Immersion Heaters Dealers in Mira Road, Mumbai

• Power: 500-1000 W
• Country of Origin: Made in India
• Voltage: Upto 600 V
• Tolerance: +- 10 %
• Frequency: 50 Hz
• Temperature: 500degF
• Heater Material: Ceramic
• Brand: Magma

We are among the reliable Manufacturers and Suppliers of Oil Immersion Heaters. The Oil Immersion Heaters are widely used for oil heating and oil circulating in systems that offer heat to oil jacketed kettles, plastic & chemicals processes, and other such equipment. Clients can avail Oil Immersion Heaters from us at very affordable prices. Specifications Steel tubular sheathed brazed to a C.I. flangeProvided with thermostat pocket, earthing terminals, & cap

• Voltage: 230 V
• Phase: Single Phase
• Heater Material: Plastic And Mild Steel
• Size: 8inch(Length)
• Frequency: 50 Hz
• Power: 1000 W

Tubular elements used for heating liquids (corrosive and non-corrosive) are known as immersion heaters. For corrosive medium, sheath of the element can be enclosed in metallic or non-metalic Element casing made of special alloy can be used for longerlife of the element. Available in ranges of 1 KW to 4.5 KW with adaptor fittings 1" B.S.P to 21/2 " B.S.P threaded brass flanges duly nickel Chromium plated. Heaters high rating are available on request with flanged connections. The Photographs are those of water 7 oil immersion heaters simultaneously. Applications Air-conditioning Pharmaceutical Chemical Textile Nuclear and many more industries.

The easy and convenient and economical way of mounting medium size bearing is by using UNIQUE SPIRALELECTRICAL HEATER. Even today we find quiet a few outdated methods being followed and their shortcomings are beinghigh lighted over here. Use of naked flame for e.g. is risky and does not ensure uniform heating. If an oil bath is used it may  resultin dirt entering the bearing. Dripping of hot oil is not only hazardous but also messy. In fact they are against today’s ecologicalnorms Use of hammers or other pressing forces may damage the bearing and cut short its life. Thus the ideal solution for medium  sizebearing is to heat and mount by UNIQUE SPIRAL ELECTRICAL HEATER. They are eco friendly. EASY TO USE:• Connect the unit to the suitable electrical point• Mount the suitable coil at the center point. And switch on the unit.• Select the required temperature.• Place the bearing or the heating component on the centering support.• Press the start button.The spiral heater does the rest and will automatically switch off when the desired temperature is reached. Removethe heated job by the special hand gloves provided with unit and mount the same in placeFEATURES :The UNIQUE SPIRAL HEATER is supplied with heating coils of 1 KW and 75 KW. 1 KW coil is used for heating  bearingof bore size 55 mm to 100 mm. The 1.75 KW coil is used for heating the bearings of bore size 100 to 150 mm .. The heating coilscan be easily changed since they are just of plug in type. The unit ensures uniform heating through the centering support Thetemperature control sensor is in contact with the inner ring of the bearing. Once the set temperature is reached the same can beseen on the display panel and one can hear the audio alarm signaling the job has been heated. The unit is provided with a microswitch which switches off the current once the job is heated to the set temperature. This is an additional safety feature provided.Apart form bearing couplings, cams rings etc. can also be heated to an accuracy of +I- 2 deg C    

Tubular elements used for heating liquids (corrosive and non-corrosive) are known as immersion heaters. For corrosive medium, sheath of the element can be enclosed in metallic or non-metalic Element casing made of special alloy can be used for longerlife of the element.Available in ranges of 1 KW to 4.5 KW with adaptor fittings 1" B.S.P to 212 " B.S.P threaded brass flanges duly nickel Chromium plated. Heaters high rating are available on request with flanged connections. The Photographs are those of water 7 oil immersion heaters simultaneously.

Uses : Immersion heaters are the heaters which are used mainly for heating water, oils, mineral oil, vegetable oil, fuel oil, chemicals, alkaline, acidic & non-acidic solution kept in tanks.Construction : The immersion heaters are sheathed in S.S. or mild steel or incoly tube or copper as per the requirement. The dia of tube is available from 8.2 mm dia onwards. This heater is fitted to the tank through a check nut for horizontal (through the side) mounting or with flange for vertical (over the side)  mounting. The size of check nut or flange is 11/4 " to 21/2 BSP.Electrical Data : In any voltage & wattage depending upon the surface area of heaters.Working Temperature : The temperature of immersion heater could go upto 600°C depending upon sheathed material & process application.

Water Immersion Heaters, MFB Burner, infrared ovens, tunnel ovens