Heating Components Dealers in Goregaon, Mumbai

Ceramic Heater Plate are so called because they have a number of ceramic plates attached to some coils of metal that heat up in the same way as a coil heater, but the plates absorb the heat and release it into the air. They are quicker than coil heaters and they take less time to cool down once they are switched off.

• Featurers: Precise speed control from 5 to 50 RPM with soft start facility, Forced air heating system with programmable temperature range from 30 degree to 50 degree C , 24 x 7 continuous operation .
• Input Voltage: standardization
• Compatible Power: standardization

• Type: Flexible
• Certification: CE Certified
• Color: White
• Voltage: 220 V
• Power: 1-3Hp
• Driven Type: Electric

Heater plate is equipped with uniquely designed & heavy duty heaters with PID temperature controllers with 3-phase solid state relays mounted in easily replaceable PC boards. USING THE HEATER PLATE The Heater plate of Hot Foil Attachment is manufactured from a specially developed graded casting and machined upto a highest accuracy. It has tapped (M6) holes over it's surface. The thickness of the heater plate is 17.5 mm. So it is possible to use a stamping dye of the image height 6.5 mm (max) on the heater plate. If one desires to use a thin dye (image height of 1.5 mm approximately), it is required to paste the same thin dye on an aluminium plate of 4 to 5 mm thickness. Some strong rubber solution or any other adhesive. A full size aluminium plate may also be permanently fixed on the heater plate. HOLDING & MOVING THE DYE To hold and move the dye for getting proper registration, different clamps are provided. To use calmp no.1, which gives much firm hold, it is essential to reduce the dye thickness at the borders by around 2.5 mm.  Clamp no.2 gives a lesser firm hold on the dye but it is more easy to use. It does not require any reworking of the dye. Movement of the dye is quite easy and a very minute adjustment is also possible with these clamps. PRECAUTIONS The operator has to be very cautious while fixing the dye on the heater plate. While mounting the clamps, never use invalid screws of longer length. This will damage the heater element placed inside the heater plate. It may also lead to a serious short circuit and the unit may get damaged. Never leave any screws loose. Use only the holes provided by the manufacturers. Creating additional holes for covering more printable area is risky. It may lead to serious accidents and damage to the machine. USEFUL TIPS A 100% firm contact between the surface of the heater plate and bottom of the stamping dye (or the aluminium plate beneath it) is extremely essential. Any gap may result to non-conduction of the heat. Selection of proper foil, make-ready material and make-ready technique and properly mounted dye of the best quality are the proven keys of getting good stamping results. Excessive temperature and pressure would never help to produce better results. One has to develop his own make-ready methods and choice of material for achieving more and more improvement.

Versati Ⅱ+(Monobloc Type ) Energy saving; high leaving water temperature; smart dual-temperature detection control; heat pump technology   Energy saving It adopts solar energy to heat up water, which is more energy saving.   High leaving water temperature Gree unique 2-stage enthalpy-adding compressor is adopted, ensuring the leaving water temperature as high as 60℃.   Smart dual-temperature detection control technology ON and OFF control is realized by upper and lower temperature sensors, which can renew water temperature in real time, thus ensuring the perfect timing of startup. Hot water yielding rate and hot water use rate are both improved.   Heat pump technology Versati II+ (Monobloc Type) is designed based on heat pump technology. It extracts heat from outside air and increases temperature for domestic heating purpose. It can greatly reduce energy consumption and CO2 emission.

• Type: Industrial Water Heating Element
• Material: Stainless Steel
• Application: Analysis Instruments, Industry
• Color: Brown, Light Grey
• Voltage: 110V, 220V
• Condition: New
• Driven Type: Electric
• Feature: Durable, Fast Heating, Perfect Body Structure
• Warranty: 1year

We are the main supplier of this product.

industrial heating equipments, Laboratory Equipments, Digital Incubator

  We are one of the leading  Electric Thermic Fluid Heater Manufacturer in India. Our Electric Thermic Fluid Heaters are fully automatic in mode and thus very easy to operate and control. They are offered in both vertical as well as horizontal coil types. Our Thermic fluid heaters are highly efficient because the elements are totally immersed in thermal fluid and the jacket is fully insulated with high density insulation. The ETFH is designed and manufactured using high quality heating elements, precise dimensions in a state-of-the-art manufacturing facility. Our quality control guarantees highest safety and long life span. The main difference between this heater and a gas or steam boiler is the energy source which used to heat the thermal fluid upto the required temperature. While a gas, oil or diesel boiler has a burner which sprays or injects the fuel, in case of electric thermal fluid heaters, there is no flame as the heat is provided by electrical resistors.  Use of low Watt density flanged electric heaters maintain low heat flux densities. The surface area provided is generously sized to keep thermic fluid film temperatures low, which protects the thermic fluid from carbonizing.   Our electric thermal fluid heaters are supplied as a compact unit on a platform containing all equipment components like Heater unit , thermic circulating pump, various isolating valves, its interconnecting piping etc including the expansion tank. These heaters are suitable for upto a maximum temperature of 300 deg centigrade.They are available from a range 6 KW to 120 KW.

We are offering foil stamping heater plate. Foil stamping heater plate made of imported aluminium specially graded to ensure even surface, equal, and rapid heat distribution and adequate compressive strength. Heater plates are equipped with uniquely designed heavy duty heaters with pid temperature controllers coupled with 3 phase solid state relays mounted in easily replaceable pc boards.

Lab Care Tray DryerTray Oven is used for the best drying results in conventional process. Designed in compliance with the Standard quality Producer, the dryer has a Trippl walled cabinet both side and Back ,Botoom and Door is Double Walled . High Quality Miner wool Insulation is filled to avoid heat Loss .Working Chamber and Outer body is made by choice of customer , Trays are also available in Mild Steel Alumuminum, and Stainless Steel , Movable Trolley can be also supplied with equipments on demand of customer

Thermic Fluid Heater, Drum Flakers, Oil / Gas Industrial Steam Boilers

mica insulated heaters, Cartridge Heaters, cast heater, Cast In Heaters

Heating Equipment, Ibr Steam Boilers, Pressure Vessels

heating equipments, Industrial Heating Elements, Ceramic Heaters

heating equipments, Boilers

Heating Tapes / Cords, Glass Water Distillation Unit

steam radiators, Thermic Fluid Radiator .

Thermic Fluid Heaters, Air Heaters, Boilers, boilers accessories

Drying System, Zero liquid discharge, Agitated Thin Film Dryer, spray drying