Hydraulic Machine Dealers in Fort, Mumbai

• Type: Stationary
• Model Number: SHM 108
• Brand Name: SABIN
• Condition: New
• Place of Origin: INDIA
• Machine Weight: 500 Kg

HYDRAULIC HOLLOW/SOLID & PAVING BLOCK MAKING MACHINE MODEL No. SHM - 108 STATIONARY TYPE BLOCK MAKING MACHINE - SINGLE PHASE SPECIAL TYPE PAVING BLOCK & HOLLOW BLOCK MAKING MACHINE WITH SINGLE PHASE 3.5 HP WITH HIGH SPEED VIBRATOR (EQUAL TO 2 NOS VIBRATOR) (2 HP FOR HYDRAULIC AND 1.5 HP FOR HIGH SPEED VIBRATOR) RPM 2880. MOTOR ISI, IMPORTED VALVE FOR PUMPS, SUPERIOR QUALITY ACCESORIES FOR PANEL BOARD. SPECIFICATIONS : Power - 3.5 HP Single Phase or 3 Phase, Hydraulic - 2 HP RPM 1440, Vibrator - 1.5 HP RPM 2880. Total Weight - 500 kg. Size of Standard Moulds : 400 x 200 x 100 mm (4 Nos)/cycle - 300/hr - 2400/day of 8 hrs. 400 x 200 x 150 mm (2 Nos)/cycle - 180/hr - 1440/day of 8 hrs. 400 x 200 x 200 mm (2 Nos)/cycle - 150/hr - 1440/day of 8 hrs. 400 x 200 x 100 mm (16" x 8" x 4") - Weight : 10 Kg. 400 x 200 x 150 mm (16" x 6" x 8") - Weight : 17 Kg. 400 x 200 x 200 mm (16" x 8" x 8") - Weight : 21 Kg. Size of Pavement Mould : 210 x 210 x 65 mm (4 Nos)/cycle - 300/hr - 2400/day of 8 hrs.

• Length and width of bed: 330 x 178 , 550 x 355, 585 x 406
• Length, Width, Depth: 1397 x 553 x 610, 1498 x 635 x 710, 1778 x 736 x 1016

We are one of the trusted manufacturers and suppliers of a wide range of Heavy Duty C-Type Inclinable Power Press. These are engineered using advanced machinery by our expert professionals in various models and specifications. Known for high operational efficiency, low maintenance cost and longer service life, these are demanded by our customers based all over India.

• MAIN FEATURES: Max. honing capacity diameter
• 200 mm: Max. honing stroke
• 400 mm: Min. honing stroke
• 50 mm: Max. distance table to spindle nose
• 1000 mm: Dist from spindle centre to column
• 380 mm: Surface of table
• 1400 x 450 mm: Table traverse
• 1700 mm: OPERATING SPEEDS
• Spindle speeds: 50-300 rpm
• Infinitely variable: Reciprocating speeds
• Infinitely variable: 0-16 m/minute

motorised Hydraulic Pipe Bending Machine ideally suitable for bending water (G.I. Pipes), gas or steam pipes without filling or heating etc., with hydraulic pressure and reverse pressure control, hydraulic motorised pump is suitable for operation on AC 440/3/50 electric supply continuously rated with push button starter gives uniform hydraulic output and faster cylinder operation. The machine is equipped with "EJECT-O-Mactic" device (except Model AMI-6 & AMI-8 which is segmental type) which takes out pipe from the bending former hydraulically. Complete with standard centre former for G.I. Pipes ("C" class), outer formers and head plates etc. Suitable electricals with 3 phase 440 volts with starter, hydraulic trolley

• Usage: Recycling Scrap Materials, Recycling Waste Paper Scrap
• Weight: 100-1000kg, 1000-2000kg
• Color: Black, Blue, Brown, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Operating Mode: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1year, 2years
• Driven Type: Hydraulic, Electronic

We are the main supplier of this product.

• Usage/Application: Pipe Bending
• Operation Mode: Manual
• Power: Hydraulic
• Brand Name: AECO
• Max Bending Radius(mm): 50-250 mm

• Driven Type: Hydrualic
• Material: Cast Iron
• Automation Grade: Semi-Automatic
• Spindle Speed: 1400 / 2800 RPM
• Warranty: 1 Year
• Minimum Order Quantity: 1 Piece

• Voltage: 220
• Weight: 40kg
• Barometric pressure: 0.7 MPa

  Heavy Duty Hydraulic Type Paver Machine - Model No. SPM - 6 This Machine makes paver blocks. It has been placed on the machine and total capacity will be 1400 to 1500 nos per day of 8 hrs. The quality of the pavers are very strong and can be laid in petrol pumps, swimming pools, parking areas, courtyards, container yards, road size foot-path and in many more areas. Considering this demand, we have introduced this new machine. The salient feature of this machine is it has a twin advantage of operating from front side and back side. Same size mould or any different two types of mould can be used simultaneously. We can manufacture any type mould as per customers specification. Specification : Total Motor 7.5 HP, 3 Phase 1440 RPM Pressing Load 40 to 50 Ton,Cylinder Bore Size 125 mm, Hydraulic Oil 120 Ltr.

HYDRAULIC CYLINDRICAL GRINDER MACHINE

Automatic Brake and Friction Clutch system avoids double stroke - Crankshaft made of Carbon Steel - Suitable for Shallow and Deep Drawing Applications - For forming Round, Square, Oval and Rectangular Shapes - For making utensils like Pots, Pans, Tops, Covers, etc. from Stainless Steel, Brass, Aluminium, Copper, etc.

• Weight: 18

High tensile and tempered cast iron Flame hardened bed Well designed hydraulic booster provides steady clamping force against shock and vibration during operation 3 steps clamping range for large opening

This is a steel fabricated body hydraulically operated 300 tons capacity press specially designed for minting gold and silver coins and medals. This coin making press is an upstroke press with higher ram travel speed and with extra hydraulic cylinder for return stroke to increase the production. The press is equipped with hydraulic Power Pack consisting of Piston Pump, Electric Control board operated directional Control Valve, relief Valve, Pressure Gauge and standard hydraulic accessories. This coin making press can be operated through the control panel board or manually and has the provision to adjust the coining pressure. A timer is provided to adjust the time for which the final embossing pressure is applied before return stroke. Our standard version Hydraulic Coining Press is available in four models: 50 Tons, 100 Tons, 200 Tons and 300 Tons Capacity. Kindly ask for more details.

• Shipping Weight: 32.5 kg (approx.)

Wax Injection Machine: Vacuum Wax Injector With Auto ClampWax Injection Machine: Vacuum Wax Injector With Auto ClampVWax Injection Machine: Vacuum Wax Injector With Auto ClampWax Injection Machine: Vacuum Wax Injector With Auto Clamp

We offer Hydraulic Ratchets. Hydraulic Ratchet Square Drive with extreme performance and high power capacity

Being one of the renowned Industrial Hydraulic Accessories Suppliers, we aim to provide these accessories at most discounted price in the Industry. Our Hydraulic & Pneumatic Fittings are highly efficient and durable. We procure quality accessories from reputed manufacturers of India due to which they have high tensile and definite structure. Also, we offer them in various finishing. Our Hydraulic Fitting Accessories are used for various Industrial applications. The quality Hydraulic Accessories available with us are served in various technical specifications. We cover an entire range of Hydraulic & Pneumatic Fittings that include the following :High & Low Pressure Hydraulic Hoses for Air, Water, Suction, OilIn PVC Nylon Braided, Rubber, SS Wire Braided Hoses with End Connections, Steel & SSHydraulic FittingsHydraulic ValvesConnectorsQuick Change CouplingsCamlock CouplingsMale & Female AdaptorsHose ClampsCylinders, Solenoid Valves, Regulator, FRL,PU tubes, Compression Tube FittingsInstrumentation Pressure Gauges & Accessories and all types of Pneumatic One Touch Fittings and Brass FittingsOur Hydraulic & Pneumatic Fittings are available in the following make : FESTO, JANATICS, LEGRIS, SHAVO, NORGREN, DANCAL, MERCURYGatesParkerH-Guru

Tread Brake Unit type BF2S as per SAB-WABCO design is a very compact device integrating entire brake actuating mechanism for Railway vehicles comprising of Brake Cylinder, Levers for magnification of Braking efforts, Slack Adjuster to keep Cylinder stroke constant irrespective of Brake Shoe Wear and Brake Shoe Holder with twin Brake Blocks.

A prominent supplier of huge range of Hydraulic Press.

Diamond Hone Tubes” is the market leader in hydraulic machine spare parts trading. Our product range quality and serviceability are considered as “The Best” in the Middle East. Material can be cut to length or supplied in random as per your requirement. Our Workshops are equipped with industry’s best machines. Our engineers and technicians are trained by the original equipment manufactures. We have our own dedicated team to dispatch with back up from major shipping services in the whole Middle East. Collection are accommodated on the same day of order, wherever possible, to meet your needs during emergency breakdowns. Our order taking, design, production, quality control and the dispatch systems are fully automated. Quality in service is our motto.

Is used to stretch tubes with different length to equal length.   Functions : 1. Advanced technology which cuts the cost 2. Hydraulic stretching, stable quality. 3. PLC automatic controlled. easy to operate. 4. Accuracy: + /-0.5mm   Main Technical Parameters 1. Power supply: Triphase 380V 50Hz 2. Rated power:3.8KW 3. Air supply:5-7 kg/cm2 4. Applicable tube diameter: Φ6mm-Φ16mm ( It can be custom-made) 5. Efficiency: 5000pcs/8h 6. Size ( L * W * H ) : 4600*1200*1650 ( mm ) 7. Weight: 720kg

We are leading supplier of huge range of Hydraulic Equipment.

Hydraulic Pipe Bender, Hydraulic Equipment, Hydraulic Products

• Brand Name: SuperBlanks
• Usage: Industrial
• Size: 16''x24"
• HSN Code: 8443

We are offering hose crimping machine. hose crimping machine capacity from 3/16"id to 6" id hose. Hydraulic as well as industrial hoses crimping machine. Range starts from inr 2 lakh to inr 12 lakh. Both indian as well as imported branded machine.like uniflex,techmaflex,parker,yokohama.

hydraulic machinery, Pumps, plc equipments, tool room items

Hydraulic Equipments

Hydraulic Shearing Machines, crankshaft grinders, friction screw presses

Hydraulic Paper Plate Machine, Hydraulic Scrap Baling Press