Industrial Control System Dealers in Mankhurd, Mumbai

Keeping in mind shipping and handling factors, we ensure our products are packed using industrial grade materials. Furthermore, we provide customized packaging solutions. Our team members help us completely to deliver exceptional range of products that is in conformance with the standards.

We are plc panel. Plc panel with desk & hmi unit automated panel for hydraulic system.

• System Voltage: 440 - 525 V/850 V
• Filter tuned to: 5th, 7th, 11th, 13th
•  : Rated KVAR

The basic purpose of Contactor Switched Automatic Harmonic Filter Panel is centralized Reactive Power Compensation with Harmonic Mitigation. Automatic control is provided using Automatic Power Factor Control relays. The switching of individual steps is through contactors or thyristors. With thyristor switching it is possible to have panels at higher voltages (upto 690 V), and with large size of single step (108-kVAR). Based on the load variation pattern, the minimum and maximum size of steps can be determined to maintain optimum power factor. These will help partly mitigate the harmonics from the system.

Control Panel

We are supported by an advanced packaging system and make use of only high quality packing materials for ensuring complete safety during handling, warehousing and transit. Buyers prefer us for our practice of delivering the orders within the pre-decided time frame.

• System Components: Smoke Detectors, Fire Alarm Control Panel
• Installation Service: Yes
• Configuration: Control Panel with optional zones from 2 to 8
• Operating Voltage: 230V AC 50Hz
• Dimension: 305mm X 225mm X 85mm
• Weight: 2.5 kg
• Mounting: Wall

Features of Control Panel : In-built software to sense, receive and recognize the signals sent by the sensors During any abnormal condition or malfunction, an alarm is activated that has to be acknowledged physically and reset Available in 2 to 8 zone (areas) options SMPS power supply Software provided for monitoring and report generation and events logging LED's for individual ZONES to indicate status of respective zones Relay outputs provided for individual Zones Relay output activates in Short / Alarm condition of respective zone Relay output for hooter gets activated, when Short / Alarm condition occurs in any sensors Mute switch provided for silencing the hooter Limit switch for sensing door status (i.e. Open / Close) provided A Buzzer which beeps with hooter in Short / Alarm and Open Panel Door conditions is provided. Here, the buzzer cannot be silenced through Mute key Communication : RS485 serial port at eight baud-rate speed setting (Default 9600 bps) for interfacing with Master (PLC, PC) Optional Potential free outputs for all zones Modbus RTU interface to communicate with BMS System Display : 4x20 LCD for displaying status of all Zones LED Display status for all zones ConvertorRS 485 to RS 232 convertor available at extra costModelsAvailable in 2 Zone to 8 Zone options

• Type: Energy Saver Panels
• Weight: 4-5kg
• Color: Available In Many Colors
• Voltage: 220V
• Output Type: AC Single Phase, AC Three Phase
• Frequency: 50hz
• Feature: Easy Operate, Stable Performance
• Warrenty: 2years
• Automation Grade: Automatic

Production flexibility Easy coating scale-up Interchangeable drums Fully perforated drum Aqueous and solvent designs Anti-bearding spray nozzles Automated control system User friendly operator panel Coating pan lifter available Coating pan rack available

neon has full-fledged expertise in solving problems related to electrical energy management. neon product are dedicated to the betterment of utilization of electrical energy. We have vast experience in the installation and commissioning of automatic power factor control system based on your controllers and allied products. We offer our experience based on this experience to you by way of providing problems of energy management related to power factor improvement..What is Power Factor(P.F.)?Power Factor (P.F.)is the ratio of active power to apparent power-i.e P.F.=KW/KVA Power Factor is the – so – to say efficiency of utilization of electrical power. It is obvious that KW =KVA X P.F. Thus for a given voltage and active power (KW), the current drawn is inversely proportional to the power factor.

Control panel Suitable for two speed motors well as for VVVF drive can be manufactured as per customer’s designs. 

• Type: Fire Alarm Control Panel
• Autoamatic Grade: Automatic

• Phase: Single, Three
• Voltage: 380 - 440 V
• Material: MS
• Rated Reactive Power: 10 to 200 kVAR
• Meter Type: Analog
• Surface Finish: Powder Coated
• Frequency: 50 - 60 Hz

• Phase: 3 Phase
• Automation Grade: Automatic
• Degree of Protection: IP54
• Operating Voltage: 415V
• Rated Current: 1000 Amp
• Body Material: MS
• Mount Type: Wall Mounted
• Power Source: Electric
• Surface Finishing: Paint Coated

• Thickness: 6mm, 8mm, 12mm, 18mm
• Size: 2440mm x 1220mm

Wood Plastic Composite Board is Environment Friendly product and is made from recycled plastic and wood scraps resembles wood. The plastic protects the wood fibres from decay and decomposition whiles the wood fibers. In addition, Wood plastic composites have a greater resistance against splintering making them perfect for high traffic areas.

• Application: Power Electronics , Induction Melting & Heating Furnaces , Telecom & Lighting , Medical Electronics , Energy Meters ,EMS.

Mika has been pioneers in manufacturing of Control Panels since 1990. We are one of the leading manufacturers of Control Panels. We are engaged in this activity since 1986 and manufacture MCCs, PCCsDBs, MIMIC, MIMIC PANELS, INSTRUMENTATION PANELS, PROCESS CONTROL. PANELS, PLCs, FEEDER PILLARS, ETC. As an established name for Control Panel Manufacturer we have our regular supplies to Railways, L&T, BHEL,PGCIL, Andritz, Siemens,Jyoti to name a few. Mika panels are tested for degree of protection test ,Short circuit test,  temp rise test. All these testing is carried out at NABL labs.   Our panels are tested for IP-55 and IP-54 degree of protection test as per IS 2147 at MIs. Genelac Limited who have the necessary testing facilities. Our panels are also tested For humidity test at E.R.T.L.(W) for testing the quality of paint and painting process. The panels are also tested for short circuit test of 50 KA.(RMS). for 1 sec. at C.P.R.I.Bhopal.   We have complete manufacturing facility such as fabrication shop equipped with complete fabrication machinery, tools and dies required for fabrication, 7 tank painting process plant, wiring assembly and testing facility.   Motor control centers   Power control centers   Distribution boards   Instrumentation panels   Process control panels   Programable logic control panels   Mimic panels   Bus ducts

Ultra Servo Sachet Machine with Servo Auger Filler for Powders like Turmeric Powder, Flours, Talcum Powder, Ground Spices, and almost any fine powder.

Solar panel is the most convenient and green means of generating electricity using solar energy.We offer panels ranging from 3 Wp to 310 Wp.We provide the perfect solution for electricity generation from sunlight in an efficient and environment friendly manner by means of Solar PV Modules. Features:- High efficiency pid free mono / poly crystalline silicon solar cells. 6V, 12V, and 24V Modules available in wide range of wattages. Highly resistant to rain, water, abrasion and hail impact. Anodized aluminum frame with pre-drilled mounting holes. High impact resistant, toughened glass. High quality, dust and water proof junction box. Customised sizes / design & specifications also undertaken.