High Density Cartridge Heaters Dealers in Mumbai

• Application: Hospital
• Packaging Type: Packet

High Density Cartridge Heaters are made of nickel chromium resistance wire wound on MgO care. The element assembly is inserted into chrome nickel steel tube centrally and filled with MgO powder. It is then compacted into a solid mass by Swaging. Swaging increases thermal conductivity, dielectric strength and heater life. Features Nickel resistance wire Various termination exit option Diameter from 4mm to 30mm, length from 25mm to 1200mm Inbuilt J type or K type thermocouple Maximum sheath temp 600 deg C Watt density 50 watts per sq inch Direct immersible in liquids Application Packaging machine Pet perform moulds Dies and moulds Hot stamping machines Heat sealing machines Glue guns Heating of liquids

Pratik Heat Products Pvt. Ltd is engaged in offering CE certified High Watt Density Cartridge Heaters that are appreciated by our world wide clients. We have 40 Years of practical experience and have been sucessfullying offering the clients with PHP Cartridge Heaters ensures highest quality standards. This High Watt Density Cartridge Heater is widely appreciated for its durability, efficiency, high operating temperature, non-corrosive body, flawless finish, bottom end welded with disc washer and power saving quality. NiCr of higher grade is evenly wound over a supporting core that is filled with high purity magnesium oxide and is then compressed into a homogenous mass. High Watt Density Cartridge Heater that we offer is priced reasonably. Silent Features : CE CertifiedMin Dia - ¼� & 6mm, Max Dia - 1� & 20mmMin length � 1 1/2� & 40mm, Max length � 40� & 1000mmRobust Terminal with choice of ExitsSealed Bottom with Conical End disk to prevent contamination and for easy replacementsAvailable with in-built Thermocouple.Even heat profile & Max temp up to 750oCVarious Watt Density option availableStandard sizes availableHighly Non-corrosiveSuperior Life expectancyAvailable with various Lead Exits & Cable Protection optionSpecially selected High Purity Magnesium Oxide Applications : Hot Runner BushingsMarking & Sealing MachineryPackaging IndustryMedical & Laboratory ApparatusShoe Making IndustryDie and platents

MICA/CERAMIC:Band Heater(Power Saving up to 30%): Plastic Industries. Low/High watt density Cartridge Heater : Packaging Ind.,Mould, Dies & Hot Runner & Rubber Industries. Strip/Finned Strip, "U" Shape/Finned "U" Type, Infrared,Quartz Heater: Oven & Pharmaceuticals. Water/Oil Immersion: Engineering Industries, Boilers & Pharmaceuticals. Silica,Glass,S.S.,Alkaline Lead cover type Heater : Chemical & Plating plant. Heaters as per Customer's specification

• Material: Aluminum, Copper, Galvanised, Stainless Steel
• Certification: CE Certified, ISI Certified
• Application: Industrial Use
• Color: Grey, Sliver
• Condition: New, Used
• Automatic Grade: Automatic, Manual
• Warranty: 1Year, 2Year
• Features: Durable, Easy Installation, Eco Friendly, Fast Heating, Good Capacity, Noiseless Operation, Rustproof, Stable Performance

We are the main supplier of this product.

Uses : Plastic extruders, plastic molding, hot runner molds, shoe machinery, hot stamping, food processing, medical equipment, heating gases & liquids, packaging equipment, glue guns, molds &dies.Construction : High density wattage permit smaller heater to be used with good life expectancy. This results in up front as well as long term cost savings.Swaged construction (after heater is constructed than diameter reduces) provides maximum support for resistance wire, eliminating the effort of vibration & shock vertical mounting is also possible.Excellent heat transfer characteristics permit improved life expectancy over other style heaters.Higher density heaters are constructed in SS or inconal tubes.Working Temperature : Application upto 800°C.While Placing Order : Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

High density cartridge heaters They are valuable for alleviating problems created by high watt densities, high wattage, excessive vibration, poor fit, or where short heater life is a constant problem.Widely used to heat the plastic injection molds, dies, hot plates, platens and many more applications

Prayosha's High Density Cartridge Heaters are design for longer life through superior manufacturing process. Heating coil is wound around a ceramic core and isolated from the outer sheath through high purity MgO for high degree of thermal conduction.

APPLICATION To Heat dies & moulds, Smelting of materials, heating of fluids & heat welding etc. HD cartridge heaters are able to with-stand the toughest working conditions such as vibration, moisture, fluids, spills, frequent expansions & where the temp. Is 400 to 750 Deg. C. are required, or temperatures within a limited space.     CONSTRUCTION High-wattage cartridges belong to a new generation of electric heat-ing elements; they make it possible to use high watt loads in small spaces, thus ensuring excellent reliability in heavy-duty work condi-tions. Their special construction technology makes them the most advanced type of heating elements. The entire length of the wire wound around a magnesium oxide core is in a far away position from the axis of the cartridge, very close to the metal sheath, with a very thin and compressed insulating wall in between; this allows excellent heat exchange that allows a much lower temperature of the resis-tance wire than in other heaters in which the wire is in a deeper posi-tion. Besides the use of advanced technology and precise inspection techniques in their manufacturing. INSTALLATION & PRECAUTIONS The hole where it is going to be isntalled, the cartridge must have a diameter tolerance between –0.02 to –0.06 mm (depends upon watt density, higher watt density must have lower tolerance). The cartridge must not be longer than the hole where it is installed. Connecting leads must not be scratched, flattened, stained, wet, etc. The cartridge heaters cannot work in open air. Controlling systems must be used with the cartridge heaters. Resistance Tolerance: + 10% - 5% Wattage Tolerance: + 5% - 10% Length Tolerance: +/- up to 5mm The sensors for the controller should be placed between the working surface of the part & the heaters. The temperature of the part approximately half inch away from the heaters is used in selecting maximum allowable watt density. Control of power is an important consideration in high watt density appl cations. On/Off control is frequently utilised, but it can cause wide excursions in the temperature of the heaters & working parts. Thyristor power control are valuable in extending the life of the high watt density heaters, since they effectively eliminate On/Off cycling.

• Power: ± 10%
• Voltage: 24 to 250 Volts
• Outer Sheath Material: Chrome Nickel Steel, welded end disc washer of same material.
• Maximum operating temperature 7500C: Sheath can be ground for precision tolerance (Only for heaters with crimped on leads)
• Heating Conductor: NiCr 80:20
• Leakage Current: < 0.5 mA
• High Voltage: 800 V
• Surface Loading: Upto 150 watts/in 2
• Lead Orientation: A) Crimped on Leads : PTFE/Fiberglass Flexible lead crimped on solid pin emerging from the heater.

HIGH WATT DENSITY CARTRIDGE HEATER – APPLICATIONS Hot Runner Bushings Packaging Industry Shoe Making Industry Marking & Sealing Machinery Medical & Laboratory Apparatus Die and Planets HIGH WATT DENSITY CARTRIDGE HEATER – FEATURES Min Dia : 3mm & 35mm Min length : 24mm & 40mm Max length : 50" & 1270mm Available with in built Thermocouple Highly Non-corrosive Various Watt Density option available Even heat profile & Max temp up to 7500C Specially selected High Purity Magnesium Oxide Standard Sizes Available Superior Life expectancy Available with various Lead Exits & cable Protection options Sealed Bottom with Conical End disk to avoid contamination and for easy replacements

We offer high density cartridge heater. To meet diverse requirements of our esteemed clients all over the nation, we are offering a huge assortment of high density cartridge heaters that are built with premium materials to maximize field performance. This offered variety is exclusively used widely in high temperature electric furnaces and electric heating devices. This is stringently tested by our quality controllers in order to dispatch flawless range at clients end. features: high temperature anti – corrosion easy installation

We are a notable Manufacturer and Supplier of High Density Cartridge Heater. High Density Cartridge Heater that we offer is corrosion resistant and robust. The High Density Cartridge Heater has a long life even at very high temperatures. High Density Cartridge Heater, available with us, is suitable for high temperature heaters.

We bring to you, High Density Cartridge Heaters. The High Density Cartridge Heaters provide effective solutions for problems created by high watt densities, excessive vibration, high wattage, poor fit, or poor durability. The High Density Cartridge Heaters have been extensively used in cartridge heaters throughout the industry. In addition, the High Density Cartridge Heaters provide high thermal conductivity and uniform heating shock and vibration resistance. Applications Plastic injection moldsHot platesDyes

These are Made of Heating Conductor grade Ni-Cr 80:20 is evenly wound on a supporting mgo core, which is co centrally placed in a Chrome- Nickel Steel tube after which the inner vacant space is filled with specially selected high purity magnesium oxide powder. This assembled unit is then highly compressed in a SPM, thus converting the core, powder and conductor into one homogenous mass. The bottom end of the heater is welded with a disc washer for prevention against contamination. Uses :- Packaging Industry Marking & Sealing MachineryHot Runner BushingsMedical & Laboratory ApparatusShoe Making IndustryDie and platens3-D Printers   MAIN FEATURES :   1. Min Dia: 1/4” & 6 mm 2. Max Dia: 1” & 32 mm 3. Min length: 1½” & 40 mm 4. Max length: 40” & 1000 mm 5. Standard Sizes Available 6. Various Watt Density option available 7. Available with in-built Thermocouple 8. Highly Non-corrosive 9. Even heat profile & Max temp up to 750°C 10. High Purity Magnesium Oxide 11. Superior Life Expectancy 12. Available with various Lead Exits & Cable Protection options 13. Sealed Bottom with Conical End disk to avoid contamination and for easy replacements

High Density Cartridge Heater, Mica Band Heaters, high density nozzle heater

high density cartridges heater, Industrial Heater, Tubular Heater, Ceramic

High Density Cartridge Heaters, electric immersion heater, Tubular Heaters

high density cartridges heaters, low density cartridges heaters

High Density Cartridge Heaters, Ceramic Band Heaters, Mica Band Heater