HT Cables Dealers in Mumbai

• Type: Xlpe Cables
• Brand Name: Polycab
• Grade: Domestic Grade, Industrial Grade
• Insulation Material: Pvc
• Specification: High Voltage
• Brand Name: Polycab

HT AB Cables are a very novel concept in overhead power distribution, as compared with conventional bare conductor in overhead distribution system, AB cable provides higher safety, reliability, lower power losses and ultimate economy by reducing installation, maintenance and operative cost. This superior system is ideal for rural distribution and especially attractive for installation in difficult terrains such as hilly areas, forest areas & coastal areas etc. These cables are designed, manufactured & tasted as per international specifications. AB cable is also considered for power distribution in congested urban areas with narrow lane and by- lanes. In developing urban complex HT AB cable is a better choice because of its flexibility for re-routing as demanded by changes in urban development plan. HT AB cables are highly reliable and insulation has been developed to withstand extreme cold and intense sunlight. Disturbance and faults occur five to ten times more often in open wires lines than in AB cable lines. There is no risk in touching the live cable and the insulation reduces the number of short circuits and over voltage faults in overhead cables during thunderstorms. Few hardware accessories are needed which are different for different size of cables. Streets can be lit only at little extra cost by using the cable that have an extra conductor for lighting. The cable can be supplied with one or two insulated conductors for street lighting. HT AERIAL BUNCHED CABLE - CONVENIENT USAGE In electricity theft prone areas. As placement of bare lines in rural are & narrow street with limited space. As placement of bare lines where reliabilities of power supply is of prime importance. In hilly terrains here cost of erection of overhead lines or underground cable becomes very high. As reinforcement of existing system with increase in voltage/current carrying capacity. For temporary supplies. HT AB CABLES - ADVANTAGES In comparison with bare overhead distribution line, HT AB cables have very high reliability in maintaining services because power and neutral conductors are insulated with the best dielectric, resulting in the following advantages: Less fault rate on account of good protection against line and group faults by high winds, falling trees or birds specially in hilly areas and forests encountered in rural distribution networks. High insulation resistance to earth in all seasons. Negligible leage currents and low losses. Multiplexer circuits of power and telephone cables could be in the same set of poles. Better adaptability to laid besides with existing overhead bare conductor system without any interference. High capacitance and low inductance leading to low impedance of lines. Lower Voltage drop, Higher current caring capacity  vis-a-vis better voltage regulation. Longer Span and Longer distance lines are possible with better system stability. AB Cable are more safer than bare cable. It can be laid in dense vegetation and forest areas. Additional Connection can be easily and quickly made with hot line connectors. Overall lines cost reduced. Maintenance is very Convenient. Very difficult to tap AB Cables, thus reducing theft which leads to lower distribution losses. Since the tension from the current caring conductor is totally removed by introduction of messanger wire the operating tempreature of conductor is 90’C as against 75’C therefore alowing  AB Cable to carry current equivalent to that of the same size.

HT AB Cables are a very novel concept in overhead power distribution, as compared with conventional bare conductor in overhead distribution system, AB cable provides higher safety, reliability, lower power losses and ultimate economy by reducing installation, maintenance and operative cost. This superior system is ideal for rural distribution and especially attractive for installation in difficult terrains such as hilly areas, forest areas & coastal areas etc. These cables are designed, manufactured & tasted as per international specifications. AB cable is also considered for power distribution in congested urban areas with narrow lane and by- lanes. In developing urban complex HT AB cable is a better choice because of its flexibility for re-routing as demanded by changes in urban development plan.  

KEI manufactures HT cables up to 220KV conforming to National and International Standards at Bhiwadi plant. KEI has State of Art HT cable plant with German technology. The manufacturing capability is upto 220KV. HT plant is complete with heavy duty machines for wire drawing and conductor making, laying up, armouring , sheathing and packing. The process commences with a compacted circular conductor being fed from the pay off stands into the extruder on elevated platform. The conductor passes through extruder’s crosshead, it is covered first with semiconducting screen layer then the XLPE insulation, followed by the outer semiconducting core screen. This crosshead is specially designed to feed three compounds from three extruders at one point described as Singe point Triple extrusion. Thereafter, the extruded core enters and passes through vulcanizing line known as CCV line (Continuous Catenary Vulcanising) and the XLPE insulated core is cured in the process. In CV line inert atmosphere is maintained by the Nitrogen gas which is at high pressure and high temperature. This process is popularly known as Single point Triple extrusion CDCC(Completely Dry Cured and Cooled Curing) 

Stranded Copper or Aluminum conductors are first coated with Semi Conductor compound and then insulated by XLPE compound as per the requirements of the IS for various cored cables. This core is now coated again with semi conductor compound. Copper tape now wraps to fully cover this semi conductor coated core. For three cores cable all these copper taped cores are then laid up tied up and polyester taped. These laid up cores are then inner sheathed with PVC ST2 compound. Armouring is then done by GI round wires or strip wires wound on this inner sheath.These laid up cores duly inner sheathed and armoured are then inner sheathed with PVC/FR PVC/FRLS PVC or FRZH sheathing compound.

Specializes in the manufacture of HT Rubber Cable/ High Tension Cables up to 33KV. HT Rubber Cables HV electric cable 5core copper stranded cable, HT cable Up to 33kv, HT Soft and Flex Rubber Cable manufacturers in india, Power cables - medium voltage and high temperature and Submersible Pump Cables, Heavy-current water-cooling cables for melting furnace Manufacturer in India. American approved HT Rubber Cable, CE approved HT Rubber Cable, VDE approved HT Rubber Cable and IS 9968 approved HT Rubber Cable suppliers. We deliver quality product to our customers. These HT Rubber Cables are very much efficient tool to be used in industrial and mechanical purposes. We are one of the very well known companies which have made a remarkable name and fame in the industry with its past several years of satisfactory service to its clients. These HT (High Temperature) rubber cables which we are providing our clients are also one of the supreme and highly demanded products of our company. These HT rubber cables are made up of supreme quality rubber materials which are very tough and strong as well as very much resistive towards the temperature. HT Rubber Cable Features: Long lasting material quality Very much conductive and responding Light weight Easy to install No maintenance required Very much resistive towards high temperatures also HT Rubber Cable Specifications: Conductor Material: Copper/aluminum Size: 16 mm 70 mm 120 mm 300 mm HT Rubber Cable Applications Steel Mills EOT Cranes Airport Lighting Ships Nuclear & Thermal Power Stations Wind Power Mills Electrical Machines Textile Machines Construction Equipments Turbines

• Insulation Material: PVC
• Number of Cores: 1
• Conductor Material: Aluminum
• Packing Type: Box
• Phase: Single Phase

We are involved in bringing to the esteemed clients a wide range of elastomeric cables . These elastomeric control cables are manufactured with high quality elastomer raw materials such as polypropylene, chloro-sulphoneted polyethylene (csp), nitirile rubber pvc blends, ethylene polypropylene rubber (epr) and silicone. These materials have been specially chosen to meet several heating oil and resisting requirements. Product specification: after constant research and development, we have come up with best-in-class ht elastomeric cable. These cables are widely known for their high elasticity and strength. We manufacture these cables using quality elastomeric materials to meet the is: 9968(pt-2)2002 and bs: 7835 standards. The offered cables are made for the production of advanced tools and machines. Owing to our widespread distribution network, we are able to deliver the ht elastomeric cable within a given time-frame. Features: chemical resistant high tensile strength resistant to environmental stress durable known for: high current carrying capacity remarkable mechanical properties optimum dielectric strength no moisture content excellent insulation available in: single to five cores 3.3 kv

High Power HT Cables, cable jointing accessories, Electrical Cables

We offer ht xlpe cables. Ht xlpe cables.

Ht Xlpe Cable, fire retardant wire, Solar Cable, Telephone Switchboard Cable

Clamps, power panels, lt feeder pillars, ht feeder pillars, cross arms

polycab ht cable, ct tod meter, Ht Capacitors, lt tod meter

ht power cable

ht cable, Link Boxes, Cable Wire, EHV Cable Jointing Service

HT XLPE POWER CABLE, lszh cable, Solar Cable, House Wire, Pvc Cables

ht cable, Armoured Cables, Cable, Cable Wire, instrument cable, Lt Cable

132KV Polycab HT Cable, Adjustable Wrench, Ball Bearings