Industrial Furnace Dealers in Andheri West, Mumbai

Biolab muffle furnace is ergonomically designed which provides efficient, reliable operation and enhanced chamber uniformity at high temperatures. They have been crafted for heavy duty operation. They provide minimum heat loss and optimized insulation. Chamber is heated by electric resistance heaters. The built-in fan system allows the abrasive gases come out of the furnace through a chimney. Basic specification : dimension: 360x480x540 mm inner dimension: 130x105x230 mm maximum temperature: 950°c working temperature: 950°c amperage (imax): 6.6 a

Specially designed for de-waxing and bum-out, and an optional programmer, jewellery casters can be sure that this furnace which fulfills their needs, heated stainless steel floor. Built In chimney for efficient fume extraction. Maximum space for flask. Normal operating temp. 800 0 C Rugged construction ensuring long life and maximum productivity. Extra wax tray. Safety door switch. Easily replaced elements.   Specification:  Size:4 , 6, 9, 12, 16, 24, Flask. Temperature: 1200 Degree Celsius Electrical Load: Defend on the Flasks. Supply : 230 V. AC. &  440 V. AC.  

The technology of bright annealing is applied for stainless strip steel so that it can it can keep bright surface after cold rolling. It is another treatment method for cold rolled stainless strip just like annealing-pickling. We can provide annealing line for stainless steel, continuous annealing line and hood-type annealing line. Different annealing furnaces can be designed based on different energy sources according to your requirement, and different thermal treatment is applied on different processing material.

Designed for minimum space requirements, our muffle furnaces work effortlessly at high temperatures and give reliable results. Equipped with electronic controller and memory to store different programs, it makes the operation user friendly. Chambers are crafted for heavy duty operation and minimize heat loss. Basic specification : dimension: 360x480x540 mm inner dimension: 130x105x230 mm maximum temperature: 950°c working temperature: 950°c amperage (imax): 6.6 a

• Capacity: 3.1 L
• Power Supply: 220V / 50Hz
• Dimension: 360x480x540 mm
• Inner Dimension: 130x105x230 mm
• Maximum Temperature: 950°C
• Working Temperature: 950°C
• Thermal Rate: 5°C/min-15°C/min
• Temperature Accuracy: ±1°C
• Amperage (Imax): 6.6 A
• Heating Program: Direct
• Program Memories: 1
• Net Weight (kg): 26 kg
• gross Weight (kg): 30 kg
• Maximum Power: 1450 W
• Catalog No.: 9421101481

• Type: Graphite Electrodes, Coated Graphite Electrodes
• Application: Industrial Use
• Thickness: Customised, Standard
• Color: Black, Grey, Z-Black
• Technics: Handloom Work, Machine Made
• Pattern: Plain, Printed
• Condition: New, Old
• Coating: Galvanised, PVC Coated, Ungalvaized UNG
• Feature: Eco-friendly, Flame Retardant, Good Quality, High Tenacity, High Tensile Strength, Light Weight, Perfect Finish
•  Diameter: Customised, Standard

Our packing system is systematized in such a manner that we can handle even bulk packaging with ease. Moreover, our packing experts take care of the customized as well as standard packing demands of the clients. We are highly acknowledged for delivering the orders within the stipulated time frame as we have excellent transit facility.

Moviroll systems allow the operator to effortlessly manoeuvre both large and small cylindrical loads on a flat surface and then place them on the roll stand shuttle cart. Compact, heavy-duty, fast and with low or no maintenance requirements, the new Moviroll roll pushers allow the movement of the load in a continuous and regular way and are ideal for handling corrugated, paper, tissue and cable rolls in a simple and safe manner. All Moviroll models are designed and made in Italy.

• Voltage: 220V
• Power: 1-3kw
• Driven Type: Electric
• Feature: Automatic
• Durability: Long Life
• Surface Finishing: Polished

We haved specialized in sphere of MFG. a wide range of High Temp. Oven that are triple walled & fabricated with heavy gauge M.S.& S.S sheet further the inner surface can also made in M.S. or S.S. Technical specifications : Ovens are triple walled. Inner chamber made of either M.S. or S.S.304 Gap between the two walled filled with ceramic insulation to avoid heat of loses with insulation of 150 mm. Heating Element are made of special type Air heater of S.S. ‘U’ Type tubular heater. With special type of wiring connection from out side body. Supplied with air draft motorized blower to circulate uniform temp. Thought out chamber temp. Range 50 ˚C to 400 ˚C with accuracy of ± 2 ˚C controlled by digital temp. Controller cum indicator.

Gmp-gc-16 muffle furnace of up to 1200°c: laboratory muffle furnace of max temp: 1200°c. Working temp: 1150 ºc. muffle size size dxwxh rating kw s. Rate(rs.) 1. 9”x4”x4” 2.0 30,350.00 2. 10”x5”x5” 2.5 36,500.00 3. 12”x6”x6” 3.5 43,000.00 construction: the unit has an outer body made up of ms with epoxy powder coat finish & a door with a heat resistant handle. The unit has a double walled type construction with the muffles body at centre of the furnace & the control box at top with 1"solid spacer in between. A coil type heater of kanthalnichrothal wire wound on the muffle with cerewool blanket serves as the heating element. A brick insulation+ ceramicwool +high density mineral wool insulation of 4" is also given to have skin temp.of furnace less than 50°c. The door is provided with heavy-duty hinges and latch-catch lock system to openclose the furnace. Control panel: it is located at the top of furnace and includes a auto tuned pid microprocessor based temperature controller cum indicator with cral thermocouples controls heating process.power:230v or 440v,50 hz as per requirements. Control will be ssr output type. Safety fuse with mcb for power is also provided.

Lafil industrial burners are pressure jet spill return fully automatic with stepless modulation & operate on oil, gas & dual fuels. They have been designed & manufactured to high standards in order to meet the widest demands. The burners can be used on a wide range of equipment like boilers, hot oil heaters, hot air generators & furnace. High turndown ratios can be achieved without deterioration in combustion quality. Operation can be totally automatic and dual fuel burners can also be supplied for combined fuel burning. Lafil burners are designed for low excess & are totally compatible with on line oxygen trimming systems which regulate excess air thus ensuring good combustion at all loads. Lafil also supply oxygen trimming systems for all suppliers. Custom made burners for fuels like blast furnace gas & other lean gases can be supplied on request. Proper selection of burner is based upon factors such as equipment capacity, furnace pressures, type of load & design of furnace. The burners can be supplied with blower, control panel, oil pumps, oil preheaters, duplex filters & gas trains etc.

• Type: Annealing Furnaces
• Material: Aluminum, Iron, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Condition: New
• Warranty: 2yrs
• Weight: 100-300kg, 1000-1500kg
• Voltage: 110V, 220V, 230V, 380V
• Power: 1-3kw, 12-15kw, 15-18Kw, 18-21Kw
• Driven Type: Electric, Pneumatic
• Automation Grade: Automatic, Manual

Owing to our expertise in this domain, we are indulged in offering a broad spectrum of electric furnaces.

We are offering lead pot. Lead container used for storing radioactive source pencil pig tail, accidentally left out of the projector. Made as per special design recommended by barc. 1] suitable for 40 curies of ir – 192. 2] suitable for 100 curies of ir – 192. features: optimized design enhanced service life high efficiency

Hi-Therm manufactured Furnace Gas Burner: Our furnace gas burner series is used on almost any kind of industrial furnace, ovens, air heaters and kilns. These burners are also called high temperature gas burners since they have a high temperature output. These burners are nozzle mix type burners which provide medium velocity flame with wide air/fuel ratio and turndown flexibility. Furnace gas burner is made of cast iron body with gas connection to give steady, reliable and proven performance. The air tube is made of Stainless steel material for higher temperature application, it is an Inconel material. These burners also have an observation port in the back of gas connection and a provision for pilot gas burner and flame detector. Furnace gas burner is also operated fully automatically with auto ignition system and Hi-Therm’s sequence controller with Ionization Rod/UV Cell as the flame supervisor. They are also available in On/Off models or High/Low models and PID controlled with the incorporation of flame controller. These burners work best with LPG.   Features : Highly robust construction Auto-ignition, fuel control and flame sensing systems models available Suitable for high temperature application Duo-bloc burners Highly reliable as furnace burners Models with facility of pre-purging available Wide Air/Fuel ratio Available in On/Off and High/Low models with PID controller incorporated with flame controller  

We are engaged in making available precision engineered Muffle Furnace. Muffle Furnace, which we offer, is made with excellent quality raw materials that we procure from the most trustworthy vendors of the domain. The Muffle Furnace, available with us, is appreciated in market for its trouble-free and reliable performance. Why Our Muffle Furnace? User-friendlyDurableDimensionally accurateIn compliance with the highest quality standards

The company is engaged in the manufacturing and supplying of Laboratory Muffle Furnace all across the country. The Laboratory Muffle Furnace, offered by us, is known for its excellent performance and longer working life. The clients can avail our Laboratory Muffle Furnace at the most competitive prices. Technical Specifications Table top modelDouble walled in constructionInner made of ceramic muffleOuter made of thick gauge M.S. Powder coatedHigh grade insulationFront opening doorLong lasting heating elementsSide mounted control panel for easy accessSolid state digital temperature controllerCr / Al � K � type sensorsSolid state safety fuseWorking Size (L X W X Depth) : 4� X 4� X 9�5� X 5� X 10�6� X 6� X 12�9� X 9� X 18�Temperature range : 960 Deg C to 1160 Deg C

Diesel Filter, Air Filters, Industrial Lubricant, Greases, Gear Oil

We are offering muffle furnace t ype : laboratory type light weight moc : gi finished in powder coating 930 o c 1200 o c temp. : upto control electronic digital disply max. Surface temp.: 400 o c

Coated Graphite Electrode, ceramic coated oxygen lancing pipes

Gas Burner, continental gas burner, Hot Plate, Kitchen Equipment

Ceramic Furnace

Electric Furnaces, Electric Motors, ALTERNATORS, Generators, Switch Gears

Hot Melt Adhesive Spraying Machine, Back Glue for Book Binding

Muffle Furnace, Apparatus, PLATES, Magnetic Stirrer

Graphite Electrode, Carbon Bushings, graphite bush, Graphite Ingot Mould

Muffle Furnace, biochemical oxygen demand incubator, Heating Mantles