Industrial Coupler Dealers in Mulund East, Mumbai

Under the misalignment condition of two shafts of the equipments, the teeth contact in case of straight cut hub will be as minimum as shown in the figure No.1 Under heavy loads the ends of the hub teeth will get damaged resulting in the excessive play between hub & sleeve. And, therefore the reduction in life of coupling. Triple-Crowned Teeth The triple crowned teeth hub is manufactured on a fully automatic hobbing machine with built in crowning attachment which is controlled by hydraulic & electronic system. Under the misalignment condition of two shafts on the equipment, due to the curvature on teeth flank the contact area is much more and therefore , there is increase in life of coupling.

• FEMALE COUPLING: GM IS:318 LTB-2
• MALE COUPLING: GM IS:318 LTB-2
• SPRING: IS:7608
• WASHER: RUBBER IS:397

• Country of Origin: India
• Type: Sealing
• Brand Name: Amar
• Material: Metal
• Shape: Round
• Certification: ISO 9001:2008
• Color: Blue
• Finishing: Polished

Features ·        For high pressure applications up to 700 bar pressure. ·        For high vacuum distillation in Round Bottom Flask available for 50 ml - 10,000 ltrs. Reactors. ·        High torque magnetic drives from 1 to 1000 Nm. ·        Materials of SS316, Hastelloy C, Inconel, Monel, Titanium, Zirconium etc. ·        Compact inline motor & magnetic drive for 50 ml - 100 ltrs reactors. ·        Suitable for glass/metal reactors / autoclaves / fermenters/ thin film evaporators etc. ·        Offered with CE, ATEX, U2/CSA certification on request. ·        Zero leakage hence zero maintenance & zero breakdown for years. ·        Very useful for long or round the clock reactions as in gland/mechanical sealing if there is any leakage midway, the whole batch may go waste. ·        Noiseless, vibration free & flexible hence overload results in coupling slippage safeguarding the motor. ·        Safe for toxic / hazardous & expensive chemicals. ·        No friction losses hence lower power consumption/ thin film evaporator. ·        Retrofitting existing gland / mechanical seal with magnetic drive for reactors of any make & size ·        Application: The high pressure gland/mechanical sealings need replacement after every 200-1000 hrs of working depending on the application & are of use in limited pressure conditions. However, magnetic drives can run virtually life long without leakage. AMAR make magnetic drives can be used for a variety of applications including high pressure as well as full vacuum experiments involving metal as well as glass reactors. In these applications, the magnetic drive replaces the traditional stuffing box, mechanical seal and lip seal to provide a leak-free, non-contaminating pressure and vacuum sealing suitable for pressures up to 350 bar and temperatures up to 500°C with water cooling. These magnetic drives can be custom designed for individual requirements by defining the thread or flanged shaft and the drive end connection. ·        Amar High Vacuum zero leakage magnetic drive couplings or stirring for high vacuum distillation in round bottom flask (RBF) in India. The leakage of vacuum due to distillation using conventional PTFE bush/ tape results in contamination of the product. This is totally avoided by using zero leakage magnetic coupling/mixers with suitable taper/glass joints like B24, B34, B/NS29/32, B/NS45/40 etc. These couplings are cost-effective & guarantees superior product quality without any contamination. Clients can buy MG series coupling from Amar with their existing stirrer or alternately MMG series compact line vibration free motor & coupling in their existing RBF.

• Material: Brass
• Shape: Round
• Application: Fire Hose
• Thickness: 20-30mm, 30-40mm
• Color: Golden
• Finishing: Polished
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing

Automatic handling, storage, and distribution of the products become easy with our automated warehousing system. Also, our storage facility is timely upgraded to meet the changing market scenario. Keeping the quality standards high, we make certain that prior to production, the inputs (raw material) are examined by the professionals to make the final product free from defects.

fire hose delivery couplings are one of the prime manufacturing products of our company. For the maximum customer satisfaction, we customize our fire hose delivery coupling as per client’s specifications. specifications : diligently designed by expertsdemand low pressure fluid transferused different grades of steel, ss and brass in its fabricationensure durabilityoptimum performance widely used in : parking placeslifts and elevatorsresidential buildinggo-downs and warehousesofficial buildings

• Usage/Application: Industrial
• Brand Name: Power International
• Packaging Type: Box
• Material: Steel
• Color: Silver
• Size/Dimension: As per requirement

• Type: Coupler
• Material: Copper, Plastic, Steel
• Thickness: 10-15 mm
• Weight: 10 gm, 20 gm, 50 Gm
• Color: Yellow, Copper
• Condition: New, Used
• Finishing: Polished, Non Polished
• Feature: Light Weight, Durable
• Warranty: 1 Year

Coupler

• Usage/Application: Industrial
• Brand Name: Power International
• Packaging Type: Box
• Material: Steel
• Color: Silver

• Speciality: Dimensional accuracy, Feasible rates, Unmatched quality

We are offering best west couplings supplying company.

63mm Male & Female Instantaneous Delivery Hose Coupling Multi-serrated IS: 903 ISI marked 63mm only. Test Pressure : 21 kgf /cm2. & BS Type avaliable1 ½” 2”2 ½”3”Gun Metal BrassAlluminium (Light Alloy)S.S

The role of an air termination system is to capture the lightning discharge current and dissipate it harmlessly to earth via the down conductor and earth termination system. Therefore it is important to use a correctly designed air termination system. IEC/BS EN 62305-3 advocates the following, in any combination, for the design of the air termination: Air rods (or finials) whether they are free standing masts or linked with conductors to form a mesh on the roof Catenary (or suspended) conductors, whether they are supported by free standing masts or linked with conductors to form a mesh on the roof Meshed conductor network that may lie in direct contact with the roof or be suspended above it (in the event that it is of paramount importance that the roof is not exposed to a direct lightning discharge) The standard makes it quite clear that all types of air termination systems that are used shall meet the positioning requirements laid down in the body of the standard. It highlights that the air termination components should be installed on corners, exposed points and edges of the structure. The three basic methods recommended for determining the position of the air termination systems are: The rolling sphere method The protective angle method The mesh method

• Brand Name: Indian
• Application: Coupling Beween Fuel Pump & Blower Motor
• Model: 1step
• Model/Type: Pump Coupling

air hose claw coupling, SAE Flanges, Hydraulic Fitting

• Feature: Less Backlash Compact Assembly Larger Bore Capacities EN-9 Forged Steel Hubs Close tolerance connecting bolts High power to weight ratio

Our flexible geared couplings meet the acceptance norms set forth in IPSS : 1-01-005-86-specification followed by the Indian steel industry. The couplings are known for the highest possible torque transmission capability, greater mechanical flexibility and ease of compensation for angular, parallel and axial misalignments of connected shafts with minimum power loss. Gear hubs and outer sleeves are manufactured from medium carbon steel. The teeth are induction hardened to 42 HRC for obtaining longer life. The teeth are generated by involute system having 30 degree pressure angle to make a quantum break-through in coupling design and performance. The coupling parts and gears are interchangeable.

Pipes and tubes hold excellent value in the industrial environment. They are effective means of transport of fluids, liquids and gases. Besides there are also other commercial products and tools which support the production processes. Coordination in the any of the work is very important and make the procedure and activities to take place. Humans are also greatly dependent on other people and machines for making the processes possible. Tubes are used for the transport of components and fluids. Using tube fitting liquids can be commuted to the long ranges and also the initiatives of human resources can be brought down. Pipe also have exact function like that of tube. The only difference can be found in the passage of materials through these two products. Tubes are more flexible and use for the transportation of light liquids.

• Material: SS
• Packaging Type: Box
• Material Grade: SS 304
• Surface Finish: Polished

• Bore size (front): Ø5
• Bore size (back): Ø5
• Diameter (mm): Ø25
• Length (mm): 30
• Weight: 38

Encoder Couplings, Roller Chains, Pulley

gun metal coupling, Single Door Hose Box, High Velocity Spray Nozzle

Gun Metal Stainless Steel male and female coupling heavy duty 63mm size instantaneous type as per IS: 903 and with ISI mark.

Hydraulic Coupling, Brake Hose, Hydraulic Equipment, Pneumatic Equipment

Brass Couplers, Cable Glands, brass clamps, Copper Bonded Earth Rods

Rebar Couplers, connecting loop boxes for precast, forging upsetting machine

putlog couplers, Concrete Farma, Water Stopper, Safety Bracket

Textile Dyes, dye intermediates, Color, Chemistry, basic dye, azo pigment

Parallel Threaded Rebar Coupler

camlock quick release couplings, indiflex composite hose

Instantaneous Coupling, Mechanical Foam System, Glass Bulb Sprinkler