Hydraulic Pumps Dealers in Midc, Mumbai

• PE8LXX3L: 100/115VAC 50/60 Hz
• PE8PXX3L: 220/230VAC 50/60 Hz

1500 BAR Electric pump Light weight (45.5 LBS/ 20.6 KG without oil) and compact for portability and working in small spaces. Low Current draw allows for remote location use Heavy duty drive train provides durability for rapid and repetitive cycling applications. Quality Means Lower Life-Cycle Costs: Over 100,000 cycles Continuous Duty (even at 50deg. C/ 122 deg.F ambient) Proven design: proven reliability Enhanced Usability: Light weight and portable: 45.5lbs/20.6kg (without oil)  Removable Control Pendant (15ft/5m) cord length Removable 4" Calibration capable gauge Universal Motor for reduced voltage applications (up to -20% nominal voltage) Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Maximum Oil Capacity: (vented reservoir) 1.0 Gallons / 3.8 L (to fill line) 0.9 Gallons / 3.4 L (useable) Operating Environment:Temperature: -13°F to 122°F / -25°C to +50°C (If temperatures are at extremes of the operating range, it is recommended to use hydraulic oils that are rated for those temperatures. Refer to service manuals and cooling options) Sound Level:82 – 86 dB A Pressure:0 – 21,750 psi (0 – 1500 bar) Typical Flow:168 cu-in/min – 8 cu-in/min 2.7 L/min – 0.13 L/min Power:0.5 HP Universal Motor (115 volt – 50/60 Hz) 11 amps (230 volt – 50/60 Hz) 5.5 amps 

ZIP have developed some fastners threaded hardware items which are use full for Hydraulics, Pneumetics, pymps and valve units components are, BSP, BSPT, NPT, NPTF, M. M size Hex Socket type straight and Tapper plugs, Sq head and Hex head type Sq head plugs, Hex socket type Allen plugs / Closser plugs. Hex hd flanged / coller plugs. Hex thin head plain plugs. Copper packing washers Nylon and PVC washers. Long size 4 mm 5 mm 6 mm 8 mm 10 mm dia. x 40 mm to 280 mm long Allen Bolt, HTS Nuts, lock nuts, Hex head bolt, Screws, Stud, Full thread spindle, Eye Bolt, T-Bolt, T Nut, Machine washwers. Star washer, Dowel Pin, Tapper Pin Grooved Pin, Circlip etc. items. Pressure plugs, Fine pitch, Hex head Sc - Bolt, Sc. with internal threaded tapping.   STANDARD REF     It can be supply as per IS, BS, JIS, ISO, ASTM, GOST or DIN Standard. If non standard then as per drawing sample.   THREADS DETAILS   M. M. Size std coarse and fine pitch, BSW, BSF, UNC, -UNF BA, BSP, BSPT, NPT, NPTF and No size 4No to 12 No NC-NF threads, Tapper thread plugs.   GRADE   M. S. 4.6, HTS, EN-8, 6.6, -8.8, EN-19-10.9, En-24, -12.9, Brass SS 304 - 316 A-193 B7, A-194 2H, R-S-T-V grade, possible to supply with "SURSULF" liquid Nitriding and Nitrocarburising Process.

Lube Oil Filtration Systems, In-line Single Stage Centrifugal Pumps

Ordering Wright Flow Technologies complete pump & drive units saves time & money. These systems include pump, base plate, motor, couplings, guards & speed reduction if needed. Close & long coupled styles are available. One stop shop - get your pump & motor from one supplier Pre-alignment from factory minimizes final alignment at installation Competitive pricing direct through Wright Flow Technologies Single source responsibility

MHP/M Gear Pumps & Motors have the durability and reliability of this time tested design. Metaris has combined this technology with modern manufacturing processes making the Metaris gear unit high quality and dependable products.   Bearing Pumps & Motors are available in 10 models with a variety of mounting flanges, shaft configurations & porting options. Multi-section units, piggyback designs, dowelled assemblies & flow dividers are all available.

• Type: Hydraulic Pumps

No Leakages/ Robust Design Hydraulically Balanced Sandwich (Double) Diaphragm with Rupture Detection Built in Safety Relief Valve High Pumping Pressures & API 675 Accuracies Low NPSHR Continuous Hydraulic oil venting Wide range of plastic & Metallic MOCs Positive return stroke mechanism Permits pumping of slurries and viscous liquids The diaphragm is hydraulically actuated. Its function is basically that of a partition. Hence, very high pumping pressures can be attained. The diaphragm material is usually Teflon but also supplied in Stainless steel in some cases for extreme duty conditions & temperatures. There is no leakage of the process fluid as it is hermetically sealed. The diaphragm has a long life as it is always in hydraulic balance, with the liquid being pumped on one side, and process fluid on the opposite side. The system is safe guarded by a built in relief valve on the hydraulic side, a diaphragm actuated compensating valve & Continuous Hydraulic oil venting system. A rupture detection system is provided to detect diaphragm failure, in order to prevent the contamination of the metered fluid. The two diaphragms are marginally separated by a spacer, and are linked together by a light vacuum. In case of diaphragm failure the vacuum turns to pressure which is indicated by a compound gauge or switch. There is no intermediate fluid which virtually eliminates the possibilities of contamination of the pumped liquid. The pumps are of glandless design eliminating all kinds of leakages.

Hydraulics Oil Pumps, Pipe Clamp - Heavy Duty, Rail Nut Pipe Clamp

• Features: Minimum noise, No leakage, Energy efficient

Hydraulic Piston Pump, industrial machine spare parts, metal gears

Diaphragm Pumps, multi cylinder plunger pump, Metering Pump

Electric Driven Hydraulic Pumps, 1 - 1 1 / 2T Spreader

water pump motors, turbo chargers, pump motors, Oil Purifiers

Hydraulic, pneumatic, Mechanical spares & engineering products

Hydraulic, Moulded Rubber Products, Rubber, Rubber Products

Electric Motor

Valve Tappets, Valve Seats, Cylinder Heads, Rocker Arms

Hydraulic Pump, Diaphragm Pumps, Water Pump