Heat Exchangers Dealers in Vikhroli, Mumbai

We exports Extruded Fin Tubes which are manufactured by cold rotary extrusion process. The Extruded Fin is formed from an outer aluminium tube with a large wall thickness, which is aligned over an inner base tube. The two tubes are pushed through three arbors with rotating discs that literally squeeze or extrude the aluminium fins up and out of the muff material in a spiral shape in one operation. The process of extrusion hardens the fins and prevents dissimilar metal contacts at the fin root. The exposed external surface is aluminium and there are no minute gaps between adjacent fins where moisture can penetrate. This ensures good efficiency that is expected when using an extended surface for heat transfer. During the finning process a tight mechanical bond is made between the finned aluminium outer tube and inner base tube of the required metal.

unraj Industries Exports wire wound Fin Tubes or Turbulators made of loops of wire wound helically on a central rod or tube and soldered to the inner surface of the tube. The internal turbulators are made of stainless steels, copper and galvanized steel wire. Sunraj make wire wound turbulators for tubes of inner diameter as low as 8 mm. There being no limit on higher diameters and lengths.Wire wound turbulators are excellent tube heat transfer enhancement devices that increase the tube side heat transfer coefficient several fold at not too high pressure losses. Wire wound fin tubes for use in air cooled oil coolers are provided with internal fins selected from wide variations in configuration. We also manufacture double pipe wire wound fin tubes for use in refrigerated air dryers and heat exchangers for viscous and small streams. Wire wound fin tubes can withstand temperature up to 180ºC with standard solder wire. However for high temperature application it can withstand temperature up to 290ºC. This is with the use of special silver content solder wire.Wire wounded tubes can be manufactured by using various base tube material such as Carbon Steel, Copper, Cupro—Nickel, Brass and Alu. / Adm. Brass, Stainless Steel with fins of Copper, SS 304, SS 316, C.S & G.I

We offer heating skids. ‘nirmal’ has experience in design, engineering and supply complete heating skids for natural gas applications. Pre-heaters are used in gas distribution network skids or in fuels gas conditioning skids of power plants. Natural gas is heated to a higher temperature to compensate the temperature drop arising due to pressure reduction and to meet the specific temperature requirements by the downstream processes. Increase of temperature improves the fuel combustion and increases flame temperature in case of furnaces.

• Country of Origin: Made in India
• Material: Mild Steel
• Voltage: 230 V
• Current: 15 A AC
• Automation Type: Semi-Automatic
• Outer Tube: 25 mm
• Inner Tube: 12.5 mm

Product Brand: Pathak/ Meta-Lab Round / Rectangle in shape, made of cast iron machined to a smooth and leveled surface. Body: Attractive, Rectangular, stout and made of mild steel. Finish: Painted with enamel paint. Heating: Heating Specially designed electric heating element. Temp. Range: Maximum surface temperature 350°C.   Control: 3 Heat Switch / Energy Regulator / Thermostat Total Rating: 1.5 kw

• Material: cotton
• Feature: Lightweight, easy to activate, and durable , 100% cotton vest, with a thermal liner
• How to use it: Freeze the cooling inserts in the freezer for Approximately 35 minutes, Keep the inserts in the pockets of the jacket, Wear the jacket .
• Sizes: M/L & L/XL sizes available
• Colors: Blue
• Closure Type: V-neck w/ zipper closure, hook and loop girth and side/shoulder adjustments

• Working Pressure: As per customer requirement
• Specialities: Cost efficiency, Durability, Reliability
• Finishing: As per customer requirement
• Color: As per customer requirement
• Temperature: As per customer requirement
• Material of Construction: Steel

Murzello manufactures the following Equipment for Abrasive Recovery: - Mechanical Recovery - Vacuum Recovery

A] Air Compressor - Spare Parts 1] INGERSOLL-RAND :- [ IR- T-30 SS NL LPG Series ] 2] INGERSOLL-RAND :- [IR- ESV ESH IHE PHE LLE HSE XLE- Series ] 3] ELGI Compressors : - [ ELGI- SC TC THPC HV SS TS HP Series ] B] Other Air Compressors- Spare Parts 1] FOUJI :- [ FOUJI- MB SMB FI FID MBD ] 2] AIR-MARSHAL :- [AIR- MARSHAL- GC-305V , GC-294 , GC-7150 , GC-2595 ] 3] BOSS :- [ BOSS- MB SS SD ST TD TT HT HP ] 4] INDO-AIR :- [INDO-AIR- IA IAV ] 5] JK PNEUM :- [JK PNEUM- 25S , 50S , 75L , 100L , 75H , 150H ] 6] PARKEEN :- [ PARKEEN- SA SB SF SS SV TCA TCB TCI TCK ] 7] PNEUMECH :- [ PNEUMECH- PM PMF ] 8] ZEN AIR :- [ ZEN- 75H 150HH 75L 125L 25S 50S ] C] Screw Compressor - Spare Parts 1] Ingersoll-Rand ELGI Atlas - Copco CP Kirloskar Khosla Kaser Sullair Boge D] Refrigeration Chilling Compressor - Spare Parts 1] Accel Sabroe Carrier Voltas Grasso Kirloskar Stal Thermoking Trane Vilter All the Models Refrigeration Chilling Compressor Spare Parts E] Marine Compressor - Spare Parts 1] Sperre Tanabe Hatlapa Hamworthy All the Models Marine Compressor Spare Parts We do Export our product to Asian countries, Middle East, America, Canada, Europe etc. Countries. We aim to explore new avenues and conquer new frontiers.

Highly demanded in the market, we offer custom engineering capabilities Heat Exchangers that are made from finest carbon steel. Since 1996, we are a well-known Manufacturer, Exporter and Supplier of high performance Heat Exchangers. Made in compliance with all quality standards, our quality assurance team makes sure that Heat Exchangers are energy efficient and have long service life. With a vast distribution network, we are capable of delivering all orders on time. For competitive prices, contact us.    Dimensions : The diameters vary from 300mm (12") to 760mm (30"), lengths vary from 750mm to 6000mm. Shells up to 300mm (12") are made from welded pipes and above 300mm are made from rolled plates. Water heads are fabricated from M.S. plates.   Capacities : From 10KW (3TR) to 1750KW (500TR)

We offer heat exchanger tubes. These heat exchanger tubes mainly find applications in pressure vessels, cryogenic pressure vessels, high pressure equipments, tube sheets of heat exchangers, boilers, air pre heater, finned tubes, air cooler tubes, etc. They are used in industries like refineries, power plants, steel plants, chemical factories, fertilizer plants, and ship building etc. Theses seamless tube can be manufactured in straight lengths or u bent as per the customer requirements. Astm : - a 179, a 192, a 210 (grade a1, c), a 334 (grade 1, 6), a 209 (grade t1, t1a), a 213 (grade t5, t11, t12, t22), a 556 (grade g, c) bs 3059 : - part I (grade 320), part ii (grade 360, 440) din :- st35.8, st45.8, 15 mo3, 10crmo44, 13crmo910 pipe :- astm : a 106 (grade a, b, c), a 335 (grade p5, p11, p12, p22) is : 1239 : medium & heavy

• Type: Shell & Tube
• Usage: Pharmaceutical industry
• Material: SS, Hasteally, Titanium
• Medium used: Water
• Brand Name: Economy
• Capacity: Single HE 200 Square Meter Area
• Material Grade: SS 304/321/316L, Hast C-276, Hast C- 22, Duplex Steel, Titanium, 904 L
• Higher Temperature: 900 degree C

Air heat exchanger adopts advanced craftwork of complex technology and achieves the optimal Heat exchange effect. It is the optimum selection

We gained expertise in Design, Manufacturing and Testing of all kind of Shell & Tube Heat Exchangers. We fabricate Stacked unit with special care so the weight of the upper unit transmitted through saddle supports only keeping all inter connecting nozzles without any external load. Gas Leak Test carried out with Helium Mass Spectrometer @ 1 x 10-7 Std. cc/sec.

Features: compact design sturdiness non corrosive.

• Type: Fin Tube
• Certification: "U"and R"Stamps, TUV Stamp
• Packaging Details: Wooden Packing , Crate Packing
• Supply Ability: Custom Built
• Brand Name: EMHT

COMPRESSOR AFTERCOOLER / HEAT EXCHANGER / INTERCOOLER   1) Shell & Tube Design & Water Cooled. 2) Tube bundle removable type & fixed type 3) Vertical type & Horizontal type (version) 4) Air Flow 10 to 10,000 cfm or Higher on request 5) Pressure up to 100 kg/cm2 6) Built as per India & International codes

Based in Mumbai, we are a trusted Manufacturer and Supplier of Heat Exchanger. We fabricate the Heat Exchanger using advanced technology. Our Heat Exchanger is tested against different quality parameters to ensure its superior performance. We offer Heat Exchanger that promises recovery of wasted heat in an effective manner. Why Our Heat Exchanger? Energy-efficientRequires less spaceReduces pollutionQuality materials used

• Type: Forced Draft Heat Exchanger DX or Chilled water
• Capacity: 1 to 100 TR (Any tailor made design,size, pattern or sample)
• Construction: Seam jointing / Welded Tube - CopperPlain & IG / SS-304 / MSFins – Aluminium / SS-304 / Copper / GIBody – GI / Al / SS-304
• Features: Heavy duty designed with suitablematerial to deliver best efficiency
• Application: Air Conditioning / Refrigeration /Industrial Heat rejection-absorbtion

TUBES : Bright Annealed Copper : 38” , ½ ” , 58” Wall ; Thk 0.4 - 0.55mm Aluminum Copper Fins , sine wave type 0.11mm - 0.4mm Chilled Hot Water ; Brine & Dx ( Refrigerant ), Steam Anti Corrosive Hydrophilic ; Blue , Gold , Red Frame : G.I. , S.S. , Al , Cu Header Pipes : G.I. M.S. S.S. Cu Hydraulic Mechanical Expansion OPTIONS Available with 3 - 6 pass PVC AL Steel Mist Easy Pull out roller based system MAX SINGLE SIZE 12 Row Deep

We are manufacturer of compressor gas coolers. These coolers are usually used to cool compressed gas. Typically such gas coolers consist of modules to cool gas, water and lude oil. Normally there gas coolers are of horizontal or vertical type further they can have Electric motor, engine drive or hydraulic drive configurations, Single or Multiple fan, Forced or Induced draft.

• Shape: Round
• Thickness: 1/2 to 24 inch
• Size: 1/2 inch

we supply all types of silicon rubber thermal conductive sheets and pads with adhesive and without adhesive

dry cooler, air conditioning condensers, Copper Fin Coil, ac evaporator

• Material: Aluminium
• Brand Name: Furukawa Electric
• Color: Black
• Surface Finishing: Matte

• Steel Grade: SS316 SS304
• Thickness: 0.5 - 4 mm
• Brand Name: Technolloy Inc
• Shape: Round
• Country of Origin: Made in India
• Diameter: 15 - 200 mm
• Unit Pipe Length: 6 meter
• Surface Finish: Finished Polished
• Usage/Application: Manufacturing Unit

• Material: Stainless Steel
• Application: Cleaning
• Country of Origin: Made in India
• Size: Customized
• Bristle Material: SS

• Type: SHELL & TUBE
• DIA: 1800
• LENGTH: 8000
• NO. OF TUBES: 1500
• MOC OF TUBES: ASTM A 213 TP 304
• MOC OF SHELL: ASTM A 516 GR. 70
• WT: 50 MT