Industrial Bellow Dealers in Santacruz East, Mumbai

Our pressure blowers are generally direct driven type, i.e. impeller is directly mounted on the shaft of standard TEFC 3 Phase electric motor, running at 2880 RPM. Our Combustion air blowers are fabricated from heavy gauge mild steel sheets and structural. The impeller is mostly of riveted construction and is carefully balanced, statically and dynamically to obtain a perfectly vibration free running. The impellers may be of M.S., and S.S. grade aluminum. The inlet to the blower is generally open to atmosphere but provided with safety cover. Easy removal of the impeller for maintenance purposes is facilitated by providing large inlet cover on the inlet side. Combustion blowers can also be supplied with �V� � Belt drive arrangement or drive through flexible coupling when required. Combustion or Pressure Blowers : These are generally direct driven type, i.e impeller is directly mounted on the shaft of standard TEFC 3 Phase electric motor, running at 2880 RPM, These blowers are mainly used for the following applications : For fuel firing : That is to supply requisite amount of air at constant pressure for the proper atomization and complete combustion of oil in the burners. To supply combustion air to foundry cupolas. Forced air cooling of products.Forced air conveying systems. Liquid agitation, etc. Vinayak�s combustion air blowers are fabricated from heavy gauge mild steel sheets and structural. The impeller is mostly of riveted construction and is carefully balanced, statically and dynamically to obtain a perfectly vibration free running. The impellers may be of M.S., and S.S. grade. Aluminum. The inlet to the blower is generally open to atmosphere but provided with safety cover. Easy removal of the impeller for maintenance purposes is facilitated by providing large inlet cover on the inlet side. Combustion blowers can also be supplied with �V� � Belt drive arrangement or drive through flexible coupling when required. Characteristic curves and standard range of our blowers : Vinayak�s combustion blowers are available from 1 to 200 H.P. with discharge capacities from 100 CFM to 12000 CFM (160 to 1000 m3/hr) and pressures from 4� to 64� SWG (100 to 18000 mm SWG). Properties : StrongRobustDurableCorrosion resistantAbrasion resistant Raw Materials Used : Heavy gauge mild steel sheetsStructural Steel sheets Product Features : Impeller is of riveted construction is carefully balancedStatically and dynamically to obtain a perfectly vibration free runningMade of M.S., and S.S. grade. aluminumThe inlet to the blower is generally open to atmosphereProvided with safety coverEasy removal of the impeller for maintenance purposesProvides large inlet cover on the inlet sideCombustion blowers can also be supplied with �V� � Belt drive Applications : Chemical & Pharma CompanyHotelsSteel Manufacturing IndustriesNon- Ferrous metal Manufacturing IndustriesAllied Industries

• Brand Name: Sol Bellows
• White Colour: Expansion Bellows
• QVF Bellows: ASA 150#

We are offering ptfe teflon bellowsdescription: bellows are specially designed from virgin ptfe and is contour moulded. This manufacturing method guarantees an excellent structure of the material; symptoms of ageing are practically excluded. Very long term durability and low maintenance cost are assured. The bellows can be used upto 260°c. Bellows serve for compensation of vibration, thermal strain expansion and axial & redial motion. These bellows are meant for resisting highly corrosive plants and piping for aggressive medias. These bellows are installed in ptfe lined carbon steel piping and equipment without additional gaskets. For use with piping and equipment made of glass, enamels and ceramics we recommend ptfe gaskets, offered as accessory. The sealing surfaces are covered end plates and individually boxed for protection against mechanical damage. Limit bolts are preset to prevent over extension during operation.   size: bellows are manufacturing in different sizes from nb 25mm to nb 300mm. The standard length is 67.5mm long.   general ptfe properties chemical resistance ptfe is resistant to virtually all chemicals, even at very high temperature and pressures. It is only affected under certain conditions by elementary fluorine, strong fluorinating agents (such as chlorine trifluoride) and molten alkali metals (such as metals sodium). temperature resistance: ptfe components can be used at temperatures ranging from approximately -200oc to +260oc electric insulator: ptfe has excellent electric properties which remain constant independent of frequency and temperature. coefficient of friction: ptfe has the lowest coefficient of friction of all solid materials anti-stick effect: ptfe is an anti-adhesive, i.e. Other materials do not adhere to ptfe no health hazard:   ptfe can be safely used upto temperatures of +260oc (does not apply to all fillers).

SIZE RANGE: 1” – 12” Bellows are made of pure virgin paste extruded PTFE. They serve for the compensation of vibrations. Available in 2 / 3 / 5 convolutions. PTFE tubes have a low level of crystallinity which confers an improved flex life. Seamless PTFE tubes has controlled wall thickness ensuring optimum hoop strength and excellent pressure/vacuum versus temperature relationship in finished bellow. End fittings have flanges of material IS 2062Gr. B, tapped as per ANSI / DIN standards. Other standards and materials can be accommodated. Expansion joints are also fitted with stainless steel support rinds and limit bolts with lock nuts. ADVANTAGES: Compensation for axial, parallel and angular movements Sound and vibration absorption and insulation. Electrical insulation. Universal chemical resistance Resistance to vapor permeation Long life with low maintenance Good high and low temperature performance Excellent anti-stick characteristics.   Dimensional details are as per below table

• Brand Name: Globus
• Voltage: 240V
• Air Volume: 4.5 cubic meter per minute
• Model Name/Number: GBC 40
• Power Consumption: 600 Watt
• No Load Speed: 6000 to 16000 RPM
• Frequency: 50 Hz
• Phase: 3 Phase

• Blower Type: Centrifugal Blower
• Body Material: Steel
• Pressure: High Pressure
• Power Source: Electric Blower
• Blade Material: Cast Iron
• Electric Current Type: AC

tri lobe blowers

• Brand Name: Globus
• Voltage: 240V
• 80mm Dia X 500mm Length: 100mm Dia X 500mm Length
• Air Volume: 4.5 cubic meter per minute
• Model Name/Number: GBC 40
• Power Consumption: 600 Watt
• No Load Speed: 6000 to 16000 RPM
• Frequency: 50 Hz
• Phase: 3 Phase

Electric Circuit Breaker, Oil Skimmer Filter, Dosing Pump

door gaskets, Rubber Washer

PVC Leather Cloth

Hdpe Tanks, lab glass ware, Laboratory Porcelain Ware, Scrubber

air pollution control equipments, fabric filters, Packed Bed Scrubber

Industrial Blowers

cordless impact drivers, Circular Saws, chain saws, portable power tools

aluminium socket, fuel tank cover, Driver Cabin Door Locks