Heating Furnace Dealers in Marol, Mumbai

APPLICATION : This is designed for galvanizing of Cable trays, MS structural, Poles and other miscellaneous items by Hot dipping in the zinc molten bath at 450 to 455 deg C. The general arrangement of galvanizing bath furnace shall be as illustrated in our enclosed drawing.   DESCRIPTION        The galvanized bath furnace offered is a Diesel / Gas fired with Steel kettle of special         material used for melting of zinc and designed for continuous operation.          The galvanizing bath furnace shall have a Kettle of size of 12,000 mm long x 1,500 mm         width x 2,000 mm Deep.The Kettle is installed inside the pit suitably thereby         bringing the operating level at about 750 mm from floor level.   The furnace will be of indirect heating type with suitable chamber, burners   and Blowers. Inspection pockets provided for inspecting the furnace chamber and kettle wall. Zinc drain pocket for drainage of molten zinc in event of kettle puncture. Burners will be suitable for Diesel or Gas.   For controlling the temperature of molten bath we include an automatic temperature control system comprising of a digital temperature controller, thermocouple sensor and solenoid oil valves.   The burners will automatically go fast and slow during the process whenever temp goes down, it will go fast and when temp goes high, it will slow as per the set off temperature. Due to this the consumption of fuel will be minimized.  The Furnace consist of a refractory brick lined work using high quality alumina bricks. The galvanizing bath furnace is arranged for firing with 4 Nos. reputed make oil/gas fired  burners with supporting Blowers, Control Valves etc.   Electrical Control panel is supplied incorporating digital temperature controller and various electrical switchgear and is completely wired from inside and ready for connection to the mains.   The galvanizing bath is capable of giving an out put of 50 – 60 tons/day. However the           actual out put would vary considerably with the size, shape and weight of the steel structure and parts to be galvanized.      

The furnace for continuous casting of metals and precious metal alloys is designed to provide the user with a defined shape product strips (framework, rectangle, round, tube, tape, more ...) to be sent to subsequent mechanical processing of drawing, rolling or other. The continuous casting furnace is mainly composed of two overlapping zones, a melting zone of the metals and a controlled solidification of the same area in a defined shape. MELTING ZONE The melting of metals takes place in a graphite crucible by electromagnetic induction. The variable magnetic field, generated by the frequency converter installed on the machine, determines the formation of eddy currents in the graphite crucible and in the metal itself. The resulting Joule heating effect causes a temperature rise up to pass the metal or metal alloy melting point. AREA OF CONTROLLED SOLIDIFICATION At the bottom of the crucible is combined with a spinneret of the same material (graphite) that has a cavity of the desired shape by the customer (framework, rectangle, round, tube, tape, more ...). From this chain will exit the metal in the form chosen. The chain, removable and interchangeable, constitutes the real of the crucible and once melted the bottom, the liquid metal begins to penetrate the shape of the chain assuming the shape of the cavity. Advancement of metallic form when exiting the die provides a towing system based on motorized knurled rollers. • All functions are controlled by microprocessor • Digital power adjustment, speed 'entrainment, temperature of the crucible and of the die • High efficiency thanks to the medium frequency induction converter • Self-diagnostics with breakdown messages • Control of the temperature of the crucible and the chain by means of independent thermocouples • prevention system of the oxidation of metal

• Type Of Model: Laboratory
• Power Source: Electric
• Air Pressure Requirement: 0-2kg(max)
• Dimension: 460 x 480 x 280mm
• Net weight: 30kg
• Power Supply: 1phi,230 V AC,1kW

• Type: Continuous Furnace
• Material: metal
• Color: Light Yellow
• Condition: New
• Automation Grade: Automatic
• Application: industrial
• Driven Type: Electric

Our company is an established Manufacturer, Supplier and Exporter of Continuous Furnace from Mumbai, Maharashtra. To address the divisive needs of our customers, we provide a range of Continuous Furnace with varied specifications for use in different industries. Clients in various countries prefer our product because of its easy operation and great temperature control. Owning to our efficient logistic structure, we make sure that our customers receive their orders of Continuous Furnace in a timely basis. Details : Multi- zones for heating & cooling. Excellent Temperature control for each zone Trouble free & easy operation Mesh belt type, Slat type or Chain-strap type Conveyor belts are available. Momentum of conveyor can be changed through VFD.

Hardening Furnaces, rotary carburising furnace, Tempering Machine

Blast Furnace Slag is a by-product from the manufacturing of steel in a blast furnace. Initially in its molten form, it is diverted to a granulator where it is quenched with water and rapidly cooled to form glassy, non-metallic granules which are silicates and aluminosilicates of calcium. These granules are dried to produce Granulated Blast Furnace Slag (GBFS).Due to stringent quality control in the steel production process, the chemical composition of its by-product GBFS is highly stable. Regular checks are carried out on the granulate to monitor the amount of glass produced as a control on the effectiveness of the quenching process. GBFS is light in color, around 3mm down to dust in size and has a relatively high moisture content. The material is allowed to drain by stocking in heaps for sufficient time.GBFS is ground to a suitable fineness to produce Ground Granulated Blast Furnace Slag (GGBFS), which is used as a cementitious material in concrete to enhance long-term performance and durability characteristics while reducing life-cycle and maintenance costs. With the poor quality, contamination (silt, clay, etc.) and depletion of natural sand, as well as significant negative environmental impact of crushed sand (rockgranite), GBFS has found its way as an effective replacement of natural sand crushed sand in concrete as a fine aggregate. Advantages include reduction of cement content, higher reactive silica and negligible silt content, improved strength, reduced permeability and chemical attacks, increased durability, lower shrinkage cracks, better cohesiveness and workability, improved bonding and smoother finish.

We offer Burnout furnace. Specifications:- High- temp insulating brick used. F1+4 brick with Sodium Silicate. Outer body totally made from S.S. 304 quality. Optical fibre 4 mm thick wires are used. 16 SWG canthal A+ wire used for heating element. Flask capacity: Available in different nos 4,6 ,9,12,16 or more than that Wattage 3KWx2=6KW. Operating voltage. 230v single phase 50Hz All materials carry full warranty except heating element. S.S.or M.S.body are provided with heavy insulation to prevent any heat loss. Microprocessor programmer with delay starting mode. 18 steps for high & low temp. With hold time facility and memory back up. Heating element are secured in grooves inside chamber & can easily be replaced.

Moviroll systems allow the operator to effortlessly manoeuvre both large and small cylindrical loads on a flat surface and then place them on the roll stand shuttle cart. Compact, heavy-duty, fast and with low or no maintenance requirements, the new Moviroll roll pushers allow the movement of the load in a continuous and regular way and are ideal for handling corrugated, paper, tissue and cable rolls in a simple and safe manner. All Moviroll models are designed and made in Italy.

The technology of bright annealing is applied for stainless strip steel so that it can it can keep bright surface after cold rolling. It is another treatment method for cold rolled stainless strip just like annealing-pickling. We can provide annealing line for stainless steel, continuous annealing line and hood-type annealing line. Different annealing furnaces can be designed based on different energy sources according to your requirement, and different thermal treatment is applied on different processing material.

    APPLICATIONS Hardening *Glass firing * Glass Fusing * Glas Decoration *Glass Tempering *Glass Slumping * Glass Thermoforming FEATURESFast & Efficient Production with Low Production Cost *Low Initial Investments Compared to Imported Kilns  Lehrs * Rely on 100% Indian Field Proven Tech. & Service Back-Up 

• Size: 3000 mm to 4500 mm
• Width: 1500 mm to 2500 mm
• Capacity: 5 MT to 50 MT

These type of furnaces are mostly utilized for annealing of steel coils. Our offered supreme quality furnaces are mostly utilized in high volume production due to well configuration and insulation of these required in heating system. Incrab Furnaces provides wide range of bell annealing furnaces to all over the globe.

  Heat Treatment Furnaces for Postweld Heat Treatment of Large Pressure vessels/Normalising or Solution Annealing of Dish Ends by Fuel Fired Oil/Gas Burner Systems or Electric Heated

 Supply 230VAC 1ph,  - Wattage 6kw ( Increase based on flask capacity - High temp insulating bricks are used. F1+4 bricks sodium silicate. - Outer body fully made MS. - Optical fibre 4mm thick wire are used. - 16SWG canthal A+ wire used for heating element. Wattage 3kw X 2 = 6kw. De-waxing system inbuilt. Microprocessor programmer with delay starting mode is provided Heating elements are secured in grooves inside chamber and they can easily be replaced when required. Automatically power off, when door opened  

Tenova is a leading company in the design and supply of high-capacity electric furnaces (ac, dc), submerged-arc smelting furnaces and complete smelting plants for the production of ferroalloys, base metals, slag cleaning and alloy refining. We are industry specialists in solid liquid separation and mineral processing applications for the minerals, chemical and industrial markets offering flotation, sedimentation, filtration, screening and gravity separation systems. With a long and successful history in the ferroalloy industry Tenova also designs and supplies equipment for material handling and pre-treatment, alloy conversion and refining, granulation of metal, matte and slag, furnace off-gas fume collection and treatment, treatment of hazardous dusts and wastes.

Burnout furnace, Dust Collector, gold melter, jewelery making machine

Backed by experienced and expert team we are offering range of industrial heat treatment furnace.

Burnout furnace, Abrasives, Magnetic Polisher, Micro Motor, Microscope

Heating Furnace

Heating Furnace, Induction Melting Furnace, Welding Equipment

atmosphere furnaces, vacuum furnaces