Heat Protection Wear Dealers in Ghatkopar, Mumbai

Fire safety suit is also used for higher temperature. Outer fabrics tested and approved by Defence Institute for Fire Research New Delhi & field tests performed by Defence-Indian Navy NBCD School, INS Shivaji.

Nomex Fire Retardant Boiler Suit Manufacturer, Industrial Boiler Suit Exporter, Industrial Boiler Suit Workwear Supplier, Nomex Fire Retardant Boiler Suit Coverall from Mumbai, India

We hold expertise in offering a wide range of Boiler Suits, which is available in an array of colors like royal blue, beige, green, grey, light blue, sky blue, petrol blue, navy blue, orange, red, white, yellow and khaki.  

• Material: Polyester
• Size: Small, Medium, Large
• Sleeve Type: Full Sleeves
• Product Type: Overalls
• Wash Care: Machine Wash

• Gender: Unisex 
• Product Type: Overalls
• Usage/Application: Industrial
• Size: All Sizes
• Pattern: Plain
• I Deal In: New Only

Suit made of multiple layers for maximum heat protection. Breathing apparatus required. Suit consist of :- HOOD: Designed to be used with air mask. Inner drape flame seals. Underarm adjustment straps. Built in shell for structural support. Hard cap with ratchet headgear. Speedy clip for hard cap support. Hardened aluminum window frame with 2 tempered glass lenses plus 2 gold plated Lenses for thermal protection.

ALUMINISED FIRE PROXIMITY SUIT Manufacturers, Suppliers & Exporters Alugen® Aluminised Fire Proximity Suits are manufactured in compliance to meet stringent ISO 9001 standards. The fabric used to produce Alugen® suits are from GENTEX's proprietary Dual Mirror® / Flexir®Aluminized Fabrics, Imported from USA, which reflects 95% of heat and ensures superior protection and performance in the extreme work environments faced by civilians, emergency service, homeland defense and military personnel. Alugen® Aluminised Fire Proximity Suits offer an efficient solution to working in high-temperatures with superior durability.The most critical part about the Aluminised Fire Proximity Suit is the intactness of Aluminium on the outer layer of the suit as it reflects 95% heat, thereby allowing the wearer to remain much longer in proximity to heat & fire. The durability of Aluminisation on fabric can be confirmed by conducting a test named “Wet Flex” test. The procedure goes as follows,  The fabric is dipped in 60°C hot water for 15 mins and then 1000 machine abrasion cycles are conducted. There should be no delamination, or peeling off on any part of the fabric. All 'Alugen' Suits are made from fabrics which pass Wet Flex test. Most of the fabrics available in market do not pass this critical test. As a user one should be careful about this. GENTEX's proprietary Dual Mirror® / Flexir® Aluminized Fabrics offers an exceptionally high level of abrasion resistance - the result of its unique, five-layer fabric structure. This proven system ensures that the suit remains highly reflective even after repeated use and proper care and cleaning.   The five layers consist of an outer skin of 1. Aluminum, 2. Protective film, 3. Second layer of Aluminum, 4. Heat-stable adhesive and 5. Base fabric. These individual layers are then combined to form a single fabric. The five layers consist of an outer skin of aluminum, a protective film, a second layer of aluminum, heat-stable adhesive and a base fabric. These individual layers are then combined to form a single fabric (As below).  

• Color: Orange
• Size: Medium
• Gender: Male
• Pattern: Plain
• Country of Origin: Made in India
• Brand Name: French Terrain
• Wear Type: Reflective
• Function: Flame Retardant, Protective Workwear

• Size: L, M, S, XL, XXL
• Type: Boiler Suits
• Material: Non Woven, PVC
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm
• Application: Constructional Use
• Color: Black, Blue, Green, Grey, Orange, White, As Shown In Pictures
• Gender: Female, Male
• Feature: Comfortable, Heat Resistant, Skin Friendly
• Pattern: Plain
• Country of Origin: India
• Neck Type: Collar, Round
• Sleeve Type: Full Sleeve
• GSM: 180 to 290 GSM Fabric
• Waist: 96cm
• Wash Care: Handwash
• Features: Soft, Fadeless
• Packaging Size: 4 Pcs. Per Pack of Different colors

• Size: L, M, XL, XXL
• Material: PP
• Thickness: 1.5-2mm
• Application: Industrial
• Color: Multicolor
• Feature: Anti-Shrink, Heat Resistant, Waterproof
• Pattern: Plain
• Neck Type: Collar
• Sleeve Type: Full Sleeve

We offer high performance Kevlar Fire Suits that is widely applicable in intense heat, fire, steam and hot liquid. These Kevlar Fire Suit are extensively used in the petrochemical plants, foundries, plant, steel, glass, ceramics and defence industry. The Kevlar Fire Suit has been specially developed and field tested for rescue operations.

We are Offering Boiler Suit,Dungri for Workmen.

We offer a wide range of excellent quality products that are designed and developed under the vigil eyes of quality examiners. We are a noteworthy name, engaged in offering qualitative lot of products that are the perfect outcome of premium material and modern work methods. Also, the material is sourced from the trusted places after complete quality checking. Details : Standards - CE EN469/EN340 Outer fabric - Nomex® IIIA. 200g/squre meters Moisture Layer - 50% Nomex®/50% viscose coated PTFE membrane. Thermal layer - Carbon felt laminate wiht 50 % Nomex® 50% viscose comfortable face cloth. Specification : Double cloase front, Velcro fixing device and safety zipper. Throat safeguard design adjust by Velcro ixing device Double supper large pocket on the frock and pants, one radio pocixets on the chest and a Concealed paper pocket between double close fronts. Cuff can be adjusted by Velcro and with fireproof, waterproof and thumb ring design. Extra patches shall be placed to the bottom of jacket's arms to increase the movement capacity. The reflector bands shall be sewed as rounded to the cuffs, foot, chest and the back parts of the jackets. Wasit of the trouser shall be higher at least 30 cm than jacket's foot. Elastic girdle and Elastic suspenders shall be easily opening-locking and adjustable clips. The sewing thread shall be meta arami. Size : S-XXLAvailable Color : Navy Blue

We are engaged in offering superior quality Boiler Suit to the customer. These Boiler Suits are designed as per clients' preferences and requirements by our team of highly experienced professionals. In addition to this, we make sure that the ordered Boiler Suits reach clients' end within the committed time frame via our wide distribution network.

AramidKevlar non woven laminated with PTFE membrane for maximum breathability and hydrostatic head (waterproof) performance. (EN 343 protection against foul weather)Constructed using non-woven ARAMIDE KEVLAR fibers laminated with NomexViscose innermost ling fabric for maximum protection.

• Color: Black
• Gender: Unisex
• Brand Name: NexG Apparels
• Features: Longer life, Lightweight
• Sleeves: Full Sleeves
• Wash Care: Machine wash

Fire entry suit is specially designed for complete protection from fire. Fire entry suits are generally made up 8 layers of insulation In this case boots, soles and hoods are also completely insulated. We manufacture fire entry suits strictly adhering the standards of ISO 9001. Here fire fighter while performing his duty may come in contact with fires where temperature can be more than 2000 ° F. sometimes. Our fire fighting suits are manufactured taking into consideration all these aspects and we can confidently say that they are able to protect fully the user from heat up to 3000 ° F

Series NA2K & Series A3K developed and manufactured by Modern Apparels are engineered to the highest levels of protection to the Firefighters & Rescuers against extreme temperatures. These Fire Entry suits can be used in preparation for possible fire eruption or for stand-by operations should a rescue or evasive action require passage through a fire zone. The Series 2K can withstand temperatures to 1093oC (2000oF) against heat and fire while Series A3K, having Aluminized outer shell can withstand high radiant heat to 1650oC (3000oF).  Applications : Fire Entry Suit are used in various industries like Petroleum, Oil & Gas, Electricity Generation, Steel, Defence, Petrochemicals & Refining and all places where there is hazard of fire eruption and extreme heat generation.  Specification:-Suit made of multiple layers for maximum heat protection. Breathing apparatus required. Suit consist of :- HOOD: Designed to be used with air mask. Inner drape flame seals. Underarm adjustment straps. Built in shell for structural support. Hard cap with ratchet headgear. Speedy clip for hard cap support. Hardened aluminum window frame with 2 tempered glass lenses plus 2 gold plated Lenses for thermal protection. COAT: Designed to be worn with breathing apparatus. Double storm fly Front : Flame seal with drawstring at coat bottom. PANT: High waist design. 2 inch wide adjustable suspenders. Adjustable Straps on leg bottoms. BOOTS: Designed to fit over work shoes. Rear entry with overlap snap closure and adjustable take-up straps. Insulated wire reinforced sole of flame resistant neoprene fiberglass riveted to boot cover. MITTS: Heavy weight construction made with Aluminised fabric.WEIGHT: weight of complete suit will be approximately 25 kgs. CERTIFICATIONS : Made Out Of Fabric Which Are Tested & Passed EN ISO 11612.

Our manufactured fire entry suits are designed in such a way so as to provide maximum personal fire protection. They are useful in fire fighting as well as while passing through a passage affected by fire . These fire entry suits have been provided with minimum 8 layers of insulation.

• Gender: Male
• Pattern: Plain
• Weight: 350 - 1600 GSM
• Closing Type: Zipper
• Number Of Layers: 4
• Thickness (Millimeter): 1-4 mm
• Product Type: Fire Suit
• Sleeve Type: Full
• Suit weight: 11-12 kg
• Heat Resistant Tem.: 650 Degree C
• Hood Material: Fiberglass
• Gloves Size: 14 Inches
•  :  
•  :  

• Size: L, M, S, XL
• Type: Safety Boiler Suit
• Material: Non Woven, PE, PP, PVC
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm
• Application: Constructional Use, Industrial
• Type: Body Suit
• Color: Black, Blue, Green, Grey, Orange, Red, White, Yellow
• Gender: Female, Male
• Feature: Anti Wrinkle, Anti-Shrink, Comfortable, Disposable, Heat Resistant, Skin Friendly, Waterproof
• Pattern: Plain
• Neck Type: Collar, Round
• Sleeve Type: Full Sleeve

industrial boiler suit, Patient Uniforms, Industrial Boiler Suits

Fire Fighting Suit, Safety Shoes, DUST AND FIRE RESPIRATOR, Ear Muffs

industrial boiler suit, Boiler Suits, Patient Uniform, Chef Uniform

Fire Suit, Hand Protection Gloves, Fire Hoses

Fire Fighting Suit, Road Safety Barrier, Foam Equipments, DCP Nozzles

Fire Suit, Gas Mask

Boiler Suits, Safety Helmets, Safety Shoes

Fire Suit, Boiler Suits, portable fire pump, escape chute