HDPE Pipe Dealers in Andheri, Mumbai

Product Range Dia 6mm – 1600 mmOutput : 40 Kgs/Hr.- 1500 Kgs/Hr. These production lines are developed by German Technology. It is applicable for high speed extrusion for various polyolefin materials e.g. PE,PP,PB,PERT,ABS etc.Diameters of screw ranges from 20mm to 200mm.  It is mainly applied in the extrusion of polyolefin plastics. Slotted feeder cylinder and novel screw design may remarkably enhance its plasticization.  It has advantages such as high extrusive volume, low melt temperature, wide applicable material range etc. High torque reducing speed installationHigh torque outputHigh hardness and fineness tooth flank gear structureLow noise box design  Oil pump cyclic lubricationOuter-connected cooler forced coolingSpecial feeder inlet designHas perfect water cooling deviceProfessional bushing with ladder grooveCharger with infeed device   Control systemFairly high precision temperature-control deviceSpeed regulative system with stable operationControl components with reliable performancePlasticization controllable which optimizes its plasticization performanceLow melt temperature makes the melt body even.Machine barrel and screw made with introduction of German technology Non-maintenance operation, super-quiet blower cooling cylinderResistance porcelain heater coil, Germany origin design for out lookingControl system is also available with  Microcomputer.

• Small sizes: 20 mm to 110 mm

HDPE Pipes are extremely useful in Water Supply, Bore Well, Sprinkler, Lift Irrigation, Drip Irrigation, Pesticide Dispersal, Cable Ducting, SewerageDrainage, Natural & other gases etc, in urban and rural areas.They are also useful- for conveyance & flow applications in ChemicalProcessing Industries, Telecommunications, Vegetable Oils, Fruit Juices, Dairies and other liquids & semi-liquids including Acids, Alkalis & other corrosive chemicals. Our current range of HDPE pipes are available in sizes 20 to 630mm OD pressure rating from PN-2.5 to PN-16.5 conforming to IS 4984:1995 & IS 14333:1996 as per required application. We also supply the requisite HDPE fittings.

HDPE Pipe is a primary alternative to PVC (Poly Vinyl Chloride) pipe for all piping applications and is rapidly gaining market share for potable water, sewer, conduit and ducting, DWV (Drain, Waste and Vent) agriculture, and ground drainage uses. Used Since the 1950's, HDPE has demonstrated its effectiveness through its durability, leak-free performance, corrosion resistance and ductility. HDPE pipes are durable, leak-free, corrosion resistant, and ductile. Its greater resilience and flexibility makes it less susceptible than PVC to surges, damage from digging, and shifting soils during earthquakes. HDPE is also preferable to PVC as it is chlorine-less, requires fewer additives in its manufacture and has a much higher recycling rate than PVC. Tulsi HDPE OD Pipes are available from 20mm to 315mm in PE 63, PE80, PE 100range in PN 2.5,4,6,8,10,12.5 and 16 kgcm2 pressure and Tulsi HDPE ID pipes are available in 2” to 3” with Silicon coated & without coated or as per customer demand.

Corrugated Standard is a more flexible form of HDPE conduit used to protect fiber cables in underground conduit systems. Corrugated Standard can be pulled into main conduit systems for short distances. Corrugated Standard is available in numerous colors and is available in reels or in coils. This product has a reduced bend radius when compared to Smoothwall HDPE. Bull-Line pull tape can be pre-installed in Corrugated Standard. This eliminates the need to install a measuring or pull tape after installation

• Brand Name: Mehar
• Material: HDPE DWC
• Color: Orange
• Application: Underground Cables
• Length: 6 Mtrs
• Type: Pipes
• Double Walled & Single Walled Corrugated: Black-Yellow , Orange
• 40 mm to 315 mm: -

We are offering hdpe dwc swc pipes. Corrugated ducting for under-ground cable protection management and sewer drainage known as double wall corrugated (dwc) hdpe corrugated pipes, post-tensioning of structures known as single wall corrugated (swc) pipes, microducts & polymide flexible conduits for electrical applications. These pipes are manufactured on imported production lines and according to various national and international standards. We are associated with prestigious clients like indian railways airport authorities pwds municipal corp. bsnl & other telecom companies for a long time. sizes produced: 40mm od to 315mm od

Features Flexible, strong & resilient to impact. Since they are light in weight, they are easy to handle, transport and install even on difficult terrain Easy and economic to install since trenches are not required. Available in length as required-straight as well as coil lengths and does not require joints and couplers Better flow characteristics because of smooth inner surface Hygienic and odourless since there is no contamination as the pipes are resistant to scale formation, chemical formation and biological formation.

High resistance to fire, chemicals and corrosion, leads to increased safety,Esay to fit installation process saves time, minimizes labour and regular maintenance costs.

hdpe single wall corrugated pipe, Precision Parts, Manhole Covers

We are engaged in supplying of HDPE Pipes

Used in a variety of industrial applications, our range of High Density Polyethylene (HDPE) Pipes is considered as the best option available in the market. Furthermore, our range is light in weight, which makes it easy to install & handle. Our pipes are durable, corrosion resistant and possess high impact strength due to the high grade raw material used to design these.

plastic pp hdpe pipe, f r p resins

HDPE Pipe, Pvc Pipe, PPR Pipe Fitting, Ppr Pipe, lldpe pipe fitting

HDPE Pipe

Hdpe Pipes, fibreglass, Pigments, lamination materials, gel coat, Resins

Hdpe Pipes, rigid pvc conduit, rigid pvc accessories

Hdpe Pipes, Textile Machinery, textile plants

Hdpe Plastic Pipes, Ribbed plastic pipe, Corrugated plastic pipes