Heating Components Dealers in Naigaon East, Mumbai

This design gives highest efficiency ever. The Thermic fluid heater is of VERTICAL construction with Two concentric large diameter helical coil & shell assembly, placed directly on top of the combustion furnace. This ensures that the intense luminous heat of the flame is fully utilized. This is the first, Radiative section comprising of the first 3 passes of hot flue gases.   These gases from radiant coil are then made to pass through a second, convective heat exchanger. This is again made of twin concentric helical coils, placed inside a sturdy M.S. shell having two more distinct passes of hot gases, making the total passes of Flue gases inside the TFH to FIVE. Thus maximum amount of heat is extracted from the flue gases. The gases are then made to pass through the Air prehater & Mechanical dust collector, on way to the chimney through I.D.Fan. A generously designed refractory lined external furnace is provided to ensure high furnace volume and grate area and can ensure rated output on low-grade coal and can easily burn most other fuels such as Lignite, Paddy husk, Fire wood, Bagasse, etc, without any modifications.   The Safety controls and instrumentations provided ensure completely safe operation and provide Audio Visual Alarm and cuts off the combustion in case of abnormal operating Conditions.

TECHNICAL SPECIFICATION i - Type – Vertical/Horizontal, 3 pass, Coil Type Thermic Fluid Heater ii - Capacity – 50000 kcal/hr to 2500000 kcal/hr and above iii - Temperature - Up to 300°C and above iv - Fuel - Gas / Diesel/Heavy Oil/ Dual Fuel v - Thermal Efficiency - 88% + 1% based on N.C.V. of Fuels vi - Heat Recovery Unit – Economiser (Optional) vi - Air Preheater - In-built     OPERATION i - Fully automatic operation with BURNER ON-OFF modulation for units up to 40 Lac kcal/hr and HIGH-LOW ON-OFF modulation for higher capacity units keeping FUEL CONSUMPTION in proportion with heat demand in the plant ii - The Burner is pressure atomizing type and is centrally located at the top of the unit iii - Burner is self igniting and maintains CLEAN and SMOKELESS COMBUSTION all throughout the operation iv - Preheated combustion Air gives highest Combustion efficiency maintaining high CO2 % and Low Smoke Index v - Hot Oil circulation pump is of centrifugal type maintaining the circulation of Hot Thermic Fluid through heating coil vi - A Digital Temperature Controller senses the heat demand in the plant and controls the Burner ON-OFF/HIGH-LOW modulation maintaining minimum fuel consumption vii - In case of any abnormal operating condition the SAFETIES provided stop the unit and put the same to SAFETY LOCKOUT CONDITION by giving AUDIBLE ALARM and VISUAL INDICATION     SAFETY FEATURES i - Flame failure device ii - Thermic Fluid low flow tripping iii - Overriding temperature tripping iv - Blow down valve v - Single phasing prevention cum over load for control circuit vi - Miniature Circuit Breaker for control circuit vii - Thermic Fluid level switch on expansion tank (optional) viii - High stack temperature Annunciation/Alarm (optional) ix - Fail Safe Instrumentation x - Control circuit logic ensures Heater going to lock out safety in case of any abnormality in operating condition as well as monitoring instrument failure

Kerone infrared modules are the ideal solution for the application of infrared heat technology. They save the user design costs and time and are substantially less expensive than the complete infrared systems. They are complete and ready for the operation. This provides advantages for both the, user while installing in to the existing systems and for the planning project engineers.

Kerone infrared modules are the ideal solution for the application of infrared heat technology. They save the user design costs and time and are substantially less expensive than the complete infrared systems. They are complete and ready for the operation. This provides advantages for both the, user while installing in to the existing systems and for the planning/ project engineers. Infrared modules can be individually regulated, controlled and ventilated. Because of its modular construction it is possible to make the heating panels of practically any size with heaters length up to 40 Applications Curing of paint Powder coating Lacquers Drying Printing ink Drying glaze on Ceramic Tiles Drying Gumming Sheets Drying Adhesives Tapes Latex paper Textile Car body works

• Warranty: 1 yr
• Condition: New
• Power: 5 kw on wards  
• Control Mode: digital
• Cop: 4
• Water Connection : 3/4(inch)
• Water Temp. : 60(deg. Celsius)
• Refrigerant: R407/410
• Output Power (kW): 3 kw onwards
• Compressor Type: Rotary/scroll
• Energy Saving: Yes
• Capacity (kW): 3 kw onwards
• Power Supply: 215/430  (V)
• Frequency : 50 (Hz)
• Energy Type: Non Renewable 
• Power Source: Electric
• Hot Water Production Capacity: From 100 kg/hr onwards 
• Heater Material: Air
• Voltage: 220 v/415 v

• Brand Name: FLAME PROOF HEATERS

Magma manufacture a full range of electric flameproof heaters. Magma electric flameproof heaters are in accordance with the latest requirements or manufactured to the latest iecex specifications. Process heaters can be certified for use in zone 1 and zone 2 or class i, division 1 or division 2 hazardous areas. Thyristor control systems and flameproof control systems are also designed and manufactured by magma to control our range electric process heaters. We will be pleased to advise on the most suitable control system for your heating application. Magma can offer a full range of flameproof heaters, electric tank immersion heaters, process flow heaters and electric heating skids for a variety of applications. Typical electric process heating applications include fuel gas heaters, fuel oil heaters glycol reboilers etc.

• Voltage: 230V
• Brand Name: Flexo-Therm
• Power(Watts): 22.5 Watt

• Brand Name: Omkar
• Operating Voltage: 240 To 480 Volts,50-60Hz
• Wattage: 50-1000W
• Material: Stainless Steel
• Heating element: Nickel Chrome wire / FeCr wire
• Working Temperature: Maximum 300 Degree C
• Protection: IP55 Cast Terminal Box
• Compatible With: All types of ESP