Industrial Control System Dealers in Mulund, Mumbai

We lay special emphasis on the packaging so as to ensure damage-free deliveries. For this, we make use of high quality material for wrapping our products. We are associated with renowned transportation providers to ensure delivery of consignments is carried out without a glitch and in a timely manner.

Control panel Suitable for two speed motors well as for VVVF drive can be manufactured as per customer’s designs. 

• System Components: Smoke Detectors, Fire Alarm Control Panel
• Installation Service: Yes
• Configuration: Control Panel with optional zones from 2 to 8
• Operating Voltage: 230V AC 50Hz
• Dimension: 305mm X 225mm X 85mm
• Weight: 2.5 kg
• Mounting: Wall

Features of Control Panel : In-built software to sense, receive and recognize the signals sent by the sensors During any abnormal condition or malfunction, an alarm is activated that has to be acknowledged physically and reset Available in 2 to 8 zone (areas) options SMPS power supply Software provided for monitoring and report generation and events logging LED's for individual ZONES to indicate status of respective zones Relay outputs provided for individual Zones Relay output activates in Short / Alarm condition of respective zone Relay output for hooter gets activated, when Short / Alarm condition occurs in any sensors Mute switch provided for silencing the hooter Limit switch for sensing door status (i.e. Open / Close) provided A Buzzer which beeps with hooter in Short / Alarm and Open Panel Door conditions is provided. Here, the buzzer cannot be silenced through Mute key Communication : RS485 serial port at eight baud-rate speed setting (Default 9600 bps) for interfacing with Master (PLC, PC) Optional Potential free outputs for all zones Modbus RTU interface to communicate with BMS System Display : 4x20 LCD for displaying status of all Zones LED Display status for all zones ConvertorRS 485 to RS 232 convertor available at extra costModelsAvailable in 2 Zone to 8 Zone options

• System Voltage: 440 - 525 V/850 V
• Filter tuned to: 5th, 7th, 11th, 13th
•  : Rated KVAR

The basic purpose of Contactor Switched Automatic Harmonic Filter Panel is centralized Reactive Power Compensation with Harmonic Mitigation. Automatic control is provided using Automatic Power Factor Control relays. The switching of individual steps is through contactors or thyristors. With thyristor switching it is possible to have panels at higher voltages (upto 690 V), and with large size of single step (108-kVAR). Based on the load variation pattern, the minimum and maximum size of steps can be determined to maintain optimum power factor. These will help partly mitigate the harmonics from the system.

• Phase: 3 Phase
• Automation Grade: Automatic
• Degree of Protection: IP54
• Operating Voltage: 415V
• Rated Current: 1000 Amp
• Body Material: MS
• Mount Type: Wall Mounted
• Power Source: Electric
• Surface Finishing: Paint Coated

We are working with a pool of professionals who are diligent at their work and make sure that the offered lot is packed in high quality material and timely dispatched. Purchasers can rest secure; our entire range is premium, as they are wholesaled by us after subjecting them to a string of quality control tests.

We are plc panel. Plc panel with desk & hmi unit automated panel for hydraulic system.

Solar panel is the most convenient and green means of generating electricity using solar energy.We offer panels ranging from 3 Wp to 310 Wp.We provide the perfect solution for electricity generation from sunlight in an efficient and environment friendly manner by means of Solar PV Modules. Features:- High efficiency pid free mono / poly crystalline silicon solar cells. 6V, 12V, and 24V Modules available in wide range of wattages. Highly resistant to rain, water, abrasion and hail impact. Anodized aluminum frame with pre-drilled mounting holes. High impact resistant, toughened glass. High quality, dust and water proof junction box. Customised sizes / design & specifications also undertaken.

• Rated Current: 1500 A
• Rated Voltage: 415V
• Degree of Protection: IP 52
• Operating Voltage: 415
• Number of Poles: 4 Pole
• Frequency: 50

We bring forth for our clients an extensive range of surgeon control panel is convenient for the doctors and nurses to control temperature, humidity, medical gases, lights, etc. the offered control panel is also integrated with broadcasting and intercom / telephony system for the ease of surgeons. This microprocessor based Surgeon Control panel is designed with advanced technology and supreme quality components, which ensures its excellent performance and longer service life.

TYPE AC & DC Distribution Boards MCC & PCC LDB & PDB DG Protection, Synchronising Panels, AMF Panel Metering Panel Custom built Distribution, Instrumentation & Protection Panels FEATURES Single front, Double front, Fixed type, Semi draw-out type, Fully draw-out type, Fully isolated Vertical & Horizontal busbar chamber Fully isolated cable chamber Manufactured out of CRCA sheets Floor mounting, free standing, Vermin & dust proof Powder coated with 7 tank pretreatment Degree of protection upto IP55,Short circuit withstand strength up-to 50KA PLC based AUTOMATION Panels with MMI Mass-Tech offers PLC based total solution to your Automation needs.The scope covers system engineering, selection of optimum hardware, programming, designing MMI screens and plant specific database, reports generation. In-house trial & site commissioning is also supported. Mass-Tech also offers PLC based systems for DG control and synchronisation, Conveyor systems such as Ash handling system, Building automation including control of AHU, lighting, water treatment units, parking etc. RATING 440V AC, 220V DC upto 5000A, Customize as per requirement

The company has cemented its presence among the eminent Suppliers of Control Panel Board. The boards offered by us include pump control panel board, automation panel, distribution board etc. Low maintenance, long life, smooth functioning and reliability are some of the attributes of our boards. Buyers are free to place bulk orders of the boards with us and we ensure their timely execution within the promised timeframe. Details: Pump Control Panel Board is an ideal choice for both monoblock and submersible pumps. They offer protection from short circuit and overloading. The metal box is CRC sheet powder coated. Various features comprise of – digital ammeter, digital voltmeter, overload protection, under load protection, auto manual switch. The indicating lamp is of LED type and there is a push button for ON/OFF.

We also make Electric Control Panels/ Distribution Panels based on the customers’ specifications. We manufacture up to 1600 Amps main distribution control panels.

• Power: 415V
• Material: MS
• Country of Origin: Made in India
• Brand: KINCO
• Operating Voltage: 415V
• Frequency: 50H
• Output Voltage: 415V

We have established ourselves as the prominent manufacturer, exporter and supplier of the premium quality Electrical Control Panel that is especially designed by our experts as per the needs of the customers. Our Electrical Control Panel is widely used in various industries in all the major parts of the world. Features DurableReliable resultsRequires minimum maintenance Known for Preventing the leakage of current flowing through itEnsuring the safety of the user

An electrical panel is also called a load center. It is a metal electrical service box that accepts the main power to the home/office/service area and distributes electrical current to the various circuits within the Home/office/ Service area. Also known as: Load Center, Service Panel, Breaker Panel, Fuse Box.The distribution of power to the various circuits is protected from over-current by the use of circuit breakers or fuses. These Electrical Control Panels are widely used in different places such as Telecom sector, Oil & Gas sector, Power Sector and others as per the need of the clients. Our offered panels are available in various specifications in order to attain maximum clients' satisfaction. Moreover, these panels are delivered to the clients at reasonable rates. Sicom Sales & Engineering is a team of qualified dedicated engineering professionals having a rich experience in the field of power electronics. The company firmly believes in delivering total customer satisfaction spanning from concept todesign, commissioning to after sales service. We offers fully engineered & cost effective solutions for process Automation & controls , integrating Digital DC Drives, PLC with networking & interfacing with process computers/ HMi’s.

neon has full-fledged expertise in solving problems related to electrical energy management. neon product are dedicated to the betterment of utilization of electrical energy. We have vast experience in the installation and commissioning of automatic power factor control system based on your controllers and allied products. We offer our experience based on this experience to you by way of providing problems of energy management related to power factor improvement..What is Power Factor(P.F.)?Power Factor (P.F.)is the ratio of active power to apparent power-i.e P.F.=KW/KVA Power Factor is the – so – to say efficiency of utilization of electrical power. It is obvious that KW =KVA X P.F. Thus for a given voltage and active power (KW), the current drawn is inversely proportional to the power factor.

• Phase: Single, Three
• Voltage: 380 - 440 V
• Material: MS
• Rated Reactive Power: 10 to 200 kVAR
• Meter Type: Analog
• Surface Finish: Powder Coated
• Frequency: 50 - 60 Hz