High Voltage Circuit Breaker Dealers in Mumbai

• Type: Outdoor type,Off load,Triple Pole Horizontal Vertical Gang Operated Switch,Tilting Type,Single Break Type.
• Power: 11,000 volts
• Condition: Good
• Capacity: 200 amp also double break rotating up to 33kv line
• Place Of Origin: Pune,Chakan
• Min. Order Quantity: As Per Client Requirement

We are offering electrical isolators. :-“transpower” make, outdoor type, off load, triple pole horizontal vertical gang operated switch, tilting type, single break, consisting of hot dip galvanized channel iron base, original h.t. Post insulators, copper or copper alloy high pressure heavily tinned complete with horizontal connecting sq.bar, g.i. Pipe as down rod, coupling for pipe, lever and operating handle with locking arrangements, manufactured as per i.s.s 18181961 voltage: 11,000 volts. (using 3 nos. Of 11kv post insulators per phase) current carrying capacity 200 amp also double break rotating up to 33kv line

• Voltage: 12/13.8 kV
• Rated Current: 630
• Country of Origin: Made in India
• Degree Of Protection: IP 67
• No. Of Poles: 3
• Brand: ABB

• Type: Electrical Isolator
• Application: Industrial, Machinery
• Feature: Easy to Use
• Driven Type: Electric
• Warranty: 1Year
• Brand Name: Havells

Canopus Instruments is one of the top manufacturers and suppliers of signal isolators. We provide top quality signal isolators which provides exceptional isolation.

We make available the products using the exceptional quality raw material that is experts certified. This makes our product range completely reliable and genuine. All thanks to our smart inventory management owing to which safe and quick deliveries are furnished by us.Function : The Isolating Base senses and isolates short circuit faults on XP95 and Discovery loops and spurs. Features : The base is loop powered, polarity sensitive and accepts the XPERT card to set the associated device address. In short-circuit conditions the integral yellow LED is illuminated. The detector associated with the base remains active under short-circuit conditions. Power and signals to the affected section are restored automatically when the fault is cleared. Protocol Compatibility : The Isolating Base is intended for use with equipment using the Apollo XP95 and Discovery communication protocol.

• Conversion Accuracy: 0.25%
• Input: 4-20mA
• Output: 4-20mA

nippon ISOXR Series is high performance Signal Isolators. The signal Isolators provides excellent isolation between Input & output Signals. This provides noise free isolated signal to the system with accurate conversion fact nippon ISOXR Isolators are housed in ABS molded din rail enclosures. Once again the indigenous R &D offers cost effective solution Application: A/D and D/A conversion Data Transmission Transducer Interface System Isolation DCS, SCADA, Data Aquisition PLC, AC drives Industrial Process C

• Country of Origin: India
• Type: Load Break Switches
• Certification: ISI Certified
• Application: Industrial Use
• Feature: Easy To Install, Electrical Porcelain, Proper Working
• Condition: New
• Brand Name: SALZER
• Poles Number: 3 POLE

• Application: Industrial/Commercial
• Material: SS 
• Brand: ABB
• Design: Standard
• Deals In: New Only

• Usage: Industrial use
• Type: Belt Sway Limit Switches
• Material: ABS
• Certification: ISI Certified
• Condition: New
• Max. Voltage: 240 VAC
• Current Rating: 6A
• Switch Type: Rotary Limit Switch

KATKO is a worldwide known manufacturer of electro mechanical devices like Load Break Switches, Switch Fuse Units with a unique futuristic design of modularity in construction. KATKO ensures the quality of their products by using independent approved test houses to make aware that the products comply with current world wide standards. Aware of the demand for KATKO's products in the Indian markets, TEKNIC has been working closely with KATKO to introduce their products in the Indian market. KATKO's products have been accepted with great respect and both TEKNIC and KATKO have decided to work closely together. KATKO's Load Break Switches, Switch Fuse are CE marked and carry international approvals like UL, FI and KEMAKEUR.

• Voltage: 3.3 Kv to 33 Kv

• Features: Lightweight, easy-to-handle, plug-in construction, Superior protection, Remove and test without disconnecting wires,

Ring Main Unit (RMU) SafeRing is a SF6 insulated ring main unit for the secondary distribution network. SafeRing can be supplied in a number of different configurations suitable for most switching applications in 12/24 kV distribution networks. The RMU has a completely sealed system with a stainless steel tank containing all the live parts and switching functions.A sealed steel tank with constant atmospheric conditions ensures a high level of reliability as well as personnel safety and a virtually maintenance-free system. The RMU offers a choice of either a switch fuse combination or a circuit breaker with relay for protection of the transformer. SafeRing can be supplied with an integral remote control and monitoring unit  

• Usage: Industrial use
• Type: belt sway limit switch
• Material: Metal
• Certification: ISO 9001:2008 Certified
• Condition: New
• Max. Voltage: 240 VAC
• Surface Finishing: Polished
• Current Rating: 10 A

As the world is moving towards highly compact and reliable power Transmission and Distribution equipment, GIS is emerging as the best solution for Power Transmission and Distribution. CG offers latest technology GIS.They are now found affordable in place of AIS. The Product comes with flexible SF6 gas insulated modules of various Equipment to suit different network configurations. GIS is emerging as the best solution for MV primary power distribution. Outdoor GIS Arista offers latest technology with only incremental cost over Air Insulated Switchgear. The product comes with flexible SF6 gas insulated plug-in compartments to suit various network configurations.

• Features: Maintenance free & sealed for life contact system,Outdoor installation,Robust construction etc.

The Type GR-1 RMU is designed with a combination of innovation and state-of-art insulation principles & current interruption techniques. GR1 is available for 12kV which can withstand 20kA for 3 seconds. This outdoor design is safe to operate with the help of mimic diagram & position indicators to guide operators. All passive interlocks, comprehensive padlocks are designed for user friendly operations and are safe.

• Temp.: 0-55°C
• Output: 4 – 20mADC (2 -Wire Loop Powered)
• Input: 4 – 20mADC (4-Wire) Loop powered input circuit

The input 4-20mA Signal from a transmitter is measured and converted into isolated 4-20mA Output signal which is exact replica of the input signal. The Circuit on the input side draws power from the 4-20mA input being measured and the output circuit draws power from the 4-20mA 2-wire Output connection. Thus no separate external power supply is needed for the unit. Optical Isolation is provided internally to isolate the input and output signals.

• Features: Transmission line arrester Modular series parallel polymeric surge arrester Modular single column polymeric surge arrester Polymeric housed surge arrester Porcelain housed surge arrester Cable sheath arrester

We provide a wide range of porcelain and polymeric transmissionsubstation surge arresters for applications up to 800 kV. The Bowthorpe EMP range of arresters has demonstrated reliable performance in environments all over the world for over 60 years.

Load Break (Isolator) range from 16 - 125 Ampere Upto 8 pole can be offered Multiple mounting options ABS / Aluminum / sheet steel enclosures Add on pole - Power / Neutral and Auxiliary pole can be offered Changeover switches upto 4 pole from 25 to 125 Amps

The belt sway switch is used for sensing the swaying of the conveyor belts due to uneven loading, worn roller surface etc. the switch is to be mounted in near vicinity of the conveyor belt with a small clearance between contact roller and the belt edge to allow normally accepted swaying. When the swaying exceeds allowable limit, the belt edge would push the contact roller which in turn would actuate the switch. When swaying stops the switch would automatically reset under the action of resetting spring. Material specification Standard assembly enclosed in aluminum housing                         

Quality measurement and good equipment are very important parameter to achive Signal integrity. However, even with the best equipment, signals can be of inferior quality if the equipment is not properly installed or it is not protected by signal isolators / signal conditioners. Radix design competency in signal isolation is one of the finest to be found. Radix signal isolators are an outstanding combination of accuracy, frequency response and signal handling. Choose from loop-powered isolators which require no external power supply and have very low loop drops, 3-port signal isolators which not only isolate input signals, but also act as signal multipliers and multiply signals to send to multple field instruments. Some of our signal isolators are HART compatible for effortless two-way field communication, that is achieved through superimposition of digital communication on top of the 4-20 mA signal. Signal isolation devices are use to eliminate ground loop errors caused by noise (ground) and other such signal interference problems.  Signal isolators use one of many electronic methods to interrupt the connections between two grounds while passing the correct signal with little or no loss of accuracy. Without a way for ground currents to flow, these currents can't induce signal errors caused by ground noise.    

Polymeric surge arresters they transmit data from the surge monitor to a receiving device (PAC-G ‘Programmable Access Controller -Gateway’). They utilise eading edge technologies in terms of reliability, accuracy and ease of use.

Features       Excellent protective characteristics       High Durability       High Energy Handling Capabilit       Excellent Insulation Property       Excellent Temporary Overvoltage Capability       Light in weight.       Easy to handle.       No air column, hence no explosion.       Can be provided with disconnector, to run the system without nterruption to the power supply, in the existence of short circuiting the Surge Arrester.          

The metal enclosed capacitor banks are a cost effective means of providing power factor correction andor harmonic filtering for your distribution feeder General Presentation Metal-enclosed capacitor bank systems are fully assembled, tested, and ready Installation. Very little field assembly is required. Installation and maintenance costs for metal-enclosed systems are low compared to pole and rack mounted capacitor banks. Energe’s metal-enclosed medium voltage capacitor systems and harmonic filters are designed for indoor or outdoor applications in commercial, industrial, and utility power systems requiring power factor correction, motor start support, harmonic filtering, and as per IEC IEEE standards

Cas-36 - MV compact RMU switchboard up to 36 kV Hi-reliable Gas Insulated Switchboard for underground secondary distribution applications, up to 36 kV. Compact self-contained totally insulated switchgear: Network switch or combined fuse switchtransformer feeder combination - Rated current: up to 630 A - Short-circuit current lsc < 20 kA 1s - Making capacity (50 kA peak) SF6 insulation (switches and busbar), - very low dimensions (1050mm), - insensitivity to ambient conditions, - maintenance free, Up to 4 (I or Q) functions, - extensible Degree of protection: IP 3X (inmersed type) Easy site installation Personnel safety

We are manufacturing and offering 11 kv g.o air break switch with triple pole. Each pole consists of galvanized steel base, h.t insulator & spring loaded contact. It has a section to break magnetizing current of transformer horizontal g.i. Pipe 01 adequate length of g.i pipes for operation from ground and operating handle complete in both on & off position. Technical specification: rated voltage : 12kv rated current : 400a frequency : 50hz impulse withstand voltage (+ve) : 77kvp impulses withstand voltage (-ve) : 76kvp also available in 1122kv air break switch.