Industrial Coupler Dealers in Fort, Mumbai

The Industrial Couplings delivered by us are sturdy in make and have long working life. Our team professionals ensure that the products we offer are sternly manufactured using the certified array of raw materials. We conduct strict quality checks while sourcing the raw material. Far-famed for the excellent Industrial Couplings, we are a notable supplier thriving on the customers' trust for a long time now.

The GRINNELL Rigid Coupling's universal tongue and groove design of the coupling housings ensure trouble free installation. The Figure 772 Coupling provides rigid joint by firmly gripping along the circumference of the pipe grooves. The Figure 772 Coupling is UL Listed for grounding and bonding. This coupling is suitable for bonding systems with a maximum service entrance capacity of 200 amps.

• Material: Steel 
• Shape: Cylindrical
• Brand Name: Unique
• Features: High power-to-weight ratio , Easy installation with 'Drop Out' spacer, Replaceable element blades,High torsional rigidity with low axial stiffness.
• Usage/Application: Industrial
• Torque: 240000 Nm
• Speed: 25000 RPM

• Dimension: 1900 x 140 x 140 mm

Construction of Excel Gear Couplings Full gear type XFG Gear Coupling consists of two identical toothed hubs, two identical flanged sleeves with internal teeth, A flenge gasket, a set of flange dolts, nuts and lock washers, lube pluges with gaskets and two oil / greese retaining seals over the hubs. Features for Full Gear Coupling • Standard full flexible gear coupling TYPE XFG accomodates angular & parallel misalignments or a combination of both as well as axial misalignment(end float). • Ideal for horizontal, closed coupled application including fans, overhead cranes, conveyors, steel & paper mill equipements. • One or both the hubs can be easily revesed for more than normal shafts seperation applications. Features for Half Gear Coupling • Standard half gear coupling TYPE XHG cn not accomodate parallel misalignment. • Used primarily with floating asemblies. Extensivly used for cross travels and long travel line shaft drives.

• Material: Steel
• Usage: Industrial
• Temperature bearing capacity: 40 to 130 Deg C
• Surface Finish: Polished

CBC provides high quality Jaw Couplings which are resistant to oil, grease and many solvents. With wide industrial applications, FALK Jaw Couplings have good atmospheric and chemical resistance.

• Size: 1 inch
• Application: Gas Pipe
• Material: PU
• Color: Black
• Weight: 35 gm
• Hardness Range: 35 HRC

• Material: natural rubber
• Color: Black
• Size: 2.5 inch
• Shape: Round
• Country of Origin: Made in India
• Usage/Application: water Pump
• Brand: star
• Hardness: 50-60 Shore A

• Packaging Type: Box
• Shape: Round
• Coupler Type: Clamp type
• Size: 14mm to 40mm
• Length: 15mm to 90mm

• Color: Yellow
• Material: Polyurethane
• shores hardness: 70A- 95A

We are main supplier of this product.

• Type: Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT
• Material: Carbon Steel & Stainless Steel
• Shape: Round
• Color: Silver
• Country of Origin: India
• Size: 1/4
• Class: 3000 LBS, 6000 LBS, 9000 LBS
• Form: Elbow, Tee, Nipple, Coupling, Plug, Socket, Bushing, Union, Weldolet, Sockolet, Threadolet
• Dimension: ASME / ANSI B16.11
• Specification: ASTM A182

quick connecting couplings conserve energy and are easy to connect / disconnect without the use of hand tools, for thousands of purposes where products are transfered by pipe or hoses, like Brewing, Chemical, Mining, Fertilizer, Petroleum, Steel Plants, Power Plant and Pneumatic Tools. MAIN BENEFITS : Excellent chemical and temperature resistance. The in-liner is totally inert and ultra-smooth: no contamination in smell and taste. Excellent resistance to mechanical stress and deformation. It can easily be sterilized using any cleaning products. Compatible with safety clamps DIN 2817.

• Material: Metal
• Outer Diameter: 0.5-50mm
• Brand Name: Kcass, Aarpee
• Size: 1inch, 2inch
• Thickness: 20-30mm
• Surface Treatment: Polish
• Operating temperature: -40

• Power: 45x1.4 = 63 kW.
• Max. Speed (rev/min): 4500

Polydrive Tyre couplings provide all the desirable features of an ideal flexible coupling, including Taper Lock fixing in India. The Polydrive Tyre coupling is a "torsionally elastic" coupling offering versatility to designers and engineers with a choice of flange combinations to suit most applications.The flanges are available in either F or H version Taper Lock fitting or bored to size B. With the addition of a spacer flange, the coupling can be used to accommodate standard distance between shaft ends and facilitate pump maintenance. Polydrive Tyre couplings can accommodate simultaneous maximum misalignment in all planes without imposing undue loads on adjacent bearings and the excellent shock-absorbing properties of the flexible tyre reduce vibrations and torsional oscillations. Polydrive tyres are available in natural rubber compounds for use in ambient temperatures between -50°C to +50°C Neoprene rubber compounds are available for use in adverse operating conditions e.g. oil or grease contaminations and can be used in temperatures of - 15°C to + 70°C F.R.A.S. tyres are available for use when fire-resistance and antistatic (F.R.A.S.) properties are required. Torque-bore range : The range includes couplings with torque capacity upto 12606 Nm. and bore diameters upto 190 mm. Misalignment : Handles parallel, angular and axial displacements, either singly or in any combination. They can accommodate parallel misalignment upto 6 mm, angular misalignment upto 4O and end float upto 8 mm. Torsionally Soft : Cushions against destructive shock loads protecting the complete system, preventing expensive breakdowns and lengthens machine life. Free of Backlash : Does not create 'snatch' on take up of the drive. Installation : Requires neither special tools nor skilled labour to assemble. Alignment is quickly checked by placing a straight edge across outside diameter of flanges. The split flexible tyre is then positioned in the flanges and the screws tightened into place. Damping : Reduces vibration and torsional oscillations developed in internal combustion engines, the amplitude of which increases greatly at critical points in the speed range. Polydrive Tyre coupling dampens these destructive vibrations. Maintenance : Because there are no moving parts, no lubrication is required. Periodic visual inspection of the tyre is all that is necessary. Easy Element Replacement : To replace flexible element simply loosen the clamping screws, remove the tyre and replace with a new one. It is not necessary to move either driver or driven machine or coupling flanges. Environment :   Use of natural or Neoprene rubber compounds makes the Polydrive Tyre coupling suitable for use in most conditions. For fire hazard areas the F.R.A.S. tyre is recommended. This allows free flow of electricity between the two shafts to avoid static electricity build up. Details required for coupling selection Type of driven machine and operating hours per day. Speed and power absorbed by driven machine (if absorbed power is not known, calculate on power rating of prime mover).   Diameters of shafts to be connected.

• Usage: Industrial
• Material: Stainless Steel
• Brand Name: Mercury International
• Size: 3 inch
• Minimum Order Quantity: 1 PCS

• Material: Alloy Steel
• Thickness: 10-15mm
• Application: Industrial
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing
• Technics: Forged
• Finishing: Polished

We are into offering Steel Couplings that are used in various applications due to their high strength and durability. These couplings are manufactured using high-grade steel and highly advanced techniques that ensure their quality and durability. Our range of Steel Couplings is duly tested on various parameters in order to deliver the clients with an impeccable quality range. In addition, we offer Steel Couplings in various sizes and at attractive prices. Obtain from us, couplings in small as well as bulk quantities. Features : Superior quality Durability Resistant to corrosion Smooth functionality

Our extensive range of easy to install Quick Connect Couplings are manufactured keeping into attention every detail of functional variations. Quick couplings are exported to a large number of industries across the globe. We hold the capabilities to engineer products as per our client's specifications requirements.

• Material: Stainless Steel
• Finishing: Polished
• Shape: Round
• Speciality: High Strength, Fine Finished, Excellent Quality, Durable, Crack Proof, Corrosion Proof
• Usage: Pneumatic Connections, Hydraulic Pipe, Gas Pipe
• Coupling Size: 4 Inch, 6 Inch, 8 Inch
• Type: Hydraulic Coupling
• Country of Origin: India

• Type: Coupler
• Material: Mild Steel
• Diameter: 15-20mm, 20-25mm, 25-30mm
• Length: 2inch, 3inch
• Application: Jointing
• Weight: 20-30kg, 40-50kg
• Grade: AISI
• Color: Black
• Feature: Crack Resistance, Durable
• Condition: New
• Finishing: Non Polished

• Size: 48mm, 51mm
• Min. Slip Load: 12.5 KN
• Min Distortion Load: 30 Kn

Through the years we has become a leader in advanced coupling technologies that compensate or minimize the effects of unavoidable misalignment and end movement of coupled shafts. Utilizing advanced testing, analysis and manufacturing processes. We provide highly-engineered coupling solutions to meet customer requirements. Our duly hardened and gowned gear teeth in contrast with ordinary gear tooth forms, represents the ultimate achievement in the art of gear tooth design

RANGE OF HOSE COUPLINGS   SHARDA INDUSTRIAL CORPORATION offers a complete range of fittings for their hoses. Many of them are specified in the list of this guide, but virtually and type, for any use application can be supplied after consulting with our technical department. Adaptors, accessories, such as blank caps, dust plugs and delivery / filling nozzles are available.   MATERIALS   All the hose fittings may be obtained in a variety of materials according to the compatibility with various media, including Stainless Steel, Brass, Aluminum, Carbon steel, Polypropylene, PTFE, and for special application, metal fittings can be coated with special PTFE coating.   METHOD OF ATTACHMENT    hoses are generally supplied with factory end connections to customer requirements, from our factory. All metal components, including end fitting, are electrically bonded to give full end to end electrical continuity. On Specific request, electrically discontinuous hose assemblies can be provided. For all type of end fitting that enters the hoses and forms the mean by which the fittings is connected to the hose, is provided with scroll on the surface, that correspond to the pitch of the internal helix wire of the hose. Then, the end fittings will be attached to the hose by the use of a special designed lip seal, made from elastomeric materials depending on the chemical resistance to the product conveyed, and a material from elastomeric materials depending on the chemical resistance to the product conveyed, and an metal ferrule which can be externally swaged or crimped. This system guarantees a great safety to the complete assembly.

Technical Specifications Size: As Per Customer Requirements. Material: Gun Metal & As Per Customer Requirements

These types have high torque to size ratio for their compact assembly capable of both high load and high speed. They accommodate angular and parallel misalignment or combined angular and Parallel misalignment. Available EX-STOCK from 100 to 110 sizes.

• Size Range: 1/8" to 2"
• Sizes: 1/8", 1/4",3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"
• Threads: BSP, NPTF, SAE, JIC, Metric, DIN2353
• Working Pressure Rating: Upto 400 Bar
• Burst Pressure Rating: Upto 2000 Bar

HQ Series couplings are designed for use in excavatorhammer circuits and other applications involving high pressure pulses. Construction plant, mobile equipment, general industrial, nuclear, mining and agricultural.   Advantages :    Flat mating faces are easily wiped clean to prevent the ingress of contaminants Improved flow path minimize the pressure drop Non-spill design avoids fluid loss during connection and disconnection No air intrusion during connection Locking sleeve prevents accidental disconnection Zinc nickel surface treatment eliminates chrome 6 and exceeds 200 hour salt spray tests to white rust