Heat Exchanger Gaskets Dealers in Mumbai

• Material: SS
• Shape: Round
• Color: Silver
• Pattern: Plain
• Finishing: Coated
• Packaging Type: Packet
• Outer Diameter: 0-15mm, 15-30mm
• Usage: Industrial
• Specialities: Durable Finish Standards, Abrasion Resistance

• Material: EPDM-HT, NBR-HT, Viton
• Color: Black
• Brand Name: Kelvion, Varalka, Funke, Sondex
• Usage/Application: Industrial
• Maximum Working Pressure: 35 bar
• Temperature: -20 deg C to + 180 deg C
•  :  

We are manufacturer, supplier & exporter of wide range of Heat Exchangers Gaskets. These are suitable for application where improved performance at low seating stresses is required. These gasket or its types differ due to the functioning conditions of the exchanger. Metallic gaskets comes in various types such as Double and Single Jacket, Solid Metal or Spiral Wound. These gaskets are used in areas where extreme temperatures and excessive movement due to thermal expansion exist.

Accurate Rubber Industries is leading high quality Industrial Rubber Gaskets, Plate Type Heat Exchanger Rubber Gaskets Manufacturers & Suppliers in Mumbai (India). A Plate Heat Exchanger consists of a number of pressed & punched gasketed channel plates. These are clamped together in a frame by tightening bolts. Alternate plates are inverted and the gaps between the plates form liquid flow channels, each liquid flowing in alternate channels. The liquid is sealed against the atmosphere by RUBBER GASKETS. Therefore not only the plates but also the gaskets have very important role to play for the effective operation of the equipment. The right selection of material (MOC) for required working Parameters and its correct designed configu- -ration plays a vital role for smooth and successful running of PHE. While selecting the suitable material (MOC) for rubber gasket for required parameters, we normally choose it out of polymers like : BR (Nitro Butadine Rubber) Neoprene (Chloroprene) EPDM (Ethylene Propelene Dien Monomer ) Butyle - Resin cured Butyle Rubber, Chloro Butyle, Bromo Butyle Viton - (Floro Elastomer) Silicone Hypalon Physical properties: We make Rubber Gaskets for temperature resistant from -72 dg.C to high temp. Resistant for 110 dg. C, 125 dg. C, 148 dg. C, 200 dg.C, 250 dg. C, 315 dg. C, Minimum Compression se and permanent set, Resistant to Gas, Sea Water, Oil (Edible and Non-Edible) steam etc. resistant to impact shocks, vibration, Radiation, Corona - Ozone, Infrared, Ultra Voilet Rays. Chemical properties: We manufacture rubber Gaskets to withstand/resistant destructive effect of most of the organic & inorganic fluids. Rubber Gasket for any type and make for plate heat exchanger not shown herein can be developed & manufactured by us within a specific period. Our plate heat exchanger gaskets manufacturing range varies from 200 mm. to 3000 mm. length i.e. smallest to biggest.

A "Heat Exchanger Gasket" is a term that has been giving to the gasket that is called out for use in an exchanger. The make up of the gasket or type varies due to the operating conditions of the exchanger. Metallic gaskets can come in different types like Double Jacket, Single Jacket, Solid Metal or a Spiral Wound. Soft compressible material can be Rubber, CAF, PTFE, or Non-Asbestos Compressed sheet type. Single Jacketed GasketsThe filler material is enclosed in a metal jacket which covers the inside and outside diameter of the gasket. Double Jacketed GasketsThe filler material is completely enclosed by a two piece metal jacket, which covers both the inside and outside diameters and both contact surfaces. Soild Corrugated Metal GasketsAs the name suggests, the solid corrugated metal gasket is comprised solely of metal and does not contain any non-metallic fillers in its construction. The temperature limitation of the gasket is therefore only effected by the metal selected.

• Material: Rubber
• Packaging Type: Box
• Color: Black
• Thickness: 1-10 mm
• Elongation: 120-170%
• Hardness: 20-45 Shore A

Metal jacketed gaskets specially designed as Heat Exchanger Gaskets are widely used on smooth flange applications. They are ideal for Heat Exchangers, Auto claves, columns, flue stacks, boilers, gas mains, valve bonnets, pumps and similar services. Camprofile gaskets used as Heat Exchanger Gaskets consists of a metal core with concentric grooves on either side with sealing materials. The Sealing layers (depending on the service duty) can be Graphite, PTFE (Teflon), CAF or Metal (e.g. Aluminium or Silver). Camprofiles can be used without sealing layers to provide an excellent seal but here is a risk of flange surface damage. The Very wide seating stress range (minimum to maximum stress) of the Camprofile gasket makes it Highly suitable for varying temperature and pressures. Less sensitive to assembly faults Suitable for light and heavily constructed flanges. Depending on layer material Camprofile gaskets are resistant to temperature upto 1000° C Resistant to media pressures upto 250 bar When assembled the layer thickness of the sealing material is extremely small (0.5mm) thus reducing leaks, reject rates and environment pollution. The gasket will not damage the flange surface and can be easily removed Camprofiles will not damage the flange faces even at extreme seating load. Excellent performance when subject to fluctuating temperature and pressures. Direct replacement for existing gaskets. No special flange finish is necessary.   CLADDING METAL Soft Iron, S.S. 304, S.S. 316, S.S. 304L, S.S. 316L, Low carbon steel, Monel Aluminium, Copper, Brass, Cupronickel 90%/10%, 70%/30%, Inconel 600,800 and different grades of Stainless Steel. FILLER Common filler materials used are Asbestos mill board, CAF, Non asbestos, PTFE and Grafoil. We have adequate capacity to produce any shape and size with many compartmental ribs out of different materials for heat transfer equipment, coolers, condensers, joints etc.Heat Exchanger gaskets are more compressible than sole-

• Material: Viton Rubber
• Thickness: 2mm
• Color: Black
• Shape: Rectangular
• Country of Origin: Made in India
• Usage/Application: Plate Heat Exchanger
• Temperature Range: -20 to 120 Degree Celsius

die cut gaskets, Inflatable Seals, Bulb Seals, fabric seal, orings

Barcode Printer, posi lock bearing pullers, ceramic fixed blade, Bearings

Heat Exchanger Gaskets, PVDF Products, Boron carbide, instrumentation tubes

Rubber Heat Exchanger Gaskets, Rubber Flange Gaskets, EPDM RUBBER GASKETS