Heating Coils Dealers in Masjid Bunder, Mumbai

While it is not necessary to tell engineers what finned tubes are, or that their use is mandatory in cases of gas-liquid heat exchange where the film coefficient ratio is above 2, it is essential to tell the engineers that M.J.Patel's FINNED TUBES are backed by not only engineering excellence of manufacture, but also by our zealously guarded reputation for the finest quality of all our products. T-FINS Helical Straight strip wound on the tube are mechanically secured. The tubes are required grade of steel, the fins are aluminium for maximum tube-wall temperature of 121 deg C (250 deg F) and mild service conditions.L-FINS Helical strip bent to L-shape are mechanically secured to the tube with the outer surface of the tube totally enclosed with fins, for full fin contact and protection of tube from chemical action of the gas for maximum tube-wall temperature of 177 deg C (350 deg F) and moderate service conditions.G-FINS Helical straight strip wound into pre-cut grooves on the outer wall of the tube, fin and groove lips mechanically closed for maximum tube-wall temperature of 371 deg C (700 deg F) and extreme working conditions. STUDDED TUBES We have developed state of the art Technology for studded Pipes and Tubes of Carbon, Alloy and Stainless Steel Material having extremely low clear gaps between studs. These are used in Refinery Services and Fluidized Beds Boiler Coils.LONGTITUDINALLY FINNED TUBES We have indigenous developed automatic welding machines for giving low distortion Longitudinally welded Finned Tubes used in low capacity Boilers. MAJOR APPLICATIONS Process liquid cooling, Water cooling in chemical, petroleum, petrochemical and similar uses, Condensing, etc. Heating of air by steam in tubes. Air-conditioning and refrigeration industries, Metallurgical industries for cooling of quenching oil.

We are offering spiral finned tubes. While it is not necessary to tell engineers what finned tubes are, or that their use is mandatory in cases of gas-liquid heat exchange where the film coefficient ratio is above 2, it is essential to tell the engineers that m.j.patel's finned tubes are backed by not only engineering excellence of manufacture, but also by our zealously guarded reputation for the finest quality of all our products.

We manufacture Super heater coils in various grades of Alloy steel - T1, T9, T11, T22, T9 & T91 and in stain less steel tubes SS 304, SS310, SS316 and SS 347H with or without support & Header as per customer's drawing

• Voltage: 220/230/240V
• Leads thickness: 1000 mm Teflon
• Wattage tolerance: +2 % or +10%
• Features: Low profile construction allows easy access for multiple gate moulds,Long lead cold section beyond clamp prevents overheating of lead Connections,Stainless steel band available for screw operated clamping methods,Provides uniform heat source for entire ci

We attach tremendous value to our working relationship with our clientele comprising epc contractors, engineering consultants and various blue chip companies in sectors across the spectrum such as oil & gas, petrochemicals, power, fertilizers, cement, metals, textile, pharma chemicals, shipbuilding and other varied sectors.

• Type: Erw Air Heater Tubes, CORTEN STEEL
• Material: Carbon Steel, Erw Steel, Mild Steel, CORTEN STEEL
• Shape: Rectangular, Round, Square
• Certification: ISO 9001:2008 Certified
• Application: AIR HEATER TUBES
• Color: Black
• Dimension: 19.05 TO 114.30 MM

PUSHPAK one of the leading manufacturers for APH & IBR tubes.   as BS 6323, BS 3059, ASTM A 423,SA 214,   Application Indian British Japanese German American Air Heaters ( APH ) IS 3601 BS 3059 JIS G 3461 DIN 1717 ASTM A 214 Boilers IS 1914 BS 3059 JIS G 3461 - ASTM A 53   - - - - ASTM A 214 Heat Exchanger - BS 3606 JIS G 3461 DIN 17177 ASTM A 178,214  

We are a prominent Manufacturers, Suppliers, and Exporters of Integral Finned Tubes. These Integral Finned Tubes come with superior dimension accurateness, sturdy construction, and fine finish. Integral Finned Tubes can improve the thermal performance of a heat exchanger without the changing shell size, flow arrangement or the repositioning of piping. We offer Integral Finned Tubes in different specifications to meet divergent demands of the clients.Integral Finned Tubes are suitable to be used in such applications where extended surface is required, but lack of space or heat exchanger type dictates otherwise. The external surface of the Integral Finned Tubes is enhanced by the formation of ''low fins'' by direct extrusion from the material of the base tube. Highlights : Smooth finish Accurate dimensions Sturdy construction Corrosion resistance surface Availability : Available materials are stainless steel (304L, 316L, 321(H), 304H, 310 etc.), duplex, copper alloys, nickel alloys, hastelloy and titanium Size range / Dimensions : Tube size : 12,7mm, 15,88mm, 19,05mm and 25,4mm Fins per inch : 16, 19, 26, 28, 30, 32, 36, 40 and 43 fins/inch dependant on material Qualities : Non-destructive eddy current examinationAir under water testingHydrostatic testing (with fluorescent dye)Fin profile examination at 50x magnificationDimensional & ring gage checks In specifying finned tubes you should advise : Number of finned tubes requiredOutside diameter of tubeTube thickness or thickness required under root of finLength of finned tubeNumber of fins per inchUnfinned endsSkipped portions and dimensions from one endMaterial of tube In specifying U-tubes you should advise : Tube diameter, thickness and materialStraight leg lengthCentre line radius (or diameter) and number off per rowWhether post bend heat treatment is requiredWhether hydraulic testing is required

integrally finned tubes by low finning / integral fin tube: type low fin:integral low fin tube for use in situations where extended surface is required, but lack of space or heat exchanger type dictates otherwise.available materials are stainless steel (304l, 316l, 321(h), 304h, 310, …), duplex, copper alloys, nickel alloys, hastelloy and titaniumintegral low fin tube has the advantage that it can improve the thermal performance of a heat exchanger without the necessity for changing shell size, flow arrangement or the repositioning of piping. finned heat exchanger bundle the external surface of the tube is increased by the formation of ''low fins'' by direct extrusion from the material of the base tube.size range / dimensions:- tube size: 12,7mm, 15,88mm, 19,05mm and 25,4mm- fins per inch: 16, 19, 26, 28, 30, 32, 36, 40 and 43 fins/inch dependant on material quality test capabilities :- non-destructive eddy current examination- air under water testing- hydrostatic testing (with fluorescent dye)- fin profile examination at 50x magnification            - dimensional & ring gage checks . .

• Application: Induction Heater
• Material: Titanium
• Brand Name: MMSC
• Shape: Round
• Unit Length: 18m

Girish-heat’ brand Coil heaters are designed and manufactured with advanced concept of thermal engineering which has a construction similar to high watt density cartridge heaters. These heaters are also known as high performance tubular heaters or cable heaters. The basic construction of these heaters consist of compacted MgO, high temperature resistance wire and Chrome Nickel Steel tube. These heaters can be constructed with or without built in thermocouples Uses :- Packaging Industry Marking & Sealing MachineryHot Runner BushingsMedical & Laboratory ApparatusShoe Making IndustryDie and platents   MAIN FEATURES :   1. Standard sizes available with various cross section 2. Various Watt Density option available 3. Designed for even heat profile 4. Precision fit on Hot Runner Nozzles 5. Highly Non-corrosive

Economiser Coils, FABRICATION, super heaters, high pressure seamless pipes

• lengths: BS3601, BS3059, BS6323, ASTM A178, A213,

Available in customized as well as fixed lengths as per standards like BS3601, BS3059, BS6323, ASTM A178, A213, A333, A334, IS3601, IS3074, IS1914, IS2416, IS11714. Customized tubes are also available with IBR Non- IBR certifications.

steam coil, aluminium coated coils, Mica Band Heaters, Sealed Mica Heater

• Country of Origin: India
• Certification: ISO Certified
• Application: Industrial

PRE HEATER TUBES

Economisers Coils, Boiler Tube Bend, Studded Tubes, Superheaters Coils

We provide air heater tubes. Our ERW air heater tubes are provided from 1½" to 4" to BS 1775BS 6323 and are used in sugar mills and chemical plants.

ERW Air Heater Tubes, Carbon Steel Pipe, Alloy Steel Pipe, ERW Tubes

heater tube, diesel glow plugs, heater parts, Heater Plate