Industrial Equipment Corporation Dombivali, Mumbai, Maharashtra

Walk in stability chambers are cost effective and a reliable solution for high volume test applications for stability studies. The chambers reproduce and closely monitor environment with a precise combination of temperature and humidity.The chamber is available in standard size and also custom made to suit the layout and requirement.

Walk In Cooling Chamber are cost effective and a reliable solution for high volume test applications for stability studies. The chambers reproduce and closely monitor environment with a precise combination of temperature and humidity. The chamber is available in standard size and also custom made to suit the layout and requirement.

IEC VISCOMETRIC BATHS are designed for testing of manufactured product and materials to acertain their suitability for use in tropical countries for botanical, chemical, physiological and zoological studies. IEC VISCOMETRIC BATHS is of S.S. The bath is provided with single door sealed by rubber gasket on the upper side. Efficient circulation of the liquid is effected by a stirrer coupled to a motor which draws the liquid across the chamber and & recirculate it into the working bath. A control panel is provided to maintain the required temp.

EC autoclaves are successfully used in research as laboratory autoclaves as well as in production as industrial autoclaves(e.g.as production autoclave in the pharmaceutical industry or the food industry) .An autoclave is a device used to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C for around 15–20 minutes depending on the size of the load and the contents. It was invented by Charles Chamberland in 1879, although a precursor known as the steam digester was created by Denis Papin in 1679.An autoclave is a pressure chamber used to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C (249°F) for around 15–20 minutes depending on the size of the load and the contents.Autoclaves are manufacture in different shapes like Vertical Autoclave , Horizontal Autoclave , Portable Autoclave , Stainless steel Autoclave , Cylindrical Autoclave ,Sterilization autoclaves are widely used in microbiology, medicine, podiatry, tattooing, body piercing, veterinary science,mycology, dentistry, and prosthetics fabrication. Other types of autoclave are used in the chemical industry to cure coatings, vulcanize rubber and for hydrothermal synthesis, growing crystals under high temperatures and pressures. Synthetic quartz crystals used in the electronic industry are grown in autoclaves. VERTICLE AUTOCLAVEWe are the manufacturers of all types of vertical autoclave for industrial and research institutes situated at Dombivli - Thane, Maharashtra.  Specifications: · Electrically heated vertical sterilizer is used for sterilization under saturated steam pressure at any selected point between 10 to 20 psi (adjustable). The unit is double walled with boiler made of 18 SWG stainless steel sheet. Outer cover is made up of mild steel duly enamel painted. The space between boiler and outer cover is provided with air insulation. Lid is made up of stainless Steel plate and is tightened by wing nuts/radial locking system.· Autoclave is fitted with a gasket made up of neoprene rubber. Autoclave is hydraulically tested up to 40 psi before dispatch as a safety measure. Fitted with water level indicator, pressure gauge, steam release cock, spring loaded safety value and immersion type heating element. The unit is supplied with S.S basket, cord and plug to work on 220 Volts A.C. Supply.

IEC make Vacuum Ovens are widely finds its applications in industries such as chemical, electrical, electronics, plastics, automobile and food. These muffle furnace are also customized according to the customers given specifications and directions.IEC make Vacuum Ovens used for providing heating of Volatile liquid having low flash points, degassing of solutions, drying of product mass under vacuum to cut down the drying time and other application are available with following features with high performance under quality and standards.� Design as per International STD &cGMP regulations.� Inside body made of stainless steel & outside body available in mild steel powder coated (STD model) OR stainless steel with dull smooth buff (GMP model).� Toughened glass temperature resistant Observation window.� Temperature controlled by microprocessor based PID controller with digital display.� Printer interfacing facility to generate records (optional).� PC Interfacing facility with RS 485 for data management (optional).� Door with positive clamping arrangement & silicon gasket.� Stainless steel perforated removable trays.� Vacuum Gauge, Vacuum Release Valve and Vacuum Nozzle.� Works on 230V AC Single Phase 50Hz (country specific).

We are expertise in manufacturing, supplying and trading of EC MAKE Tray Dryer. These products are ideally suitable for use for drying chilies, spices, papad, onions, fish, garlic, grapes, potato chips, cashew nuts, confectionery, macaroni , wood etc., and also for drying pharmaceutical chemicals, plastic granules, powders and granules. Heating is either by electric or steam or both combined, various models are listed in this leaflet to suit customer requirements custom built models can be quoted on request. Features: • Various uses• Electric and steam heating availability• Easy to useModels : IEC TRAY DRYERS are available in Five different models like 12 Trays , 24 Trays , 48 Trays , 96 Trays , 192 Trays , ranging from 12 trays to 196 trays.Temperature : standard models are designed for 100 oC and 300 oC maximum temperatureConstruction : The external frame work is made up of 10 gauge MS Plate Both exterior and the interior is covered with heavy gauge CRCS sheet In between the space resin bonded special quality fiber glass heat insulation slabs are provided. Safety guards for fan blade and heaters are fitted. The interior is painted with heat resistance aluminum paint. The exterior is spray painted with silver grey gloss paintDoor : According to model doors are provided with smooth moving hinges, latches and sealing gasketFan & motor : well balanced large propeller type fans(s) fitted inside the chamber with suitable shaft and dual bearings with electric motors drive.Heaters : Tubular heaters are fitted inside the chamber for maximum heat transferControls : Necessary contactor assembly, on and off switch, Digital Temperature controller with indicating meter, indicating Neo lamps operating push buttons are incorporated in the control box.Damper : Adjustable exhaust damper with an arrangement for pre-filtration in the air inlet.Optional : Trolleys & trays supplied to customers as per their optional requirement. Thermograph supplied at the option of the customers to record the temperature.Steam heated models : These are provided with finned tubular steam coils instead of / in addition to heaters, along with solenoid valve

We offer Temperature Transmitter series Head mounted and DIN rail mount MODELS :-MST- Series MODELS – MST-10-RL , MST-100-BTMT- Series MODELS – TMT-191-B , TMT-130, TMT-131

INDUSTRIAL EQUIPMENT CORPORATION is Distributor & Supplier of Thermosensor brand Sensors like Thermocouples, RTDs, Thermowells and Process control instruments. We are the reputed Suppliers of Head Type Thermocouple & RTD Sensor, Bionut Spring Loaded Thermocouple and RTD Sensors, Rotating Holder Adjustable Thermocouple and RTD Sensors, Rotating Spring Thermocouple and RTD Sensor, Heavy Duty Metal Sheathed Industrial Thermocouples, Ceramic Sheathed Thermocouple, General Purpose Thermocouple and RTD Sensor, Mineral Insulated Thermocouple & RTD Sensor, Bolt and Washer Type Thermocouple & RTD Sensor, and Thermowell.The company was ventured into the process industry by providing the repairing needs of industrial equipment. This helped in gathering data of different practical field requirements and problems faced in online process. These along with our Research and Development have empowered us to develop high-end products.

We are expertise in manufacturing, supplying and trading of Tablet Hardness Tester. This is a small device for measuring the hardness i.e. crushing strength of tablets. This is prepared with the help of chromium plated brass wire with a scale length of 66 mm. calibrated to read 0-20 kg in 1 kg div. scale is adjustable to compensate ageing of the spring which provides compressing force. It is portable and gives accurate reading. A small portable device for measuring the hardness (crushing strength) of tablets. Made of chromium plated brass, with a scale length of 66 mm. calibrated to read 0-20 kg in 1 kg div. scale is adjustable to compensate aging of the spring which provides compressing force. Features: • Accuracy• Portable• Optimum scale length

Stoving Oven offered is backed by latest technology support and provide support for varnishing curing facilities in support with varnish tanks. Providing for optimum electrically heated interface, these ovens come with advanced circulation fans that provides for ensuring uniform heat distribution as well as over-temperature device prevent runaway support. We can also provide the ovens with custom optional extras as per the specific demands o0of the customers.

Stability testing of pharmaceutical products is addressed by the ICH (International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use) and the final guidance on stability testing has been adopted across Europe, Japan and the United States. Within stability test chambers, parameters such as temperature, humidity, differential pressure, lighting, gas levels and other environmental conditions must be controlled, monitored and documented. To reduce the risk of failed studies, a monitoring system designed for both functionality and compliance is required. Stability Chambers and Incubators with heating, cooling, lighting and humidity control are specifically designed for applications in which exact and reproducible simulation of various environmental conditions are important such as stability testing of components, packaging materials, food or chemicals, germination studies, plant cell or tissue cultures, insect cultures and stability and photo-stability testing of drugs according stability testing is to provide evidence on how the quality of a drug substance or drug product varies with time under the influence of a variety of environmental factors such as temperature, humidity, and light, and to establish a re-test period for the drug substance or product under recommended storage conditions. Hence, Pharmaceutical Stability Chamber serves as an important quality attribute for the product. Construction & Design Features� Stability Chambers are Precisely Constructed and fabricated thereby giving consistency in performance-operation and an professional look.� Unique air circulation system, refrigeration system, humidity system, full view observation glass door and trays. Control Panel Features� Microprocessor-based PID controller with auto tuning option for accurate control of temperature and humidity conditions with printer interface module to store data with online and off line printer option as per print time interval.Safety Interlock Features� Thermostatic safety system is provided as an additional safety feature.� Low water level cut off for steam generation ( Humidifer ) system.� Dedicated Safety system to cut off the humidity system and chamber shut down in case of overshoot or undershoot temperature or humidity with audio visual alarm.� Electrical Safety fuses for short circuit protection.

IEC Thermal Chamber is designed for testing of electronics equipment at extremes of high and low temperature. The chamber exterior is constructed from strong CRCA sheets The interior is made of AISI 304 stainless steel. Forced air circulation is provided to ensure uniform temperature. Temperature control is by a solid state electronic controller with digital indication and panel display for proper function and malfunction. Thermal insulation is provided by thick layers of glass wool and expanded polyurethane. Porthole of suitable diameter can be provided

We are the manufacturers of all types of vertical autoclave for industrial and research institutes situated at Dombivli - Thane, Maharashtra.An essential requirement for general laboratory use, the top cover seals the portable autoclave with neoprene rubber gasket and is clamped to the lower tank by wing nut closing system. Inner chamber of portable autoclave is made of stainless steel fitted with pressure gauge up to 20 psi. The unit has spring-loaded safety valve for pressure adjustment and a dead weight safety valve. It is hydraulically tested up to 40 psi and is supplied with electric fitting, cord and plug to work on 220/230 volts A.C. This portable autoclave supplied complete with tripod stand.

IEC make muffle furnace are widely finds its applications in industries such as chemical, electrical, electronics, plastics, automobile and food. These muffle furnace are also customized according to the customers given specifications and directions. IEC make muffle furnace is Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double walled thick PCRC sheet, duly painted with attractive stove enamel. Heating elements are made of Kanthal A-1 wire and backed by high temperature cerwool insulation, which avoids loss of energy. The temperature control unit consists of highly accurate micro processor based PID & ON OFF Controller (timer facilities available optional), fitted in front of the furnace with two pilot lamps. The apparatus is complete with one thermocouple, silver thermal fuse, and main lead with power plug. To work on 220/230Volts AC or 400/440 Volts AC. Construction & Design Features? Muffle Furnaces are Precisely Constructed and fabricated thereby giving consistency in performance-operation and an professional look..? The outer casting is made of double walled thick PCRC sheet, duly painted with attractive stove enamel.? Light weight with ceramic wool insulation (instead of Brick insulation), ensures temperature stability and reduced energy consumption. Control Panel Features? Microprocessor-based PID controller with auto tuning for accurate control of temperature and conditions and printer interface facility to store data and to print it directly on a printer with variable print time interval.? Thermocouple sensor is provided to measure temperature in the Furnace.Safety Interlock Features? Thermal Fuse as a safety system is provided as an additional safety feature.? Dedicated Safety system to cut off the heating system and chamber shut down in case of overshoot or undershoot of temperature with audio visual alarm.? Furnace are provided with safety cut offs and alarms at centralised alert & security gate area.? Electrical Safety fuses for short circuit protection. Technical Data? Standard Model(S):Inside Muffle with ceramic wool insulation& outside mild steel powder coated.? GMP Model(G): Inside Muffle with ceramic wool insulation & outside with S.S. 304 matt buff.? Temp Range : 50?C To 1150?C

IEC LOW TEMPERATURE BATHS are designed for testing of manufactured product and materials to acertain their suitability for use in tropical countries for botanical, chemical, physiological and zoological studies.IEC LOW TEMPERATURE BATHS is of S.S. The bath is provided with single door sealed by rubber gasket on the upper side. Efficient circulation of the liquid is effected by a stirrer coupled to a motor which draws the liquid across the chamber and & recirculate it into the working bath. A control panel is provided to maintain the required temp.Construction & Design Features· Low Temperature Baths are Precisely Constructed and fabricated thereby giving consistency in performance and an aesthetic look.· Unique water circulation system, heating system .Resin bonded glass wool insulation ensures temperature stability and reduced energy consumption.Control Panel Features· Microprocessor-based PID controller with auto tuning for accurate control of temperature with printer interface module to store data with on line and off line printer option as per print time interval..· Resistive type temperature sensor ( PT 100). tandard Model(S):Inside S.S.304 with mirror polish & outside mild steel powder coated.· GMP Model(G): Inside S.S. 316 with mirror polish (with white coating) & outside with S.S. 304 matt buff.

For years we have been producing and supplying best quality Laboratory Stirrer. They are widely used in laboratories and experiment purposes. All the products are made using best equipments and machinery that we buy from our exclusive vendors. It efficiently carries out its works and has a longer service life compared to any other product in the market. All the products are made as per the ethics and codes laid down by the industries. Features: • Wide application• Low maintenance charge• Longer service life

Backed with years of experience, we manufacture the finest quality Laboratory Oven. These are available in different shapes and sizes and can be made available as per the details given to us by our clients. All the products are prepared using the finest quality equipments and latest technology available with us. We test and verify our products before we supply it to our buyers. IEC make Laboratory ovens are based on heating the sample by hot air electrically or forced air circulation.IEC make Laboratory ovens are suitable for applications in industries such as chemical , electrical , electronics , plastics , automobile and food.IEC make Laboratory ovens are double walled with glass wool insulation between the walls. Inner and outer chamber is made of M.S. or S.S. as per requirement. Air circulation motor is provided to maintain uniform temp. U type heaters are provided to achieve required temp.Temperature controller with overshoot protection system is provided to maintain the required temp.Construction & Design Features� Laboratory Ovens are Precisely Constructed and fabricated thereby giving consistency in performance and an aesthetic look.Unique air circulation system, heating system .Resin bonded glass wool insulation ensures temperature stability and reduced energy consumption.Control Panel Features� Microprocessor-based PID controller with auto tuning for accurate control of temperature with printer interface module to store data with on line and off line printer option as per print time interval..� Resistive type temperature sensor ( PT 100).

Oil Bath offered is backed by latest technology support and finds use as heated bath. As laboratory heating device, the equipment makes use of boiling oil for regulation of temperature that helps in obtaining precise different boiling points as per the requirements. Some of its features include suitability for high temperature applications, coming with electronic control and uniform temperature control for long-term stable performance, wide working temperature range, timed or continuous operation among others.

We are leaders in manufacturing and supplying of Laboratory Magnetic Stirrer. This is a compact and quiet running apparatus for stirring liquids in closed or open laboratory glass and non magnetic vessels. Vigorous to gentle stirring is possible. The case is provided with an anodized aluminum support rod at the back. The stirrer can be used for any stirring operation in volumes up to approx 2 liters of water. Features: • Holds maximum water• Compact• Anodized aluminum

We are one of the well known manufacturer, supplier and trader of Friability Test Apparatus. These products are used to determine the durability of tablets from the time of protection to the time of use. A transparent plastic drum has a plastic blade which carries the tablets along with it up to a predetermined height while the drum rotates and lets them slide off. They are made using the finest quality of material available in the market. Features: • User friendly• Accurate• Pocket friendly

Environmental testing of pharmaceutical products is addressed by the ICH (International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use) and the final guidance on environmental testing has been adopted across Europe, Japan and the United States.Within environmental test chambers, parameters such as temperature, humidity, differential pressure, lighting, gas levels and other environmental conditions must be controlled, monitored and documented. To reduce the risk of failed studies, a monitoring system designed for both functionality and compliance is required.Environmental Test Chambers and Incubators with heating, cooling, lighting and humidity control are specifically designed for applications in which exact and reproducible simulation of various environmental conditions are important such as stability testing of components, packaging materials, food or chemicals, germination studies, plant cell or tissue cultures, insect cultures and humidity and photo-stability testing of drugs accordingEnvironmental testing is to provide evidence on how the quality of a drug substance or drug product varies with time under the influence of a variety of environmental factors such as temperature, humidity, and light, and to establish a re-test period for the drug substance or product under recommended storage conditions. Hence, Pharmaceutical Environmental Chamber serves as an important quality attribute for the product

Deep Freezer Chamber offered is backed by latest technology support and perfectly match up to the demands of demanding lab working conditions. Featuring use of temper safety glass door, the presence of digital / PID controller and availability in different working capacities allow us to perfectly match up with the demands of the customers. Some of its features include coming with support of reliable proven compressors, completely sealed cooling system, durable and reliable system, low noise level, support of built-in temperature controller, lock and alarms among others.

These Water bath Shakers have wide applications in Biotechnology, Micro-Biology, Chemistry, Quality Control and other life sciences laboratories. A water bath is a device used in the laboratories to incubate samples in water maintained at a constant temperature. Temperature may be controlled digitally or by a dial and once set, the water bath cycles on and off to ensure constancy of the temperature. Some water baths have an additional shaking or stirring mechanism that can be set at varying speeds.

IEC Make Cold Test Chambers are designed for testing, treating and storage of product and material where controlling of climate is necessary. Cold chambers find applications in Pharmaceutical, Chemical, Automobile, Biotechnology, Telecommunication, Electronics, Defense Medical Equipment, Universities, Military Applications, Consumer Goods. Cooling Chamber offered find use in labs for controlling of temperatures and provide optimum support for storing of samples. Based on advanced technology support, cold chamber is suitable for use in areas requiring rapid changes in temperature. Some of its features include use of quality corrosion-resistant and easily maintainable stainless steel working chamber and housing support, allows maintenance of precise and homogeneous temperatures, temperature values of storage chambers measured as per defined industry standards among others. Features:- • Rapid air circulation • Durability • Longer service life • Heavy insulation • Motorized forced air circulation