Heatless Air Dryer Dealers in Mumbai

How does it workRegenerative desiccant dryers normally are of twin tower construction. One tower dries theairtrom the compressor while the desiccant in the othertower is being regenerated afterthepressure in the tower has been reduced to atmospheric pressure. Regeneration can beaccomplished using a time cycle or on demand by measuring the temperature or humidity inthe desiccant towers or by measuring the dew point ofthe air leaving the on-line tower.In the heatless regenerative desiccanttype, no internal or external heaters are used. Purgeair requirement can range up to 18% otthe total air-flow. The typical regenerative desiccantdryer at 1000 psig has a pressure dew point rating of-40°F but dew points down to -100F can be obtained. Advantages of Regenerative Desiccant Type Dryers include : Very tow dew points can be achieved without potentiai freeze-up. Moderate cost of operation forthe dew points achieved. Low maintenance costs. Heatless type can be designed to operate pneumaticallv for remote, mobile or hazardous locations.

The theory behind operation of Heatless Dryers, is very simple. Chemicais which have the capacity to adsorb moisture on its surface. These adsorbents are used to dry the air. The adsorber are packed into two columns. The Cornpressed air is passed through this Column of packed adsorbent dessjcant. It is obvious that after a certain period or drying (i.e. few hours few minutes) the dessicant looses its capacjty to adsorb more moisture and hence is not capable of drying any more air, in its present Condition. The drying Capacity of the dessicant is restored by the process of regeneration.

Product range : 10 to 1000 cfm Due point -40°C Low maintenance cost

Suitable for extensive industrial usage, our Heatless Dryers are of unmatched standards. We fabricate them using the latest CAD/ CAM technologies. Therefore, our entire range is structurally reliable, dimensionally accurate, excellently finished and durable. We provide Heatless Dryer in various designs and sizes to meet varied requirements of buyers. In addition, we offer customized solutions. Buyers can get Heatless Dryer from us anytime and expect on time delivery of consignments.

Silver Line Series Gold line Heatless dryer

Compact, light weight and durable are some of the attributes of our Heatless Air Dryers. We are an established Manufacturer of Heatless Air Dryers from Maharashtra. The Heatless Air Dryers have a capacity of 5 CFM to 100 CFM and trouble free valve design. Simple and easy to install, our Heatless Air Dryers can be wall mounted. Low power consumption, automatic and maintenance free operation make our Air Dryers the preferred choice among buyers.

• Drying Capacity: 450-1130 cfm
• Dryer Technology: Dessicant
• Maximum Pressure: 12.5 kg/cm2(g)
• Material: Stainless Stell
• Weight: 850-1575 Kgs
• Country of Origin: Made in India
• Flow Volume: 480 cfm
• Purge Loss: 12 %
• Cycle Time: 10 Minutes
• Brand: Trident
• Air Inlet Temperature: 45 Degree Centigrade
• End Connection: 2" - 3" NB
• Length X Width X Height Mm In: 850 x 1320 x 1750 (Min)
• Model Name/Number: DP V2 Series
• I Deal In: New Only
• Installation/After Sales Service Available: Yes
• Operating Pressure: 7 kg/cm2(g)
• Pre-Filter Rating: 5 Micron
• After -Filter Rating: 1 Micron

PNEUM SYSTEMS INC, has developed Heatless Air Dryer which is a chemical desiccant using dryer, working on adsorption principle. The system consists of twin towers filled with desiccant of appropriate quality and quantity. Wet compressed air after being filtered by the prefilter and coalescing oil filter enters the distribution valve. An electrically operated valve with built in passages, which directs the air to one tower. The air is then passed through the tower and comes out in dry condition. The air is then passed through after filter to remove any carry over dust, via non-return valve. There is a by-pass arrangement with an orifice, to allow a fraction of dry compressed air to expand and pass through the other tower, here by regenerating it and making it ready for adsorption Cycle. The Regenerating air is passed out to the Atmosphere via muffler. At a preset time, the sequence control timer actuates the Distributor valve to reverse the tower function . For lower capacities, the distribution valve and control valve are integral units, however for higher capacity these control elements comprise of discrete control valves and orifices. Our Heatless air dryers are compact, economical, pre assembled, fully automatic, “Fit and Forget” type of units with very little power consumption of around 100 watts. For detailed offer, please indicate capacity, pressure, and source of compressed air.   Features of our Heatless air dryers :1. Outlet air dew point - 40°C is achieved.2. Controlled effluent gas temperature3. Since the drier size depends only on flow and pressure, inlet temp. of 10ºC to 50ºC can be handled by same unit.4. Very low spare parts inventory.5. Desiccant beds can remove oil in its vapour form.

PNEUM SYSTEMS INC, has developed Heatless Air Dryer which is a chemical desiccant using dryer, working on adsorption principle. The system consists of twin towers filled with desiccant of appropriate quality and quantity. Wet compressed air after being filtered by the prefilter and coalescing oil filter enters the distribution valve. An electrically operated valve with built in passages, which directs the air to one tower. The air is then passed through the tower and comes out in dry condition. The air is then passed through after filter to remove any carry over dust, via non-return valve. There is a by-pass arrangement with an orifice, to allow a fraction of dry compressed air to expand and pass through the other tower, here by regenerating it and making it ready for adsorption Cycle. The Regenerating air is passed out to the Atmosphere via muffler. At a preset time, the sequence control timer actuates the Distributor valve to reverse the tower function . For lower capacities, the distribution valve and control valve are integral units, however for higher capacity these control elements comprise of discrete control valves and orifices. Our Heatless air dryers are compact, economical, pre assembled, fully automatic, “Fit and Forget” type of units with very little power consumption of around 100 watts. For detailed offer, please indicate capacity, pressure, and source of compressed air.

Operation on ADSORPTION principle: Hence prevent entrainment of moisture in the pipe line however long it may be. The most compact skid mounted unit supplied in ready for use state by connecting compressed air at inlet and outlet. The stationary working system requires negligible maintenance. Assured atmospheric dew point equal to -40 deg C or -70 deg C is required. Ideal purging as per desiccant manufacturers instruction for regeneration. Lesser pressure drop in total unit. Modified purging silencer causes less noise. Designed for Indian atmospheric conditions. Easy for installation and commissioning

Twin Tower Heatless Regenerating Type 'Vaporid' Air Dryers of WabtecUSA design are manufactured and supplied for continuous drying of incoming air for Electric and Diesel Loco Brake System. These dryers are very compact in design having the inbuilt after filter. These are light in weight, easy to install and it requires minimum down time as replacement of desiccant bags can be made in position. The potted Electronic control module ensures reliable operation of the dryer even in the adverse environment.

These dryers are used for instrumentation and process applications as well. Some applications are , CNC machines , CMM machines , Spray painting , Nitrogen generators , laboratory air & gas applications , powder coating, etc…. Main Features are Dew point achieved - 40˚C. compact and can be mounted on wall. Low power consumption. Light weight Aluminum construction, no rusting. Specially graded desiccants for optimum performance. Equipped with pre filter & internal post filter. Quality as per ISO 8573.1 class 3. Range from 5 CFM to 100 CFM.

Available in:- Silver Line Series Gold line Heatless dryer

Annair Heatless air dryers are used for instrumentation and process applications as well. Some applications are, CNC machines, CMM machines, Spray painting, Nitrogen generators, laboratory air & gas applications, powder coating, etc.

Heatless Air Dryers, Air Dryer, psa nitrogen plants, oxygen plants

Heatless Air Dryer, dental compressors, Air Dryer for Industrial Process

Heatless Adsorption Dryers, Adsorption Air Dryer, Industrial Dehumidifiers

Heatless Air Dryer, Nitrogen Plant, Oxygen Plant, ammonia crackers