Heat Exchangers Dealers in Goregaon East, Mumbai

We are prominent manufacturer and supplier of Heat Exchanger. These Heat Exchanger stand out for their durability and the functionality makes our Heat Exchanger suitable for various industrial applications like space heating, refrigeration, air conditioning, power plants, chemical plants, petrochemical plants, petroleum refineries, natural gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiatorcoils and air flows past the coils, which cools the coolant and heats the incoming air.

• Country of Origin: Made In India
• Color: Black
• Material: Plastic
• Surface Finishing: Color Coated
• Thickness: 3 Mm
• Brand Name: Flexi
• Length: 19 Inch
• Usage: Industrial

We make available our Glass Heat Exchanger in two categories, namely Coil type and Shell & Tube type. It can be used for variety of applications such as condensation, cooling, heating, boiling and suitable combinations of the above. Moreover, the selection of equipment depends upon the type of application, heat load, availability of heating/cooling media and various other factors. Moreover, our Glass Heat Exchanger is reasonably priced. Functioning :In all types of glass Heat Exchangers the heat transfer is through the wall of the glass tube. The heat transfer co-efficient can be of a moderate order because of low wall thickness. With 1.5 mm thick walled tubes, the wall heat transfer co-efficient is about 725 Kcals/hr m2oC and we can obtain an overall heat transfer co-efficient for steam condensation with water-cooling as about 550 Kcals/hr m2oC. The allowable pressure inside the tubes can be vacuum to 3 kg/cm2 while that on the domes as well as on the shell depends upon the size of the shell corresponding to the values mentioned in technical specifications. The Heat Exchangers can safely be used up to 150oC with the limitations of thermal shock up to 120oC and temperature gradient across the wall less than 50oC. The shell side pressures on metallic shell & tube heat exchangers can be as high as 2.5 kg/cm. For higher pressure requirement up to 4 kg/cm2 , the PTFE tube sheets need redesigning and can be made on special request.Available Types : Coil Condensers Product Coolers Immersion Heaters Boilers   Coil Condensers, InformationComposed completely of glass, coil heat exchangers are typically used as vapor condensers and liquid coolers. They are usually designed and installed as an integral part of a vertical column. To provide a reliable corrosion resistant internal seal, the coil battery is sealed to the jacket, creating a single unit. Boilers and immersion heaters are also available in this all-glass coil design.Other   DesignsWe also offer glass cascade coolers, bayonet and jacketed-type heat exchangers. For further information on these special application models, please contact us.Technical  Data Heat Transfer in CondensersThe heat transferred in coil condensers con be considered generally as 55 Btu/hr-ft2-oF for any unit. This figure may vary from 10 to 72 Btu/hr-ft2-oF depending on the fluids involved and the operating conditions.

• Size: 5-10inch
• Type: Stainless Steel Nozzles, FRP
• Material: Stainless Steel, FRP
• Shape: Square
• Thickness: 10-15mm
• Color: Any
• Country of Origin: India
• Brand Name: NEWTECH

Water Chilling Plant,Air Cooled & Water Cooled Chilling Plant,FRP Cooling Tower , FRP Basin, PVC Fills , Aluminium Fan, Cooling Tower Motor, Repair & Reconditioning of any make Cooling Towers. Deep Freezer

We manufacture all types of heat exchanger as per customers requirement and specifications. We execute orders in various materials including Alloy Steels, Stainless Steel and also possess expertise to manufacture in any other special material if required. The heat exchangers are relatively economical to manufacture and can be used in a variety of ways, depending on the operating conditions. We are capable of manufacturing Heat exchangers from design to fabrication. We have supplied shell and tube and Finned tube type heat exchangers. Products can be manufactured and tested as per TEMA, ASME Sec VIII, MSME/API quality standards.

• Type: Heat Exchanger Tube
• Material: Aluminum
• Application: Air, Oil, Water
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Color: Shiny SIlver, Silver
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Warranty: 1 Year, 2 Years
• Temperature: Heat Exchangers, Heat Exchanging Machine
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

Units can be provided in accordance with ASME Sect. VIII, Sect. V and Sect. IX of the Boiler and Pressure Vessel Code, TEMA, API, HEI, and 3A Standards.Capacity : 0.2m2 to 100.0 m2 in M.S. S.S. 304, S.S.316, Material shell & Tube type, Higher capacities can also be provided.Model : cGMP construction with preinsulation of Jacket with mirror finish for API Producing & Standard Construction for Non Pharma processes.

• Electronics: Heat sink is a passive heat exchanger

In electronic systems, a heat sink is a passive heat exchanger that cools a device by dissipating heat into the surrounding medium.Heat sinks are used with high-power semiconductor devices such as power transistors and optoelectronics such as lasers and light emitting diodes (LEDs), where the heat dissipation ability of the basic device is insufficient to moderate its temperature.

We are actively engaged in offering a wide assoretment of Coil Type Heat Exchanger in Maharashtra, India. Our Heat Exchanger is manufactured using the finest quality glass tubes. We make available Heat Exchanger with different technical specifications as per the requirement of buyers. Durability, flawless performance and longer functional life are some of the key features of our Heat Exchanger. Our Heat Exchanger is easy to use and require low maintenance. Technical Specifications : All Glass items shown are manufactured from borosilicate glass 3.3 are widely used as the basis for the construction of complete process systems all over the chemical, dyestuff, food pharmaceutical, and petrochemical industries. The abbreviation for the coefficient of linear expansion which is (3.3 ± 0.1) x 10-6 K-1 . This is lower than any other industrial glass. Since this glass expands less, the tensile stresses in the glass wall during heating are less, which means that it is able to withstand a greater thermal shock and the maximum working pressure for a given operating temperature is greater.One reason for this widespread used is the special properties of borosilicate glass 3.3 (see below), complemented by the use of other highly corrosion resistant materials such as PTFE and ceramics Brief about product : Glass lined reactor is FDA approved equipment which can be installed in Flame Proof / Explosion Proof Areas of a chemical plant for large scale operations where operating parameters within the GLR are higher than glass assemblies because large volumes are handled. Here high pressure steam can be used as heating medium on glass lined reactors. Glass distillation assemblies of various types can be installed on these reactors as per the process requirements . The basic features of such assemblies remain the same but coil type heat exchangers can be replaced with higher capacity shell & tube heat exchangers

• Type: Coil,Air-Cooled,Tube
• Application: Hydraulic and Industrial Process,Pharmaceutical industry,Food Process Industry
• Brand Name: Ascent
• Feature: Sturdy construction, High efficiency, Highly durable .
• Tube Material: Steel
• Primary Exchanger Material: Steel

Blue chip natural Draft Towers assures maximum cooling capacity per cubic foot of tower volume due to its efficient spray system design. Better area utilization is achieved by use of proper size nozzles and pattern determination on the basis of theory test & experience.

The indigenous innovative was adopted by the industry for very good reason. Due to ever increasing demands for Power Generating Station and the Chemical Process Industries. The relevant Counter flow tower with wood splash bar stats become increasingly large, cumbersome and more efficient. The configuration of Cooling Tower consist of ASCU Treated Timber to resist the contaminated water from the process industries. It is money saving and energy conservation strategy to over size your Cooling Tower for cold water.

• Usage: Industrial
• Max Output Flow Rate: 10-20 m3/hr
• Frequency: 50 Hz
• Voltage: 380 V
• Primary Exchanger Material: Steel

President offers easy snap-on blanking panels which can be mounted effortlessly in free rack spaces.The panels are tool-free devices with ergonomic finger grips that eliminate the need for a user to struggle with his hands and fingers to fix the ends of the panel using screws.

Blue chip offers treated timber factory assembled packaged type induced draft cooling tower upto 100 TR capacity. These towers specially designed to deliver highly reliable operation under corrosive atmospheric condition. The fan is of Axial flow type and is directly driven which saves from the perennial headache of V-Belts.

• Type: Shell Tube Heat Exchanger
• Material: Gun Metal, Metal, Mild Steel, Stainless Steel
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg
• Color: Blue, Brown, Green, Grey, LIght White, Silver
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Power: 1-3kw, 3-6kw
• Warranty: 1 Year
• Driven: Electric, Fuel

• Application: Heater
• Pressure: 16MPa
• Warranty: 2 Years
• Weight: 0.6-31.8kg
• Applicable Industries: Hotels, Garment Shops, Building Material Shops
• Voltage: 220/380v
• Condition: New

A heat Exchanger is used to transfer the Heat from one medium to another. They are widely used in space heating, refrigeration, air conditioning, power plants, chemical plants and natural gas processing.

Since 1981, we at Dipesh Engineering Works have been designing and supplying a variety of coded and customized heat exchangers for a wide range of process industries, including Pharmaceutical Industries, Chemical & Fertilizers Plants, Oil & Gas Industries, Petrochemical Industries, Food & Dairy Industries and Desalination Plants for global clients. Our range includes Shell & Tube, Double Pipe, Helical, Fin Tube type, Coiled Pipe, Hair Pin Type and Spiral Plate heat exchangers with surface area ranging from 0.5 to 5000 sq. mtr., operating in pressure of up to 200 kg/cm2g and temperature of up to 600oC. We make equipment in a variety of materials such as Stainless, Low Alloy, Duplex / Super Duplex, Carbon Steels, Super alloys such as Inconel, Hastelloy, Monel, Nickel, Copper, Cupro Nickel, 904L, Alloy 20, Aluminum Bronze, Aluminum and Titanium in our segregated shops.     Our Knowledgeable and experienced team is equipped with world class optimization designs tools so that they can offer you competitive quotes and supply heat exchangers that provide trouble free performance and significant bottom line benefits in the long run. With over 100 trained and highly experienced engineers, backed by more than 400 skilled technicians and six modern plants, we are ready to serve you.