Industrial Control System Dealers in Vile Parle, Mumbai

• Application: Production/ Lab

technical specifications   1) dimmer controlled variable line voltage. the test panel in dynamic mode feeds dimmer controlled variable voltage, upto the rated load current and gives indication of voltage, current, wattage & frequency on individual digital indicators.   2) temperature measurement. digital temperature indicator with suitable sensor for the specific application for the measurement of temperature upto 1200 °c.   3) rpm measurement. digital rpm indicator along with sensor suitable for the application for the measurement of speed upto 9,999 rpm./30,000 rpm   4) high voltage breakdown. useful for the measurement of breakdown voltage of the appliance under test. test voltages available are 0-3kv/5kv.30/100ma. indication of the test voltage & test voltage & test current are provided on digital indicators   5) earth contact resistance test. e c r tester feed 0-30 amps continuously adjustable current through the earthing line & thereby gives the value of earth contact resistance.   6) insulation test. digital insulation tester applies 500 v d c across the measurement terminals and displays the value of insulation.   7) digital leakage current test. digital leakage current tester suitable for measuring the leakage current from line or neutral to the body of an appliance under test.   8) resistance test. digital ohm meter with four wire measurement system allows accurate & precise resistance measurement   9) life endurance test. depending on the type of appliance can be provided which will keep the item under test on for the desired adjustable duration & off for the desired adjustable duration. digital counter counts on/off cycles

• Type: Data Acquisition System
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 0-100W
• Driven Type: Electric

Panel Switch Distribution Board Accessories: Din Rail Channels & End Clamps, Bus Bar Supports, Door Hinges, Locks, Keys, Handles, Fans & Filters, Document Holders, Neutral Links, Neutral Link Base, PVC Trunkings, Spacers, Grommets Closers, Porcelain Connectors Etc.

This is a replacement of Flame Proof Panel with Constant Air Pressure inside. This is used for Extreme Inflammable area like Refineries.

• Type: Solar Panel
• Certification: CE Certified
• Application: Industrial, Toproof
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power Source: Solar
• Warranty: 1Year
• Solar power: 1Kw, 250W, 500W, 750W

We are the leading Manufacturer and Supplier of efficient Fire Alarm Control Panel. The Fire Alarm Control Panel is the Central Monitoring Station where all signals are received and transmitted. It is important that the person responsible for taking action, should know exactly where and what the problem is, as soon as he receives a signal from the panel, given below are the details of how to interpret the various lights and switches on the panel fascia.

• Minimum Order Quantity: 50 Unit
• Lighting Type: LED
• Type of Lighting Application: Indoor lighting

The LiveLink starter kit consists of the LiveLink control box, the IR Quattro HD LiveLink presence detector and the DALI 4x switch coupler for use in large rooms, such as classrooms or conference rooms. The system is configured and started up using the LiveLink app and can be controlled very easily via tablet or smartphone. LiveLink control box: The control unit has a DALI interface and can be controlled via tablet, smartphone or switch. It can operate up to 16 light groups and 64 individual components. An integrated, autonomous Wi-Fi network provides optimum connection and security. LiveLink switch coupler: The LiveLink switch coupler provides the capability of integrating up to 4 standard switches into the the LiveLink system. It can be installed simply behind the switches in the concealed box. Saved lighting scenarios can be assigned to individual buttons, making them available for selection in everyday use at the "press of a button". IR Quattro HD LiveLink presence detector: The LiveLink system's sensory organ, the IR Quattro HD LiveLink presence detector with 360° infrared sensor. With a unique square detection footprint and 4,800 switching zones, it detects the smallest of movements over 64 sq.m and is ideal for offices and conference rooms.EAN Code  4007841033958 Additional Information: Item Code: 4007841033958 Pay Mode Terms: T/T (Bank Transfer)    

• Brand Name: A.d's
• Condition: New
• External Body Size: 9.5 Inch (w) X 5 Inch (h) X 12 Inch
• Electrical Input: 230 Vac/ 50 Hz, with Proper Earthing.
• Memory: All Settings Used in Earlier Session is Stored & Displayed When Machine is Switched On Again
• Cuffs: 5 Numbers Silicon Cuffs

Salient features:- 1)     1MMHg controlling (resolution) 2)     Single & dual cuff tourniquets are available for all surgeries. 3)     Very reliable controlling system is used for perfect pressure. 4)     Rugged compressor. 5)     User friendly interface. 6)     Feathers touch keys. 7)     Very bright indicators. 8)   Highly stable & compact power supply, hence machine Can be used   anywhere, where voltage fluctuations are more. 9)     Inbuilt memory to store earlier settings. 10) Air leakage indicator to show air leakage in the cuffs & tubes. 11) Gradual pressure settings & gradual release system. 12) Online increase & decrease of pressure, timer, exhaust. 13) Beep after each 15minuts. 14) After presetted time is complete 1 minute extra time count is provided. 15) On completion of total sited time buzzer beeps continuously but pressure will be maintained at the same level, also it will not be released. 16) Cuff pressure will not be released on power failure. 17) Can be used with inverter power supply & generator. 18) Both hardware & software based exhaust available. 19) We provide 5 numbers of silicon cuffs (life time guarantee on joins) with machine. 20) Light weight machine, easy to carry anywhere. 21) Low power consumption. 22) Can be used for all types of patients (any physical condition) 23) Lowest risk to patient when compared with other machines. Technical specifications:- 1)     Settable pressure range 50mmhg to 650mmhg in steps of 10mmhg.   2) On line setting allows online settings of cuff pressure, timer & exhaust. 3) Pressure resolution 1mmhg.   4) Timer safe mode 1 minute to 6 hours in 15 minutes steps.   5) Alarms beep after each 15 minutes, total time out, exhaust mode, &    air leakage mode.Operating modes visual indications:-   A:-air leakage in either cuffs or in the tubes.   O:-operating mode (normal operating)   T:-timer mode.   S:-setting of cuff pressure mode.   E:-exhaust mode. (Software or hardware)  

• Type: Industrial Control Panel
• Color: Grey, White
• Application: industrial
• Material: Mild Steel
• Power Source: Electric

We are a professionally managed organization which is wholeheartedly engaged in the exporting of different types of industrial control panel. Our electric control panel is considered as the picture-perfect example of modern engineering because it works impeccable with the least consumption of electric power. We are one of the well-known temperature control panel exporters, located in India. We have immense experience in dealing with wide gamut of industrial control panel, electric control panel, temperature control panel etc. We never compromise with the quality of our product. The range of control panels offered by us include temperature control panels, motor control center, control panels for eot cranes and furnaces.

• Application: Automobile
• Phase: Three Phase
• Material: Mild Steel
• Frequency: 50/60Hz

We are backed by a team of industry professional which manufactures customized Glow Sign Boards that find wide application in many areas such as shopping malls, highways, restaurants etc. Available in tailor made options as desired by the client. Our graceful varieties of Glow Signs are highly admired in the market for their superior quality and finishing. Our products are designed by our experts using best technology. We provide ample options of fonts and designs to meet the best demands of the market. These signs are widely supplied to various commercial clients’ at the most attractive price range.

Get in touch with us for acquiring excellent quality Elevator Control Panel at the most desirable prices in the market. Our Control Panel is fabricated using high-grade stainless steel ensuring long working life. We can make available Control Panel with Emergency Light, Fan Switch, Attendant Key Switch and many more. Our Elevator Control Panel is available at the best prices in the market.     Control Features / Indicators   Car Call Registration Indicators Digital Position Indicator Up/Down direction Indicator Car Pre announcing LED indicators Start, Stop, Non stop, Buttons Door open /close buttons (for Autodoors) Emergency light Emergency Bell button Overload Indicator (Optional) Attendant Key Switch Fan Switch    

We are highly specialized in manufacturing of the APFC Panels. The power factor controller of our APFC Panels monitors the reactive power which inturn helps in saving energy. APFC Panels are available with capacitors which have built in protective devices for cutting extra power. APFC Panels manufactured by us are in accordance of requite norms and standards. APFC Panel features: Our APFC Panel is made from rust proof steel material Circuits are equipped with independent fuses in our APFC Panels APFC Panels are equipped with capacitors with series reactors for minimizing harmonic current which may alter system voltage & current APFC Panels have the following uses and applications: Micro processors LT & HT factories Electrical installations Analyzing line voltage Process controllers

Lighting control systems are intelligent network-based lighting control solutions and are often called Smart Lighting. These incorporate communication between various system inputs and outputs related to lighting control with the use of one or more central computing devices. Lighting control systems are widely used for both indoor and outdoor lighting for commercial, industrial, and residential spaces. Actis provides different lighting control systems that range from simple dimmers to complete lighting computer systems that provide multi-zone control over several ranges of light. These systems are a popular choice among home builders and home theatre designers alike. Lighting control is an important aspect of home automation, with the latter also incorporating HVAC and control over every aspect of your home theatre system.

While climbing on the success ladder, it has become increasingly important for us to deliver precisely tested and high grade assortment of Automation Control Panel. The offered panel is manufactured utilizing optimum quality material and contemporary machines in compliance with set industrial standards. This panel is used control and monitor instruments in different industries. Features: Heat resistance Precisely engineered Low maintenance

MCC Technical Specifications: Rated Service Voltage : 415 V  Rated Frequency : 50 Hz  Rated Insulation Voltage : 660 V  Rated Current (maximum) : 4000 A  Busbar Fault Level : 50 kA withstand (for 1 sec) 105 kA (Peak) Busbar System : TP-E or TPN-E   Degree of Protection: IP 54 AS PER IS 2147 Fully Compartmentalised:   Separate chambers for: Main Horizontal Busbars Droppers Control bus Feeder compartments Cables   Versions: Single front Double front   Overall Dimensions (mm):   S.F / D.F Width 800 / 800 Height 2375, 2475 Depth 600 / 900   Maintenance Features: Elecmech D/o MCC Panels are designed to be maintenance free. Telescopic Rails & Racking Screw   Positive guidance by Proven Rack and Screw arrangement Smooth movement of the module.  Perfect alignment of contacts. No Banging of Busbars on insertion of modules.  Eliminates the need to remove the module for routine checks / minor modifications.    All identical drawout units are fully interchangeable thus minimizing downtime. Vertical T droppers minimizes the number of joints thus reducing heat losses and the number of joints to maintained. Tin-Copper Electroplated Aluminum T section Vertical Bus ensures that there is no direct Copper to Aluminum contact, ensuring no corrosion due to Cu to Al joint T Eletroplating of the T dropper elliminates additional Cop-al joint.   Facility for Padlocking: Module in service and test position Power switches   Drawout feeder door: Indicating lamps, push buttons, meters and selector switches are mounted on drawout feeder’s door. This door can be hinged out for inspection / maintenance of the connections. Only the d/o fdr door needs to be changed in case of change in specified control equipment.   Design Features:   Fully drawout module with 3 Service, Test & Isolated positions Service: Power & Control contacts engaged. Test: Control circuits can be tested. Power contacts disconnected. Isolated: Both power and control contacts disengaged. Access internal components without removing the module. Maintenance: Can be withdrawn for routine maintenance. Silver plated drawout Contacts: Drawout power contacts are of Silver plated copper. They offer high resistance to abrasion, lower mV drop, leading to lower wear and tear and longer life of the contacts Programmable Sliding Contacts: Depending on logic requirements, programmed sliding contacts are used to permit selective signals during service, test position or to operate in both service and test positions.   Cable Alley: The MCC is provided with large cabling area. The cable chamber width is 250 mm internally. Aluminium cables can therefore be easily accommodated and terminated.   Both top or bottom cable entry is possible.  Gasket and Door lock: Standard panels are provided with captive screws / Quarter turn knobs. However customized Panels can be provided with Alphabetical Key lockable doors to prevent un-authorized access to the cable alley. The cable alley doors are removable type. They are provided with Spring Loaded Quarter-turn locks operable by a special key or with quarter turn knobs.   Dimensions: Height: 2375. Width : 550+250=800 mm Depth : Single front: 600 mm (base frame), 622 mm with front door Depth: double front 900 mm (base frame), 944 mm with front and rear doors   Module Design:  Module size: Module size ranges from 1/8th to 1/2 in multiples of 75 mm.  225mm Module can accomodate: Switchfuse feeders & MCCB upto 63A 1/6th Modules accommodate DOL Starters upto 18.5 kW Spring Loaded position lock  Variety of Feeders  Larger Starters DOL / SD starter upto 160 kW are accommodated in a combination of feeders such as ½ (900 mm) for contactors and OL relays + 1/4th for SFU (450mm) Incomers can be Switch-fuse upto 800 A or ACB upto 1600 A   Auxiliary Busbars: Upto 6 Sets control busses can be accommodated in the control bus chamber.   Safety Features: Busbars and droppers are provided with heat shrunk PVC sleeving. The heat curing process ensures no voids or pinholes. Except at the Joints and Vertical dropper contact plates, the busbars are completely covered with insulating material. Sleeving also protects busbars against accidental contacts with hardware, tools and vermin. 'Click-fit' joint shrouds are provided to cover tap-offs and fish-plate joints. Thus there are very few possibilities of short circuit between phase and neutral or earth in the busbar chamber. The heat shrunk PVC Sleeving is provided in addition to the large clearances in the busbar zone.   Merits: Secondary insulation protects against accidental contact with hardware, tools and vermin.  Restricts the arc, in case of a fault, to the zone of initiation.    Busbar Supports: Busbar supports are of SMC. This material has higher mechanical strength compared to conventional support material.   Safety Shutters:  Gravity operated safety shutters block access to the Vertical live T-droppers when the module is withdrawn from the service position.   Scraping Earth System: Tinned Copper contacts on the fixed partition plate and d/o trolley ensures perfect earthing of d/o modules   Safety: Operator safety is ensured by:  Distinct vertical earth bar of full length for each panel front.  Tinned Cu plated scraping earth contact on each drawout module of 'Make-first' and   'Break-last' type.  All doors are individually earthed.   Other MCC features ` Elecmech Motor Control Centre is a free-standing and floor mounting type switchboard available both in single front and double front versions, suitable for indoor installation. To facilitate transportation, the MCC is split into multiple sections. Each section is wrapped in an HDPE cover and packed in a wooden crate case.  To arrive at the approximate overall dimensions of the packing cases, add 300mm to the dimensions of the packing cases, add 300mm to the dimensions of the respective section.  Each vertical panel is divided into distinct zones for busbars, feeders, power cabling and control busbars. Horizontal busbars (HBB) are located at the top of the panels. The phase sequence, from rear to front, is N-R-Y-B. Where the number of bars per phase exceeds two, the HBB is split into two packets per phase. The phase sequence is N-R1-Y1-B1-R2-Y2-B2 from rear to front.  The droppers are located behind the module chamber and isolated from the unit compartment with an insulating barrier. The phase sequence, as seen from front left to right, is R-Y-B-N. Click-fit Busbar joint shrouds can be provided on the HBB for complete insulation. Shrouds can be easily removed for tightening the joints.  Control bus, are located in the top-front chamber of the panel. In the double front MCCs, auxiliary busbars are placed in one of the fronts, and tap-offs are taken for feeders in both the fronts. The incoming power contacts are located on the right hand side, while the outgoing power contacts are located on the right hand side rear.  The starter unit in the fully drawout version has the following positions:  Connected (service) position Test position Disconnected (isolated) position The connected/test/disconnected positions are indicated by matching red lines on the bottom tray of the compartment and the red arrow mounted on the withdrawable unit. The control contacts, i.e. the Secondary Isolating Contacts (SICs) are mounted in 2 columns on the drawout module. The rear column comprises SIC making in “Service” position. The front column can have the following varieties of SICs:  Service + Test Test only Service only For 225 and 300mm units, SICs can be located on LHS also. Such control terminals are duplicated in the cable alley. Wiring from the LHS SICs to the fixed terminals is factory-assembled and routed through a PVC duct mounted on the bottom side of upper tray for respective unit For 450 to 900 mm units. SIC are located on the right hand side only.

PCC & MCC Panels, Motor Control Panels, Drive Panels, Changeover Panels, D.G. Set Control Panels, Auto Sychronising & AMF Panels, PLC & SCADA Based Panels.