Hydraulic Pumps Dealers in Andheri East, Mumbai

CHOOSE YOUR BASIC PUMP, SELECT YOUR ACCESSORIES, AND WE WILL ASSEMBLE, TEST AND SHIP YOUR PUMP. ORDER A “CUSTOM BUILT” HYDRAULIC PUMP “Assemble to Order” means you can choose a basic pump with gas, air or electric motor. Then select the proper valve, gauge, pressure control, motor control and reservoir. You get a two-stage pump that gives high oil volume for fast cylinder approach (and return with double-acting cylinders) in the first stage and high pressure in the second stage. 1.) 1 1/8 HP UNIVERSAL MOTOR These motors start under full load and are suitable for operation up to 5,000 or 10,000 psi. The motor is 1 1⁄8 hp, 12,000 rpm, 115 or 230 volt (specify), 50/60 cycle A.C. single phase (25 amp draw at 115V.). With proper valve they can be used with single- or double-acting cylinders. Remote control available. 2.) 1 1/2 HP JET MOTOR, SINGLE & THREE-PHASE Feature low noise level, moderate speed for long service and are ideal for fixed applications. Motor is 1 1⁄2 hp, 3,450 rpm, 115 or 230 volt, 50 or 60 cycle (specify), A.C. single phase with thermal overload switch. Can be used with single or double-acting cylinders and equipped with remote control. Also available in 230/460 volt, three-phase (specify). NOTE: These do not start under full load unless valve is in “neutral” (requires open or tandem center valve) and are not recommended for frequent starting and stopping. 3.) 3 HP JET MOTOR, THREE-PHASE Gives low noise level and long life due to its moderate operating speed. Ideal for fixed installations. Consists of basic 10,000 psi pump, jet pump motor: 3 hp, 3,450 rpm, 230/460 volt, 60 or 50 cycle (specify). A.C. threephase, with thermal overload switch. Equipped with internal and external relief valve. Will start under load. 4.) 3 HP AIR MOTOR This pump is ideal for use where electricity is unavailable or cannot be used. The 5,000 or 10,000 psi pump has a 3 hp air driven motor at 3,000 rpm (optimum performance based on 80 psi air pressure and 50 cfm at the pump). You can drive single- or double- acting cylinders with the correct valve. NOTE: 80 psi air supply required to start under full load. 5.) GASOLINE ENGINE This version is perfect when electricity and air are unavailable. It is capable of continuous operation at full pressure. Consists of basic 10,000 psi pump, 4-cycle Briggs & Stratton “Diamond Edge” gasoline engine, developing 6 hp. As with all these pumps, this unit can be valved for use with either single- or doubleacting cylinders.

MHP/M Gear Pumps & Motors have the durability and reliability of this time tested design. Metaris has combined this technology with modern manufacturing processes making the Metaris gear unit high quality and dependable products.   Bearing Pumps & Motors are available in 10 models with a variety of mounting flanges, shaft configurations & porting options. Multi-section units, piggyback designs, dowelled assemblies & flow dividers are all available.

• Type: Hydraulic Pumps

• Features: Minimum noise, No leakage, Energy efficient

ZIP have developed some fastners threaded hardware items which are use full for Hydraulics, Pneumetics, pymps and valve units components are, BSP, BSPT, NPT, NPTF, M. M size Hex Socket type straight and Tapper plugs, Sq head and Hex head type Sq head plugs, Hex socket type Allen plugs / Closser plugs. Hex hd flanged / coller plugs. Hex thin head plain plugs. Copper packing washers Nylon and PVC washers. Long size 4 mm 5 mm 6 mm 8 mm 10 mm dia. x 40 mm to 280 mm long Allen Bolt, HTS Nuts, lock nuts, Hex head bolt, Screws, Stud, Full thread spindle, Eye Bolt, T-Bolt, T Nut, Machine washwers. Star washer, Dowel Pin, Tapper Pin Grooved Pin, Circlip etc. items. Pressure plugs, Fine pitch, Hex head Sc - Bolt, Sc. with internal threaded tapping.   STANDARD REF     It can be supply as per IS, BS, JIS, ISO, ASTM, GOST or DIN Standard. If non standard then as per drawing sample.   THREADS DETAILS   M. M. Size std coarse and fine pitch, BSW, BSF, UNC, -UNF BA, BSP, BSPT, NPT, NPTF and No size 4No to 12 No NC-NF threads, Tapper thread plugs.   GRADE   M. S. 4.6, HTS, EN-8, 6.6, -8.8, EN-19-10.9, En-24, -12.9, Brass SS 304 - 316 A-193 B7, A-194 2H, R-S-T-V grade, possible to supply with "SURSULF" liquid Nitriding and Nitrocarburising Process.

Plunger & Diaphragm Type High Capacities and Pressures Robust Design Flow can be adjusted by changing motor speed. Wide range of liquids can be pumped Wide range of plastic & Metallic MOCs

Hydraulics Oil Pumps, Pipe Clamp - Heavy Duty, Rail Nut Pipe Clamp

hydraulic diaphragm pumps, Diaphragm Pumps, Plunger Pump

Ordering Wright Flow Technologies complete pump & drive units saves time & money. These systems include pump, base plate, motor, couplings, guards & speed reduction if needed. Close & long coupled styles are available. One stop shop - get your pump & motor from one supplier Pre-alignment from factory minimizes final alignment at installation Competitive pricing direct through Wright Flow Technologies Single source responsibility

Radial Piston Pumps, Lube Oil Filtration Systems

Hydraulic Pumps, Anchor Chains, water pump motors, turbo chargers

Electric Driven Hydraulic Pumps, 1 - 1 1 / 2T Spreader

Hydraulic, O Rings, Moulded Rubber Products, Rubber, Rubber Products

Hydraulic Piston Pump, industrial machine spare parts, metal gears

Hydraulic Pump, Diaphragm Pumps, Water Pump

Hydraulic, pneumatic, Mechanical spares & engineering products

Hydraulic Pumps, hydraulic spare parts, cold rolling mills

Hydraulic Pumps, Cylinder Liners, Water Pumps, Connecting Rods