Heavy Duty Drill Dealers in Andheri, Mumbai

• Certification: NA
• Voltage: 440/380V
• Weight: NA
• Rated Power: 1/2 HP
• Supply Ability: 10 Piece/Pieces per Month
• Port: NHAVA SHEVA
• CNC or Not: Normal
• Place of Origin: Maharashtra, India
• Dimension(L*W*H): NA
• Packaging Details: EACH PIECE IS PACKED IN POLY BAG AND WOODEN CASE

We are offering drilling machines. Pillar drilling machine model pdm-13-b is having drilling capacity of 13 mm in steel. The few of the specifications are as under: spindle travel 75 mm, range of spindle speed 4nos,600 to 3000 rpm. Distance pindle center to column front 155mm, distance spine nose to table 560mm table size 216x216mmpower of main motor 0. 5 h p. Few of the features are as under: seamless steel pipe column hard chrome plated, alloy steel toughened &precision ground components i. E. Spindle ,drive shaft, hand fed shaft etc etc, drill head ram bore is precision bored &ram is precision ground for minimum clearance, brass wedge type clamps for drill head, arm & table.

UN-INTERRUPTED POWER SUPPLY (UPS) 5 KVA Numeric Administration 2 BENCH DRILLING BDMGT-171286 1 HP Dia 12" Eifco Machine Tools, Assembly Area 3 PNEUMATIC RE-TAPPING MACHINE M10 700 x 1500 rpm Pneumatic Tools Mfg.Co. Assembly Area 4 PNEUMATIC RE-TAPPING MACHINE SL.NO.06012 upto M8 Pneumatic Tools Mfg.Co. Assembly Area 5 UN-INTERRUPTED POWER SUPPLY (UPS) 5KVA Consul Connsolidated Assembly Area 6 NAME PLATE MARKING MACHINE CN 101 dp Technifor Gravotech Engg Pvt Ltd Assembly Area 7 UN-INTERRUPTED POWER SUPPLY (UPS) 5KVA Numeric Design 8 UN-INTERRUPTED POWER SUPPLY (UPS) 5KVA Numeric EDP 9 PNEUMATIC HAND DRILLING MC 6MM IEC Air Tools Electronics 10 PNEUMATIC HAND DRILLING MC 6MM IEC Air Tools LPG 11 UN-INTERRUPTED POWER SUPPLY (UPS) 5 KVA Numeric Machine shop 12 HYDRAULIC POWER PACK 50 LTS, 50 BAR Work Study Hydraulics (P) Ltd Machine shop 13 SHIMOGA CENTRE LATHE S884 V5460 3 HP Gap Bed Dist.200mm,GB Ht. 400mm, Centre Ht.210mm,CentreDist.900mm Mysore Kirloskar Ltd Machine shop 14 BOMBAY CENTRE LATHE 9612BY2091 15 HP Gap Bed Dist.225mm,

• Power Consumption: 700 Watts
• Voltage: 240 V
• Used: In Office, Home

It is a process for drilling oil holes in a crankshaft. The process includes the steps of placing the crankshaft in a horizontal or vertical position as per machinery in a crankshaft holding unit and maintaining the crankshaft in a single position through the drilling process. The holding unit is then rotated on a vertical axis until the crankshaft faces the drilling unit & the holes are drilled.

We are offering drilling and tapping cum drilling machines. Designed and built with an expertise of more than five decades in precision machine-tools. sturdy streamlined construction. high grade alloy steel, carburised, case hardened and precision ground to close tolerances for precision components viz; main spindles, shafts, gears etc. close-grained cast iron duly stress relieved with appropriate wall sections for head stocks, work tables and bases. columns made out of seamless steel tube ground and hard chrome surfaced. wide range of spindle speeds and feeds to facilitate drilling, tapping and boring requirements on varied materials. main spindles and pulleys are dynamically balanced and mounted on anti-friction bearings to ensure sustained accuracy. the electrical reversing mechanism provided for both hand and automatic spindle reversal for tapping applications.

The bench drill is used to draw out samples of precious metals to be assayed. It is a high precision bench drill mounted on oversized ball bearings. The pulley bush and the drill chuck spindle are made out of rectified iron. These characteristics ensure a long life.

We are offering the excellent quality Radial Drilling Machine for the customers all across the globe. Our Radial Drilling Machine is in accordance with high-quality standards, thus flawless performance and durability can be expected from these. Radial Drilling Machine, offered by us, has sturdy construction, and therefore can easily sustain through extreme conditions. We offer different types of Drilling machines i.e. Bench Type, Pillar Type, Universal Type, Radial Drill, Gang Drill, Multi Spindle Drill of different capacities. Details : Make : BlohmModel : Simplex 7Location : Navi MumbaiStock : STK0001561Origin : England Technical Specifications : Table Size : 700mm x 300mm

• Weight (Kg): 13
• Overall Length (mm): 495
• Shank (mm): 22x82
•  :  
• Bore (mm): 62
• Stroke (mm): 37
• Frequency (bpm): 2700
•  :  
• Air Consumption (m3/min): 2.1
• Hose size (mm): 19
•  :  

power drill, Circular Saw, Die Grinder, Disc Grinder, Electrical Tester

CNC Machines, jewelery machines, Reduction Gears, Workshop Machinery

• No Load Speed: 950 min -1 (rpm)
• Frequency: 50/60 Hz
• Phase: Single Phase
• Power Source: 220-240 V
• Rated Power Consumption: 1100 W
• Rated Current: 10.2 A,5.1 A
• Magnet Power Consumption: 34 W
• Magnet Holding Power: 7,056 (720) N (kgf) / 1583 lbs.
• Magnet Dimensions: 3-5/8" x 8-1/2"
• Mass Weight: 44 lbs.

air chipper, jet brooch

Compact machining width 1,165mm×height1,400mm. Overwhelming cost performance. Brilliant cutting capability realizes high productivity. On-board conversational programming software, Turnmate i is prepared as an option. Abnormal load detection function decrease the damage in case of machine crush. Safety setting up by the help of interference prevention function at debug mode. Accurate machining is realized by the thermal distortion compensation function.

impact drills, marble cutters

• Usage/Application: Cloth Drilling
• Brand: SILVER SUN
• Heating: Electric

Hydraulic auto drilling machine is one of leading dealer, trader and supplier of Hydraulic Automatic Drilling Machine in Aurangabad city which available various models and leading market prices. We can always offer you superb products on the market with reasonable price and service excellence.

• Model No. : S.P. 25-8
• Drilling Capacity in Mild Steel : 25 mm
• Machined Area of Base : 600 x 715 mm
• Dia. of Column : 127 mm
• Spindle Bore : M.T. 
• Spindle travel : 225 mm
• Max Distance Spindle Nose TO Base : 775 mm
• Max Spindle Center to Column : 665 mm
• Vertical Adjustment of Arm : 600 mm
• Size of Box Table : 205 x 205 x 285
• Overall Height of Machine : 1420 mm
• Floor Space Occupied : 700 x 1100 mm
• No. of Spindle Speed 8 (4 direct, 4 geared) : 120 x 2800 
• Spindle Feed by : Star Lever & Worm
• Drill Head Motor : 1 H.P.  1440 RPM
• Elevating Motor : .5 H.P. 1440 RPM
• Net Weight : 485 Kgs.
• Vee Belt : B 40
• Lifting Vee Belt : A 20

There are two principal parts to a Spade Drill, namely the blade and the holder. The holder has a slot into which the blade first, a wide slot at the back of the blade engages with a tongue in the holder slot to accurately locate the blade. A retaining screw holds the two parts together. Standard stub, short, long and extra long holders are available, for every deep holes, special holders having wear strips to support and guide the drill are often used. Spade drills can be given with holders having coolant holes to direct cutting fluid, under pressure, to the cutting edge.

• Drill Machine: Portable
• Control Feed: Auto
• Cutter type: TCT and HSS
• Shank : Universal Shank

We are offering drilling machine. Nitto kohki – japan make wa-5000 is an auto feed, auto control magnetic based drilling machine. this fantastic drilling machine has a drilling capacity of 12-50mm hole dia. And a plate thickness of upto 75mm. Best suitable for on-site hole-cutting in steel plates, h-beam shapes, shaped bars,framework, and other machinery, shipbuilding, bridges and structures, etc. Steel reinforcements and construction materials. This is a more advanced, one touch cutter replacement, light, quick and for better performance drilling machine. It has a slow-start mechanism to ensure a smooth cut through the mill scale and prevents cutters from breaking. automatic control and feed are activated by simply pushing the rod handle to engage the gears. The dual sensing system responds to both drilling and feeding forces on the cutter for the optimum cutting conditions. The feed speed is continuously monitored and updated proportionally to the load of the cutter. After the cut has finished, the detector responds and stops both the drill and feed motor. Coolant is into the heart of the cut and is fed directly to the inside of the cut. The coolant system also features an auto shut-off.

Iron Bar

Boring Machine, Lathe Machine -HMT, Light Duty Lathe Machine

Electronic Motors, electronic motors accessories, Heavy Duty Power Press

Wood Turning Lathe, Pillar Fly Press, Bench Vice, Blade Grinder

engineering machinery, horizontal milling center

cordless power tool

Cutting Machine, Grinder, Pump, Saw Blade

Cutters, Grinders, Saws, Hammer Drill, TCT Standard Blade

impact drills, Cutters, Orbital Sander, Heat Gun, Die Grinder, Planer