Immersion Heaters Dealers in Mumbai

Indl. Oil Immersion Heater are commonly used in many chemical, petroleum and water based applications. Consisting normally of an ANSI rated flange with several hairpin elements or bugle tubular elements extending from the face of the flange, this electric heater uses direct heat application to the liquid medium.

We offer the broadest selection of stocked Flanged Immersion Heaters in the industry. Technical Specification: Available in 1000W240V singledual element Length of the Heater can be from 12" to 34" Length of the Heater can be from 11", 24", 27", 36" Available in 1000W, 3000W, 5000W, 240V single dual element

• Voltage: 12 - 440V
• Condition: New
• Heater Tube Dia: 8mm,9.5mm,10.5mm,12.5mm

• Type: Oil Immersion
• Material: Copper
• Shape: Round
• Certification: CE Certified
• Application: Industrial Use
• Voltage: 220V
• Power Source: Electric
• Phase: Single Phase
• Warranty: 1 Year

VERACIOUS Industrial Water Immersion Heaters are made of nickel plated copper tubing brazed to brass flanges and are provided with terminal covers for protection of terminals Applications : heating fuel oils, and in oil circulating pre-heaters, heat exchangers and similar equipment

Flanged Flameproof Immersion Heater The threaded flanged flameproof heaters are made from specially selected tube which ensures that heaters do not burst and damage the surroundings, the tubes are welded onto a forged flange which ensure leak proof structure. A robust flameproof terminal enclosure protects the electrical connections. The watts density of the element core fitted depends upon the media to be heated and the kilowatt rating required. Removable Flameproof Immersion Heater The range of flameproof core removable cartridge heaters offers a hazardous area heating solution for oil and similar applications where low heat density is required. The element can be withdrawn for inspection without system drain down. The standard heater consists of a single element core fitted into a mounting flange. A robust flameproof terminal enclosure protects the electrical connections. The watts density of the element core fitted depends upon the media to be heated and the kilowatt rating required. Features Certified Ex II A, IIB OR IIC FLP junction box Lightweight cast aluminum alloy terminal enclosure with weatherproof protection to IP65 Mounting of the heater can be by threaded boss or an industry standard flange, Can be supplied with the terminal box mounted away from the fixing boss / flange for high process temperatures, any electrical supply upto 440 v A choice of carbon steel, or AISI 316L stainless steel secured by either welding or seamless depending upon the process application Application Pre-heating of oil / water Processing equipment Cleaning and rinsing tanks Heat transfer systems Boiler equipment Frost protection Compressors Turbines

• Voltage: Upto 415 V
• Surface Temperature: 600OC Maximum

Plain tubular heaters are available in straight lengths or bent as per customers requirement with threaded stud connection at both ends. Finned tubular heaters have enlarged surface area to help faster dissipation of heat.

• Length -: 12" , 18" , 24" , 30" & 36"
• Capacity – Volts –: 240
• Watts –: 1000 to 4000
• Terminal wire length –: 1.5 Mtrs

APPLICATION To heat-up various acidic solutions where no metal withstands. Generally this heater is used in electroplating industries. The heater is operated vertically only.   CONSTRUCTION Sheathing–This type of heaters have quartz silica tube sheathing, closed from bottom. Rubber cap with terminal wires are mounted on the top. Heater terminals are fixed very firmly with the outer wires. It consist of non-sinkable heating element, as the heater is suitable for vertical installation only.     ADVANTAGE This heater is designed to heat-up the solutions rapidly as the same have more watt density than the rod type heater. This heater is also available with built in thermostat.

Delighting our customers with our excellent performance, we have cemented our status as a top figure in the industry. As a Manufacturer and Supplier, we proudly present Titanium Electroplating Immersion Heaters to our customers. We undergo a thorough process of vendor selection to procure raw materials only from the vendors who never fall short of delivering constant and excellent quality. Our industrial heaters are known for their suitable application in processing of industrial fluids. These are available in different sizes, shapes and heating configurations as per customers demand. Description : Industrial Heaters. In Titanium , SS 316 & 304, Glass Heaters , Lead ling Heaters. Industrial PT-100 Smiplex Sensors. In Titanium And SS Alloys.   For More Information Please Visit On : WWW.SAITITANIUM.IN

We are best manufactures for Immersion Heaters. Immersion Heater are made in Tubular and cartridge types. They can be manufactured with threaded bushings of flanges. Different sheath materials like stainless steel, Incoloy , Copper, Titanium are used depending on application requirements. Immersion heaters can be supplied with a vareity of diferent terminal enclosures like general purpose enclosure, Weather proof enclosure & Flameproof enclosure. Our company also offers a wide range of flanged immersion heaters, which provide appropriate heater size-to-application and fittings. These heaters solves purpose of various industrial needs. The flanged immersion heaters are perfectly designed to provide proper element spacing to maximize heater performance and the life.

Tubular elements used for heating liquids (corrosive and non-corrosive) are known as immersion heaters. For corrosive medium, sheath of the element can be enclosed in metallic or non-metalic Element casing made of special alloy can be used for longerlife of the element. Available in ranges of 1 KW to 4.5 KW with adaptor fittings 1" B.S.P to 21/2 " B.S.P threaded brass flanges duly nickel Chromium plated. Heaters high rating are available on request with flanged connections. The Photographs are those of water 7 oil immersion heaters simultaneously. Applications Air-conditioning Pharmaceutical Chemical Textile Nuclear and many more industries.

• Voltage: 230 V
• Phase: Single Phase
• Heater Material: Plastic And Mild Steel
• Size: 8inch(Length)
• Frequency: 50 Hz
• Power: 1000 W

• Voltage: 230
• Size: Depend
• Power(Watts): Depend

Uses : Ideal for most Alkaline cleaning solution, detergent & other caustic solutions, normally corrsive to mild steel can also be used to heat sulpheric acid of 70% concentration to 90°C.Construction : Alkaline heaters made out of 8.2 mm chrome, nickel, steel tube for mounting on side of vessels & for easy removal & cleaning fitted with a junction box for terminating the power line.Electrical Data : In any voltage & wattage depending upon the surface area of heaters & surrounding area in which heater is immersed.While Placing Order : Please mention diameter, length, wattage, voltage, lead wire length, special features if any.

We are among the reliable Manufacturers and Suppliers of Oil Immersion Heaters. The Oil Immersion Heaters are widely used for oil heating and oil circulating in systems that offer heat to oil jacketed kettles, plastic & chemicals processes, and other such equipment. Clients can avail Oil Immersion Heaters from us at very affordable prices. Specifications Steel tubular sheathed brazed to a C.I. flangeProvided with thermostat pocket, earthing terminals, & cap

Oil immersion heaters, As oil heating usually to be done at low watts surface area density. As casted finns provides high surface area to be in contact with oil and does not burn oil but heats up oil faster in small area,resulting in compact heating system.

Made out of 8.5mm dia titanium tube for mounting on side of vessels. Fitted with junction box for terminating the powerline the heaters are corrosion resistant for bright nickle dull nickle and chrome applications. For other solutions kindly suggest us details of acids concentration.

• Type: Water Immersion Heaters
• Application: Boiling Water Immersion
• Certification: CE Certified, ISO 9001:2008
• Color: Grey, White, Sliver
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic
• Warranty: 1year, 2years
• Energy source: Electric

• Material: SS
• Warranty: 1 Year
• Voltage: 250V
• Weight: 520gm
• Brand: Bajaj
• Power Consumption: 1kw
• Item Dimensions(LxWxH): 7x4.7x34cm
• Frequency: 60Hz

• Power: 500-1000 W
• Country of Origin: Made in India
• Voltage: Upto 600 V
• Tolerance: +- 10 %
• Frequency: 50 Hz
• Temperature: 500degF
• Heater Material: Ceramic
• Brand: Magma

Tubular elements used for heating liquids (corrosive and non-corrosive) are known as immersion heaters. For corrosive medium, sheath of the element can be enclosed in metallic or non-metalic Element casing made of special alloy can be used for longerlife of the element.Available in ranges of 1 KW to 4.5 KW with adaptor fittings 1" B.S.P to 212 " B.S.P threaded brass flanges duly nickel Chromium plated. Heaters high rating are available on request with flanged connections. The Photographs are those of water 7 oil immersion heaters simultaneously. Air-conditioning, Pharmaceutical.chemical, textile, nuclear and many more industries.

The easy and convenient and economical way of mounting medium size bearing is by using UNIQUE SPIRALELECTRICAL HEATER. Even today we find quiet a few outdated methods being followed and their shortcomings are beinghigh lighted over here. Use of naked flame for e.g. is risky and does not ensure uniform heating. If an oil bath is used it may  resultin dirt entering the bearing. Dripping of hot oil is not only hazardous but also messy. In fact they are against today’s ecologicalnorms Use of hammers or other pressing forces may damage the bearing and cut short its life. Thus the ideal solution for medium  sizebearing is to heat and mount by UNIQUE SPIRAL ELECTRICAL HEATER. They are eco friendly. EASY TO USE:• Connect the unit to the suitable electrical point• Mount the suitable coil at the center point. And switch on the unit.• Select the required temperature.• Place the bearing or the heating component on the centering support.• Press the start button.The spiral heater does the rest and will automatically switch off when the desired temperature is reached. Removethe heated job by the special hand gloves provided with unit and mount the same in placeFEATURES :The UNIQUE SPIRAL HEATER is supplied with heating coils of 1 KW and 75 KW. 1 KW coil is used for heating  bearingof bore size 55 mm to 100 mm. The 1.75 KW coil is used for heating the bearings of bore size 100 to 150 mm .. The heating coilscan be easily changed since they are just of plug in type. The unit ensures uniform heating through the centering support Thetemperature control sensor is in contact with the inner ring of the bearing. Once the set temperature is reached the same can beseen on the display panel and one can hear the audio alarm signaling the job has been heated. The unit is provided with a microswitch which switches off the current once the job is heated to the set temperature. This is an additional safety feature provided.Apart form bearing couplings, cams rings etc. can also be heated to an accuracy of +I- 2 deg C    

We specialize in the manufacture of high quality Immersion Heater.The Immersion Heater are specifically designed to heat different kinds of liquids. Made using high grade Stainless Steel,Copper and Incoloy pipes.These heaters are brazed to threaded flanges or nipples for immersion purpose.

Product Name : Immersion Rod Water HeaterProduct Code :IR 1412Features: Wattage : 1500 Watts ISI Marked Water Heater Shock Proof - No Electric Shock Water Proof

• Material: Iron
• Voltage: 230V
• Power: 3000kW
• Feature: Corrosion Resistance
• Frequency: 50Hz

• Material: Ceramic (Rod)
• Warranty: 2 Years
• Certification: ISI
• Voltage: 1500 V
• Features: Heavy Gauge Copper Pipe, Complete Brass parts Fitting, Silicone Treated MGO Powder, High Grade bakelite Connector.
• Brand: Excel
• Capacity(Litre): 20 Liter Per 15 min
• Power Consumption: 200 Watt
• Usage/Application: Home
• Packaging Type: Box

• Type: Water Immersion Heaters
• Application: Boiling Water Immersion
• Certification: CE Certified, ISO 9001:2008
• Color: Grey, Light White, White, Sliver
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Manual
• Warranty: 1year, 2years
• Energy source: Electric