Industrial Cooling Systems Dealers in Mumbai

Designed for equipment cooling needs with in-built electronics , water pump and heat exchanger unit. Highly reliable components and design to ensure your critical equipment cooling needs are taken care off. Our compact range can fit to variety of industrial needs like pharma, medical ,engineering , textile machine. Process chillers are used for cooling water , glycol or oil as required for applications specific. Applications CNC machine Pharma industries Medical equipment Textile machineries Process industries EK15-W EK30-W EK90-W EK150-W EK250-W EK350-WFeaturesRobust design G1 housing with powder coating Environmental friendly refrigent Fully programmable micro-controller Fail safe design Applications Spindle oil cooling Die water cooling EDM wire cutting machine Ultrasonic machine punching and sharing MC CT scanner Scientific equipment.

Industrial Refrigeration offers Chilled Water System for food, pharma, & chemical industries. IRPL manufactures Water Cooled Screw Chillers incorporating reliable screw compressors from Bitzer (Germany) and Frascold (Italy). These chillers are fully Microprocessor based suitable for process cooling applications from (+) 20˚C up to (-) 40˚C. For lower temperatures of up to (-) 50C look into Brine Chillers. These screw chillers are offered with up to 2 Nos. screw compressors in one machine but having separate and individual refrigeration circuits. These chillers are world class, manufactured in an ISO 9001, certified factory with an option of using CFC free refrigerants R-407C & R-134a complete with in-built Process pump and stainless steel chilled water expansion tank. These chillers are also rated for an ambient of up to (+) 50˚C and cooling tower water temperature up to (+) 37˚C at the inlet of the condenser. The various operating voltages of these chillers are: a) 380 / 400 Volt AC / 50 HZ b) 460 Volt AC / 50 HZ c) 380 Volt AC / 60 HZ d) 460 Volt AC / 60 HZ. Features:- RELATED ALL TYPE CHILLER The glycol chillers, brine chillers, air cooled brine chillers, water cooled brine chillers and liquefiers offered by IRPL are tailor made to suit customer requirement. IRPL offers these low temperature Glycol / Brine up to an operating temperature of (-)50˚C for which compressors can be single stage open type / double stage open type / double stage semi hermetic / single stage screw depending on the size and the temperature requirement of the customer. For very low temperature application even Cascade systems are used for quick cooling. The material of construction is selected carefully depending on the application temperature and special alloys steel is used for ultra lower temperature application. These chillers can be air-cooled or water-cooled depending on the customer requirement. These chillers are rated for an ambient of (+) 480C and various operating voltages which are: a) 380 / 400 Volt AC / 50 HZ b) 460 Volt AC / 50 HZ c) 380 Volt AC / 60 HZ d) 460 Volt AC / 60 HZ Applications:- Food processing industry Accelerating mould of plastic. Extending the life-span of mechanical components. Electronic industry and ultrasonic cleaning industry. Electroplating industry cooling to enhance precision of electroplating. Food processing industry cooling to enhance the quality of food. Advantages:- Water temperature can be set at random from 0.5 degrees to 20 degrees. Intelligence control system can automatically adjust the load increasing and decreasing of the compressor to maintain outlet temperature in certain degree based on water temperature. The flow of water varies from 1.5m3/h to 24m3/h, which can meet different needs. Containerized structural design, which can be transported to places where refrigeration is needed.

Buyers can order our products in bulk, as we maintain year around availability. In addition, we have reliable transportation system to make timely delivery. We are a trusted supplier of Chilled Bath Units, providing the lucrative deals to the widespread customers at easy terms.

• Type: Portable
• Material: Fiber, Stainless Steel
• Certification: CE Certified
• Voltage: 220V
• Power Type: Single Phase
• Frequency: 50Hz
• Warranty: 1 Year

Industrial Refrigeration offers Chilled Water System for food, pharma, & chemical industries. IRPL manufactures Water Cooled Screw Chillers incorporating reliable screw compressors from Bitzer (Germany) and Frascold (Italy). These chillers are fully Microprocessor based suitable for process cooling applications from (+) 20˚C up to (-) 40˚C. For lower temperatures of up to (-) 50C look into Brine Chillers. These screw chillers are offered with up to 2 Nos. Screw compressors in one machine but having separate and individual refrigeration circuits. These chillers are world class, manufactured in an ISO 9001, certified factory with an option of using CFC free refrigerants R-407C & R-134a complete with in-built Process pump and stainless steel chilled water expansion tank. These chillers are also rated for an ambient of up to (+) 50˚C and cooling tower water temperature up to (+) 37˚C at the inlet of the condenser. The various operating voltages of these chillers are: a) 380 400 Volt AC 50 HZ b) 460 Volt AC 50 HZ c) 380 Volt AC 60 HZ d) 460 Volt AC 60 HZ.

• Type: Evaporative Cooling Equipment
• Feature: Durable, High Performance, Reliable
• Capacity: 1000 CFM to 50000 CFM
• Frequency: 50 Hz

DRI Spot Coolers provide an easy and effective method of cooling over heated areas within a larger area, as opposed to providing general cooling by means of a remote cooler fixed at one place. The Arctic Spot Cooler benefits Portable Cooling Durable & reliable Environment friendly Economival operation Comfortable working environment Easy Maintenance

• Type: chilled beams
• Condition: New
• Operating Voltage: 380/400 VAC
• Capacity: 3HP-50HP
• Certification: ISO-9001:2008
• Mounting: Floor Standing

We are the main supplier of this product.

• Features: High performance , Durable , Cost effective

We are offering industrial mancoolers. The um utility mancooler is designed for localized cooling and air circulation. The utility mancooler design enables the fan to operate on the floor as a free-standing unit or to be rotated in its base and mounted on the wall. The um features a macheta® airfoil propeller, propeller and motor side safety guards, and a heavy-duty tubular base.

• Brand Name: Ni3 Engineering
• Color: Multicolour
• Features: Sturdy design, Smooth functioning , Precisely engineered.
• Thickness: 0-25 mm
• Item Code: CoolingSystem
• Suitable For: Training Center
• Material: Stainless Steel

Enginemates Heat Transfer has been involved in working for a project in Morocco. Enginemates Heat Transfer has been involved in working for a project in Morocco. Fin Fan Cooler has been designed and fabricated using the guidelines from API 661 and ASME Section VIII Div 1. The MOC for tube bundle assembly SS 304 L and for structure carbon steel. Air cooled heat exchanger type is forced draft exchanger.   Project Location :- Jorf Lasfer, Morocco Project Title :- Dap Plants 107 B & C Application :- Steam Vent Condenser

Aesthetically Designed Construction. In-built Electrical & Safety Cut-Outs, Expansion Valves for Evaporators. Units designed for high ambient conditions. 30 Different models of positive and negative temperatures. Easy access to all componets for installation and maintenance. Evaporator can be ceiling / wall mounted Inner grooved coils for efficient heat transfer.

A charge air cooler (also known as an intercooler) is used to cool engine air (used for combustion of fuel) after it has passed through a turbocharger, but before it enters the engine.Apollo offers two methods of cooling the turbocharged air:Air cooled Charge Air CoolerWater Cooled Charge Air Cooler   APPLICATION Diesel EnginesLocomotives  SPECIFICATIONDesign Temperature: Up to 180° C Design Pressure: Up to 4 Bar. 

The Frigid-X™ Adjustable Spot Cooler is a low cost and maintenance free Adjustable Spot Cooler system which utilizes a vortex tube to produce cold air at one end. Temperature can be adjusted using a knob at the hot end to set the temperature precisely to your requirements. Temperatures range from approximately minus 30°F to room temperature and can be easily set with a thermometer. The Adjustable Spot Cooler comes with three brass generators for flow rate adjustment - 15 SCFM (425 SLPM), 25 SCFM (708 SLPM) and 30 SCFM ( 850 SLPM) providing refrigeration up to 2100 BTU/hr (615 Watts). All Metal Parts, Stainless Steel Body, Quiet - Under 70dBA, Tests Show Frigid-X™ Adjustable Spot Cooler is Constantly Quieter Than Competition! Sub-zero cold air temperatures from an ordinary compressed air supply forspot air cooler applications where adjustability is important! Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the adjustable spot cooler. Units are available with either a single point hose kit for small surface areas, Adjustable Spot Cooler or a dual point hose kit when heat is generated over a larger surface area. Adjustable spot cooler can produce a wide range of airflow and temperature by adjusting the knob at the hot end and changing the various generators supplied. The generators control the air consumption and are easily interchangeable. Our Adjustable spot cooler has a 25 SCFM (708 SLPM) generator installed that will produce up to 1,800 Btu/hr. of cooling. If less is required, the 15 SCFM (425 SLPM) generator can deliver 1,100 Btu/hr. If more cooling is needed Nex Flow™ can supply you with the 30 SCFM ( 850 SLPM) generator for up to 2,100 Btu/hr. of cooling. APPLICATIONS Solder Cooling Adjusting thermostats Cool plastic machined parts Set hot melt adhesives Cool welding horns on ultrasonics Cool molded plastics Cool Electronic components Cool heat shrink tubing ADVANTAGES No moving parts No electricity or chemicals Small, lightweight Low cost Maintenance free Instant cold air Durable - stainless steel Adjustable temperature Interchangeable generators

• Type: Cooler
• Country of Origin: Made in India
• Brand Name: Thermofreeze Engineers
• Capacity: 10 L
• Material: Mild Steel
• Usage/Application: Industrial Ammonia Condensing Units
• Dimensions: 5 Feet Length
• Frequency: 50Hz

• Size: 380 to 1200mm.

Man coolers Ultra heavy duty industrial mancoolers for spot cooling in Hot work where workmen have to work in front of Hot Equipment Metals etc, where High Blast of Air or Long Throw of Air is required. Cast Aluminum Alloy Aerofoil Impellers.

• Type: Fin Fan Coolers
• Material: Fiber, Metal, Plastic, Stainless Steel
• Weight: Multiweight
• Color: Black, Brown, Grey, Light Brown, Purple
• Voltage: 110V, 220V
• Condition: New
• Temperature: 0-200 Degree C

We are the main supplier of this product.

The FWKS is a compact fluid-water cooling system for cooling and lubrication circuits with a plastic tank with circulation pump, a plate heat exchanger and additional accessories. This system is primarily used as a temperature-controlled intermediate circuit. In this way the contamination and corrosion in the coolant circuits which could arise as a result of directi cooling with poor water quality is prevented. Function: The pump conveys the cooled operating fluid from the tank through the component that is to be cooled. Once there, it absorbs the heat. It then flows back to the plate heat exchanger, where it is returned to a cooler temperature by the cooling water. Technical data: Cooling capacity: up to 250 kW (depending on the limiting conditions) Flow rate: up to 300 lmin Tank content: up to 110 l Cooling medium: water

• System: A system with very low running cost at higher capital cost
• Pay back period: 2 to 4 yrs.
• Principle: Radiation Cooling (Hydronic Cooling)

Refrigerating Cooling units are available for specific high duty applications. Please note that due to the specialised nature of such requirements the specification, model and pricing information is available on application. Please contact Orbitec for more information.

Chilled Shower is mandatory after Sauna and Steam bathing to get the most exhilarating experience. A Chilled water pressure bath rejuvenates the body after a hot sauna or steam bath. The water temperature maintained is 7°C to I 2°C. Hot Sauna or Steam open the pores of the skin and Chilled Shower cleans the skin & contracts the pores back to normal leaving behind a soft, smooth, clean skin and a refreshing feeling. Research indicates that chilled water bath provides muscle simulation and also enhances mental ability by reducing stress level.

• FEATURES: 1. Pre-mixing with back-blending and controlled retention

WESMAN SIMPSON MULTI-COOLERS are specifically designed to provide the mixer with sand that is cooled to temperatures that allow optimal mulling, premixed to eliminate return sand variations and with a moisture content controlled within tight tolerances. The result is optimal mulling and high-quality, profitable castings.

Ultra heavy duty industrial mancoolers for spot cooling in Hot work where workmen have to work in front of Hot Equipment/ Metals etc, where High Blast of Air or Long Throw of Air is required. Cast Aluminum Alloy Aerofoil Impellers. Size: 380 to 1200mm. Type: Pedestal / Wall mounting / Tubular. Effective Throw: 6 to 30 mtrs. A must for Foundries, Forge shops, Steel Plants, Glass Industries and Large workshops.

We are the leading manufacturers and trader of Coolant Management Systems and our product is made of good quality. A complete laboratory service for analysis of coolant samples and technical advice is available as an integral part of the CMS fluid control system. The CMS concept is based on both direct supply of fluids and equipment or a range of modular management services, from basic control to complete management.

We at Alfa Fans have designed Man Coolers to provide utmost volume circulation of air , hence resulting in positive feedback from our esteemed clients . We offer a range of sizes as per customers requirement , which has help us to adapt specific grounds in the fan industry .

Air Cooling Units, Evaporative Condenser, Ice Plant Equipments

Air Cooling Unit, Spiral Fin Tube, Auger Filler, Form Fill Seal Machine