Hydraulic Cylinder Parts Dealers in Marol, Mumbai

Being a reputed name in the industry, we are offering brilliantly designed and manufactured Hydraulic Cylinders to our esteemed customers. We offer SingleDouble acting or SingleMulti cylinders in vivid models like Welded design, Mill Type design, Tie rod design etc. Such cylinders come with bore ranging from 40mm to 800mm stroke up to 9000 mm. This device has work pressure up to 500Kgcm². With such configurations, our offered hydraulic cylinders work efficiently for the intended purpose.

We are Offering Hydraulic Cylinder all Shape Sizes and Capacity Available.

• Power: Hydraulic
• Shaft Diameter: 20-800 Mm
• Application: Hydraulic Press and Machine   
• Max Pressure: Up to 600 Bar
• Capacity: 5-100ton
• Stoke: As per your Requirement
• Warranty: 1 Year
• Bore: 1.5 - 8 Inch

These can be termed as special design of air telescopic cylinders. Pressure difference in the chamber of cylinder results in the movement of cylinders. There are two types, single acting and double acting. They are also termed as telescoping cylinders and multi stage telescope cylinders. Air telescopic cylinders are most commonly used in construction and pharmaceutical machineries. DESCRIPTION VISHAL Make Telescope Pneumatic Cylinder Model No.(TEL 100x500x3 or 100x700x3 125x500x3125x-700x3 having S.S.304 Piston Rod 025mm or 032mm) Total Opening Stroke 1400mm & Shaking 400mm With Rear Mounting Bracket hole to shaft 019mm pin

Enchanting our customers with our excellent performance, we have cemented our status as a top figure in the industry. As a Manufacturer, Supplier and Exporter, we proudly present Carbon Steel Surgical Blades to our customers. These are developed using the finest material and latest techniques in fulfillment with international standards. Our valuable customers can easily avail them from us in a given time frame at industry leading rates.

• Material: Metal
• Country of Origin: India
• Brand Name: Mercury Pneumatics
• Finishing: Polished
• Driven Type: Pneumatics automation
• Condition: New
• Power Source: Electric
• Automation Grade: 1
• Application: Coining, Press, Punching, Riveting
• Certification: CE Certified, ISO 9001:2008
• Voltage: 220V
• Warranty: 1year
• After-Sales Service Provided: YES, PAN INDIA
• Max Force or Load: 1-45 TONNES RANGE OF PRODUCT AVAILABLE WITH US
• Pneumatic Pressure: STANDARD @5BAR
• 8T PRESS: ALUMINIUM FINISH

• Max Pressure: 3kgf/cm2
• Operating Temperature: 0-55 Degrees Celsius
• Stroke: 50-2000 mm
• Packaging Type: Box

We are offering compact cylinders. Airmatic compact cylinder - cdacsa service :- compressed air bore: 12mm to 100 mm stroke: up to 130 mm available with without magnet compact cylinders are available from 12mm to 100mm bore sizes. They can be used in different automation applications requiring precision with economy and asthetics. Different variations are available with sensor.

One stop destination for the best in class and exceptional assortment of Hydraulic Cylinders; we are a reliable Supplier amidst the customers. In order to deliver a flawless lot of products, we keep it in safe and secure place. We have developed all the in-house storage unit wherein we keep it to prevent from damaging factors.

Gases like oxygen and nitrogen are filled in seamless steel cylinders at high pressure ranging from 150 to 200 bar. Such cylinders are also subjected to various weather conditions and handling during use at consumer’s place as well as transport, loading and unloading. Essentially, the cylinders are made of a material that has a flexibility of expansion and contraction during pressurization. For various reasons this flexibility of expansion and contraction begins to deteriorate over a period of time. Similarly, on account of other conditions such as filling, handling, transportation and shop floor conditions, there are chances of weight reduction over a period of times. It may also develop certain other defects normally rendering a cylinder unsafe for use. Globally such cylinders are required to be periodically tested for visual damages, weight loss of elasticity. In view of the dimension of damage, which can be caused by a bad cylinder, being known, most people prefer to test these high-pressure cylinders periodically. We provide a complete set-up of equipment for conducting a dependable and assured hydraulic test for such cylinders.

• Finishing: Polished
• Color: Silver
• Country of Origin: Made in India
• Usage/Application: Industrial
• Brand: CTK
• Diameter: 7 mm
• Sizes: 25 Inch

Situated in Pune, Maharashtra, we are among the sought after Exporters and Suppliers of the Hydraulic Cylinders across the globe. Known for the immaculate quality and performance, these Hydraulic Cylinders are the mechanical actuators that give unidirectional force through a unidirectional stroke.

DESCRIPTION OF CARBON VANES Carbon vanes have proved successfully as sealing elements in rotating compressors such as vacuum pumps and condensers of liquids and gases. Advantages of our MEGA-vanes grades are very good self-lubrication, and the inferior specific density of artificial carbon, contrary to metal grade vanes. They are suitable for fast running pumps by low wear. Based on experience, the leaving edges of the rotor slots must be chamfered or rounded, also the entering edges of the vanes, as to lower unwanted pressure, and thus guaranteeing an easier run-in. APPLICATIONS AND CUSTOMERS OF CARBON VANES Compressors, pumps for air (gases) and liquids, application for sliding speeds up to 12 m/sec and up to pressure differences of 3 to 5 bar Grades: hard carbon and electro graphite carbon for the Food industry, resin bonded grades for the NON-FOOD industry CHARACTERISTICS AND SERVICE The life time of carbon vanes depends above all on a precise machining of the opposite sliding areas. For the slot machining we recommend a roughness depth of approx. 1µ and a slot tolerance of H8, the surface finish of the cylinder walls should have a roughness depth of < 0,5 µ. Depending on customers’ requirements, shapes and grades can be realized and modified. APPLICATIONS Automotive Power Generation Petrochemicals Fluid Power Instrumentation Chemicals & Fertilizer Plants Electronics Filtration Pharmaceuticals Hydraulic Fittings Hydraulic Cylinders Pneumatic Cylinders Valves and Pumps Plumbing Products Dairy/Food Processing Earthmoving & Construction Equipment

• Type: Hydraulic Cylinder
• Material: Copper, Stainless Steel
• Shape: Round
• Color: Grey, Silver
• Condition: New, Used
• Finishing: Non Poilshed, Polished
• Pressure: High Pressure, Low Pressure
• Feature: Anti-corrosive, Easy To Operate, Require Low Maintenance, Trouble Free Performance

• Features: Rust proof, Excellent durability, Quality certified, Corrosion proof finish, Sturdy and tough, Uniform thickness

• Material: Mild Steel
• Type: Hydraulic Plough Assembly
• Surface Finishing: Powder Coating
• Size: 48inch
• Capacity: 6Ton
• Country of Origin: Made in India
• Application: Centrifugal Machine
• Working Pressure: 650 bar

We put forth for the clients a huge gamut of Hydraulic Cylinders. Our vendors manufacture this product using optimum quality steel alloy components. Available in different capacities and models, this product is widely used in many industries for variety of uses. Our product is marketed at highly suitable prices for the customers.

Cylinders are manufactured / reconditioned, inspected and tested in accordance with "ISO 10100:2001 : Hydraulic fluid power-Cylinders-Acceptance tests". United Van Der Horst offers complete solutions including custom made new cylinders and reconditioning of worn out damaged cylinders for all industrial applications in Steel, Cement, Pharmaceutical, Automobile, Material Handling, Earth Moving, Aluminum, Power Plants, Food Processing, Injection Moulding Machines, Mining etc. A few prestigious Hydraulic cylinders developed for steel industries would be Roll Force Cylinders / Screw Down Cylinders (AGC), Back-up Roll bending and balancing cylinders etc. with sealing solutions considering lengths and strength of bearing elements, suitable wiping elements to eliminate any kind of contamination. A complete package for the hydraulic system can be provided by United Van Der Horst today. Modified seals or OEM seals and Hoses with latest technology and sealing profiles from reputed manufacturers are also available. Special fittings tools also can be supplied to prevent damage to the seals while installation and for ease of fitment. The cylinders are coated with anti-corrosive epoxy paints or suitable surface treatments is carried out based on environment of service.

The KS2 series is well suited for heavy industry and demanding, tough, operational conditions. The cylinder works with a pressure of up to 250 bar and has been designed in accordance with the DNV set of rules. Dimension range Ø ID: Tube diameter from Ø50 to Ø250 mm Design pressure: Max. pressure 250 bar Rod speed: Max. 0.5 msec. Operating temperature: -30ºC to +80ºC

• Material: Mild Steel
• Usage/Application: Industrial
• Capacity: 2 Ton
• Max Pressure: 160 Bar
• Product Type: Hydraulic Cylinder