automatic
• Power (Kw): 4kW
• Support Language: English

• Feature: Operating Rockwell hardness testing of hard alloy, carbon steel, alloy steel and non-ferrous metal, High digital display resolution, Easy operation with auto loading and unloading of test force

• Color: White and Black
• Display: Digital
• Portable: Yes
• Capacity: 0 to 20 kgs

Hardness Testers, current testers, flexible fiberscopes

Polishing Machines, thread rolling machines

digital shore durometer, constant load shore a durometers

Pencil Hardness Testers, Electronic Coating Thickness Gauge

Hardness Testers, Milling Cutters, coating testers, Diamond Dresser

MGW Portable Metal Hardness Tester MHT-1, MGW Digimatic Indicator

Leeb Hardness Tester, External Pistol Caliper, Floating Carriage Micrometer

Ball Screw, Precision Measuring Tools

hardness tester, Measuring Instrument, tension gauge, caliper gauge