Heat Protection Wear Dealers in Mulund, Mumbai

ALUMINISED FIRE PROXIMITY SUIT Manufacturers, Suppliers & Exporters Alugen® Aluminised Fire Proximity Suits are manufactured in compliance to meet stringent ISO 9001 standards. The fabric used to produce Alugen® suits are from GENTEX's proprietary Dual Mirror® / Flexir®Aluminized Fabrics, Imported from USA, which reflects 95% of heat and ensures superior protection and performance in the extreme work environments faced by civilians, emergency service, homeland defense and military personnel. Alugen® Aluminised Fire Proximity Suits offer an efficient solution to working in high-temperatures with superior durability.The most critical part about the Aluminised Fire Proximity Suit is the intactness of Aluminium on the outer layer of the suit as it reflects 95% heat, thereby allowing the wearer to remain much longer in proximity to heat & fire. The durability of Aluminisation on fabric can be confirmed by conducting a test named “Wet Flex” test. The procedure goes as follows,  The fabric is dipped in 60°C hot water for 15 mins and then 1000 machine abrasion cycles are conducted. There should be no delamination, or peeling off on any part of the fabric. All 'Alugen' Suits are made from fabrics which pass Wet Flex test. Most of the fabrics available in market do not pass this critical test. As a user one should be careful about this. GENTEX's proprietary Dual Mirror® / Flexir® Aluminized Fabrics offers an exceptionally high level of abrasion resistance - the result of its unique, five-layer fabric structure. This proven system ensures that the suit remains highly reflective even after repeated use and proper care and cleaning.   The five layers consist of an outer skin of 1. Aluminum, 2. Protective film, 3. Second layer of Aluminum, 4. Heat-stable adhesive and 5. Base fabric. These individual layers are then combined to form a single fabric. The five layers consist of an outer skin of aluminum, a protective film, a second layer of aluminum, heat-stable adhesive and a base fabric. These individual layers are then combined to form a single fabric (As below).  

Modern Apparels developed Aluminised Fire Proximity Suit for Indian Navy in 1987 & since then the company is the sole supplier to the Indian Navy. • The company also developed Aluminised Fire Proximity Suit as per the specific requirement for Indian Army in 1998. • The Company has participated in the CBI Seminar "Expro 2000, organised by the Centre for the Promotion of Imports from Developing Countries, an agency of the Netherlands Ministry of Foreign Affairs. • Recently, the company developed Water Gel Blanket for the Directorate of Indegenisation (D.O.I.) cell of Indian Navy.The first & the only Asian Company to manufacture this product till date.

• Wear Type: Reflective
• Closure Type: Button
• Fabric: Cotton
• Wash Care: Machine wash
• Packaging Type: Packet

In any industry a fire fighter has to work under conditions of very high temperature especially in case of aircraft fires, chemical fires etc. We supply alluminised fire proximity suits which exactly suit all the requirements in the above circumstances. These alluminised fire suits are made up of kevelar fabric. These suits are also useful in petrochemical plants.

• Size: Large
• Material: Aluminum
• Pattern: Plain
• Closing Type: Zipper
• Gloves Size: 14 inches
• Layers: 2 -4 Layer
• Weight: 350 - 1600 GSM
• Fabric Quality: 430 g/sqm
• Zipper closer size: 7 to 9 inches
• Heat Resistant: 800-1000 degree C
• Product Type: Fire Suit
• Sleeve Type: Full sleeve
• Packaging type: Galvanized Trunk
• Stitching Type: Kevlar Thread
• Wear Type: Reflective
• Inner Layer: Thermal Barrier
• Middle Layer: Vapour Barrier
• Innermost Layer: Woolen, Flame Retardant Cotton

• Brand: Alugen
• Color: Silver
• Gender: Unisex
• Sleeve Type: Full Sleeves
• Heat Resistance: Yes
• Available Sizes: S, M, L, XL, XXL, XXXL, As per customer requirement

Fire Proximity Suit is made out of 16 oz imported aluminized glass fibre fabric with dual mirror having 90% reflection of heat as a outer layer and with woollen fabric lining. Additional layer (Vapour Barrier) is also used for higher temperature. Outer fabrics tested and approved by Defence Institute for Fire Research New Delhi & field tests performed by Defence-Indian Navy NBCD School, INS Shivaji. Lonavla Maharashtra    Application These Suits are used for rescue operations in an area of intense heat, fire, steam, hot liquid by fire fighters in industries like Petrochemical plants. Foundries, plant, steel, glass, ceramics & Defence.Complete Suit consists of the following:- Overall: An Overall is one piece suit or 2 pc. Jacket & trouser having Zipper & Stud fastner with or without Pouch on back to accommodate breathing apparatus. Stitching is done by ‘KEVLAR’ Threads. Hood:It houses a fibre glass helmet for firemen as per IS-2745. Two elastisized straps to cover well below the shoulders. Hood has the visor consisting of curved plain poly carbonate and tinted acrylic & outer layer of thin transparent mica. Gloves: 14” long five fingered type Gloves having stud fastener for better securing at wrist. Boots: Boots are made of upper layer of aluminised glass fibre fabric & inner lining of high quality leather, with heavy duty zipper covered with aluminised fabric flap with extra stud for double protection. Special Neoprene Rubber sole in non skid pattern for use in oil / chemical / grease area. Metal toe for extra air-room & protection. Application :These Suits are used for rescue operations in an area of intense heat, fire, steam, hot liquid by fire fighters in industries like Petrochemical plants. Foundries, plant, steel, glass, ceramics & Defence.

AramidKevlar non woven laminated with PTFE membrane for maximum breathability and hydrostatic head (waterproof) performance. (EN 343 protection against foul weather)Constructed using non-woven ARAMIDE KEVLAR fibers laminated with NomexViscose innermost ling fabric for maximum protection.

Fire Proximity Suit is made out of 16 oz imported aluminized glass fibre fabric with dual mirror having 90% reflection of heat as a outer layer and with woollen fabric lining. Additional layer (Vapour Barrier) is also used for higher temperature. Outer fabrics tested and approved by Defence Institute for Fire Research New Delhi & field tests performed by Defence-Indian Navy NBCD School, INS Shivaji. Lonavla Maharashtra

We are engaged in offering superior quality Boiler Suit to the customer. These Boiler Suits are designed as per clients' preferences and requirements by our team of highly experienced professionals. In addition to this, we make sure that the ordered Boiler Suits reach clients' end within the committed time frame via our wide distribution network.

Fire entry suit is specially designed for complete protection from fire. Fire entry suits are generally made up 8 layers of insulation In this case boots, soles and hoods are also completely insulated. We manufacture fire entry suits strictly adhering the standards of ISO 9001. Here fire fighter while performing his duty may come in contact with fires where temperature can be more than 2000 ° F. sometimes. Our fire fighting suits are manufactured taking into consideration all these aspects and we can confidently say that they are able to protect fully the user from heat up to 3000 ° F

• Size: L, M, S, XL, XXL
• Type: Boiler Suits
• Material: Non Woven, PVC
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm
• Application: Constructional Use
• Color: Black, Blue, Green, Grey, Orange, White, As Shown In Pictures
• Gender: Female, Male
• Feature: Comfortable, Heat Resistant, Skin Friendly
• Pattern: Plain
• Country of Origin: India
• Neck Type: Collar, Round
• Sleeve Type: Full Sleeve
• GSM: 180 to 290 GSM Fabric
• Waist: 96cm
• Wash Care: Handwash
• Features: Soft, Fadeless
• Packaging Size: 4 Pcs. Per Pack of Different colors

• Color: Orange
• Size: Medium
• Gender: Male
• Pattern: Plain
• Country of Origin: Made in India
• Brand Name: French Terrain
• Wear Type: Reflective
• Function: Flame Retardant, Protective Workwear

• Size: L, M, XL, XXL
• Material: PP
• Thickness: 1.5-2mm
• Application: Industrial
• Color: Multicolor
• Feature: Anti-Shrink, Heat Resistant, Waterproof
• Pattern: Plain
• Neck Type: Collar
• Sleeve Type: Full Sleeve

• Material: Nomex
• Size: Large
• Color: Blue
• Gender: Unisex
• Country of Origin: Made in India
• Brand: Milan Safety
• Usage/Application: Fire Safety
• Model Name/Number: FFS01
• Wear Type: Reflective
• Number Of Layers: 3 layers
• Sleeves Type: Full sleeves
• Wash Care: Machine wash
• I Deal In: New Only 
• Heat Resistance: Yes
• Product Type: Jackets & Coats

With valuable industry experience, we have emerged as one of the prominent manufacturers and exporters of Safety Boiler Suit. All these Industrial Boiler Suit are widely demanded in the industries of oil & gas industries. Specially designed for the safety of workers working in highly critical processing areas, these Safety Boiler Coverall can excellently sustain high temperature and other adverse conditions in the industry. Our clients can get this Safety Boiler Suit from us in different colors and sizes as per their requirements. Features

We offer high performance Aluminized Fire Proximity Suits that is widely applicable in intense heat, fire, steam and hot liquid. These Fire Proximity Suits are extensively used in the petrochemical plants, foundries, plant, steel, glass, ceramics and defence industry. The Fire Proximity Suit has been specially developed and field tested for rescue operations. The outer layer of these suits is made from 16 oz imported aluminized glass fibre fabric with dual mirror which has 90% reflection of heat.

industrial boiler suit, Boiler Suits, Patient Uniform, Nurse Uniform

• Material: Polyester
• Size: Small, Medium, Large
• Sleeve Type: Full Sleeves
• Product Type: Overalls
• Wash Care: Machine Wash