Heat Exchangers Dealers in Kalbadevi, Mumbai

Surecon has tied up with reputed Japanese and Korean heat exchanger manufacturers and business houses. These companies have over five decades of experience with a production capacity of various grades - including high grade steel fabrication and have ASME certifications. The following services can be provided: Design and Engneering Raw Material Procurement Equipment Fabrication Quality Management ServiceProducts: Shell & Tube Heat Exchanger Kettle Type Heat Exchangers Fuel Gas Boiler Gas Compressor Skid Package Fuel Gas Heating Skid Package Plate Type Heat Exchanger Heat Transfer Equipment Process piping Material Grades: Carbon Steel, Stainless Steel, Aluminum Brass, Copper Nickel, Duplex, Super Duplex, Incoloy, Nickel Alloy, Titanium etc. Certification / Compliance: ASME : SEC. VII Div. 1 "S" , "U" and "U2" Stamp, B 31.3, B31.1 TEMA 'B', TEMA 'C' & TEMA 'R' API660, API661 & API650 ISO 9001 Design capabilities and software: HTRI thermal design package PVElite Mechanical design package In-house manual program software Work Scope: Our tie-ups provide consultancy services to remedy corrosion problems and recommend preventive measures than can be taken. Pre-commissioning cleaning of boiler & boiler systems; process & utility piping, exchangers, storage tank, etc. System oil flushing of hydraulic systems, lubrication oil systems, fuel oil systems, etc. Ultrasonic cleaning of air coolers, condensers, heat exchangers, engine parts, filters, etc. High pressure water jet cleaning for heat exchangers, condenser, boilers, etc. Oil-free degreasing of medical, air conditioning, refrigeration and LPG Piping. Cleaning and maintenance of (HVAC) systems for building heating, ventilation and air conditioning. Cleaning and sterilizing of process water tank and its associated piping lines.

Pennant condensate pump (PCP10) is an excellent alternative to standard electric pumps which are not suitable for pumping hot condensate. It is a complete non-electric solution designed to lift condensate to the boiler feed-water tank using small quantity of motive steam.

Complete line of Copper Alloy C71500 inventory as noted below.CValve Bodies, Sea Water Service, Sea Water Condensers, Salt Water Pipe Fittings, Water Boxes - Salt Water Applications, Salt Water Flanges, Salt Water Piping, Pump Bodies and Internal Parts-Sea Water, Fittings, C71500 - Copper Nickel 30% is used for its corrosion resistant properties.

QUALITY METALS SUPPLIERS IS A LEADING STOCKIEST & EXPORTERS OF specialty welded tubing for heat transfer applications like condenser, feedwater heater, LP heater and HP heater etc. on its state-of-the-art, PLC run tube mills. All operations like forming, seam welding, bead rolling, sizing, OD seam polishing, bright annealing, straightening, NDT checking, dimension control, continuous marking and cut-off are done online and automatically. These fully integrated and perfectly synchronized processes result in a very high and consistently good quality of products. Whether it is the surface finish, dimensional accuracy or the welding integrity, the tubes made on these mills meet the highest quality standards. The customers are able to rely on these products for their critical usages with complete peace of mind. We are exporting this material in more then 40 countries like UAE, Egypt, Turkey, Singapore, Malaysia, Iran, Iraq, Saudi Arabia, Bahrain, Qatar, yemen, Kuwait, Argentina, Palestin, Algeria, Italy, Tunisia, Oman, Mauritania, USA, Bangladesh, Lebanon, Canada, Vietnam, INDIA, Sudan, Syria, Morocco, Libya, Jordon, and many more at very much affordable price. READY STOCKS AVAILABLE OF FOLLOWING BRANDS: 1) SUMITOMO METAL INDUSTRIES LTD (JAPAN)2) KOBE STEEL (JAPAN)3) SANDVIK (SWEDEN)4) RATANMANI METAL & TUBES LTD (INDIA)5) REMI STEEL (INDIA)6) MAHARSHTRA SEAMLESS LTD (INDIA)7) ISMT (INDIA)8) JINDAL SAW LTD (INDIA) Features : High strength Corrosion resistance Excellent flow characteristic Superior finish Ideal for high temperature and pressure applications

• Type: Heat Exchanger Tube
• Material: CARBON STEEL, STAINLESS STEEL ,DUPLEX STEEL , TITANIUM STEEL,CUPRO NICKLE
• Certification: ISO 9001:2008 Certified
• Application: Heat Exchanger Tubes
• Grade: AISI, ASTM, BS, DIN, GB, JIS
• Brand Name: PUSHPAK
• Thickness: 0.5 TO 12 MM
• Length: 3m 6m, 12m & custmise
• Outer Diameter: 9.52 TO 114.30 MM
• Steel Grade: ASTM A 179 / 210 / 192 DIN 2391

• Material: Aluminum
• Shape: Rectangular, Round, Square
• Thickness: 0-3mm, 3-6mm
• Color: Silver
• Feature: Durable, Fine Finished, High Strength, Sturdy Surface
• Temperature: 0-50deg C, 50-100deg C

Buy, from us, Aluminium Heat Sink fabricated using high-grade aluminum. Aluminium Heat Sink is widely appreciated for their ability to absorb and also dissipate heat from another object using thermal contact. We also offer Customized Aluminium Heat Sink at the affordable prices and are capable of handling bulk orders as well.

• Brand: MMC
• Material: Brass
• Shape: Round
• Wall Thickness: 2-10 mm
• Single Piece Length: 3 meter, 6 meter
• Surface Finish: Polished

We supply pre heating unit which is helpful in thinning the furnace oil.

• IS1239: BLACK
• A 106: BLACK

• Shape: Rectangular, Round, Square
• Brand Name: All Brand
• Size: All size
• Minimum Order Quantity: 100 Kilogram

We are a prominent Manufacturers, Suppliers, and Exporters of Integral Finned Tubes. These Integral Finned Tubes come with superior dimension accurateness, sturdy construction, and fine finish. Integral Finned Tubes can improve the thermal performance of a heat exchanger without the changing shell size, flow arrangement or the repositioning of piping. We offer Integral Finned Tubes in different specifications to meet divergent demands of the clients.Integral Finned Tubes are suitable to be used in such applications where extended surface is required, but lack of space or heat exchanger type dictates otherwise. The external surface of the Integral Finned Tubes is enhanced by the formation of ''low fins'' by direct extrusion from the material of the base tube. Highlights : Smooth finish Accurate dimensions Sturdy construction Corrosion resistance surface Availability : Available materials are stainless steel (304L, 316L, 321(H), 304H, 310 etc.), duplex, copper alloys, nickel alloys, hastelloy and titanium Size range / Dimensions : Tube size : 12,7mm, 15,88mm, 19,05mm and 25,4mm Fins per inch : 16, 19, 26, 28, 30, 32, 36, 40 and 43 fins/inch dependant on material Qualities : Non-destructive eddy current examinationAir under water testingHydrostatic testing (with fluorescent dye)Fin profile examination at 50x magnificationDimensional & ring gage checks In specifying finned tubes you should advise : Number of finned tubes requiredOutside diameter of tubeTube thickness or thickness required under root of finLength of finned tubeNumber of fins per inchUnfinned endsSkipped portions and dimensions from one endMaterial of tube In specifying U-tubes you should advise : Tube diameter, thickness and materialStraight leg lengthCentre line radius (or diameter) and number off per rowWhether post bend heat treatment is requiredWhether hydraulic testing is required

• Material: Stainless Steel
• Shape: Round
• Type: Welded, Seamless
• Unit Length : 3, 6 meters
• Surface Finish: Polished, Sand Blasted, Mill Finished
• Pipe Fluid: Chemical
• Material Grade: SS316L, SS304, SS316

• Brand Name: Maxell Steel & Alloys
• Material: Aluminium
• Type: Plates
• Place of Origin: Mumbai  
• Unit: Trader
• Packaging: Bulk

We are offering aluminium plates. We are the stockist of aluminium plates. If you any requirement kindly send us your precious enquiry through mail. We will give you our best competitive rates.

We are recognized as the prominent organization of optimum quality Aluminum Heat Sink. Other details: Aluminum Heat Sinks is used to absorb and dissipate heat from another object using thermal contact which can be either direct or radiant Aluminum Heat Sinks are used in a wide range of applications wherever efficient heat dissipation is required Features: Sturdiness Excellent durability Rust proof

We are offering Build strong relationships with our customers � which we achieve, for example, by employing and training local workforces.Develop trust in our reliability and integrity � which we are reinforcing, for instance, by developing a global compliance network.Manage risks more effectively � as we do with the social and environmental impact asessments that we carry out in all geographies.establish strong employee engagement.

• Brand Name: Energy Economics
• Material: Mild Steel
• Technique: Condnsate Pumping
• Working Pressure: 3kg/cm2
• Mounting Type: Foot/ pit
• Application: Food Process Industry
• Medium Used: Steam, Air
• Surface Finishing: Powder Coated

• Material: Hastelloy Monel Admirality Brass Nickel Duplex Titanium Chrome Moly Stainless Inconel Zirconium
• Condition: Good
• Brand Name: Chemtech
• Product Name: Heat Exchanger Tubes
• Place of Origin: Mumbai
• Min. Order Quantity: As per Client Requirement

Ferrules, Sleeves, Inserts and Liners for heat exchangers, condensers and boilers. Our custom manufactured products will prolong the life of your equipment and increase unit reliability. Our inserts can be made from a variety of materials to your exacting specifications as a standalone or can be combined with our expert installation. MATERIAL Hastelloy Monel Admirality Brass Nickel Duplex Titanium Chrome Moly Stainless Inconel Zirconium Carbon Steel Alloy 20 Copper Nickel And more

We make certain that the offered array of products is sternly packed and delivered safely to the customers' stated address and that too in the committed time span. We are instrumental in offering extensive range of products that is in compliance with the internationally accepted standards. Thus, the final products are of excetional quality.

• Material: Aluminium
• Shape: Rectangular
• Brand Name: Gautam Tubes
• Material Grade: 6061, 6082, 6063
• Finishing: 2B,BA,2D Finish

We are the leading manufacturers, exporters and supplier of this products.

• Material: Copper - SB111 UNS NO. C - 12200
• Country of Origin: Made in India
• Brand: MPJ
• Wall Thickness: 1.00mm up to 1.32mm.
• Diameter: 15.88mm, 19.05mm, 25.40mm
• Finning: As per SB - 359

• Material: Aluminum
• Shape: Rectangle
• Color: Grey
• Technics: Cold Drawn
• Width: 1-100mm
• Surface Finishing: Polished

Ashapura steel & alloys fabricate stainless steel pipes which are widely used in construction business, automobile parts manufacturing, petrochemical industries etc and this ss pipes are available in standardized dimensions of welded pipes. Ss pipes are available in 18 to 12 inches nominal pipe size and confirm to the type ansiasme 36.19m. Ss pipes are made using quality materials that are further powder , polished to make them durable, corrosion resistant and also rust proof. Ss pipes are available in numerous specifications according to the requirements of our customers.

We offer stainless steel pipe. Our range stailess steel pipe as per pipe size od size 1/4" to 48" and nb size 1/4 nb to 48 nb. All size and grade standrad 202,304,304l,316,316l,316ti,317l,904l,309,310,hast-alloy, alloy-20, monel,inconal,and std sch-5, sch-10,sch-40,sch-80,sch-160,sch-xx and inch 20 swg,18swg,16swg,14swg,12swg,10swg etc.