Industrial Furnace Dealers in Bhayandar, Mumbai

• Material: Graphite
• Features: Optimum tensile strength , Highly resistant to extreme temperature,Fine finish
• Bending Strength: 15-30 Mpa
• Bulk Density: 1.70 - 1.85 g/cm3

Light weight ceramic wool insulation (instead of Bricks insulation).The outer casting is made of double walled thick PCRC sheet ,duly painted with attractive stove enamel.Heating elements are made of kanthal A-1 Wire and backed by high temperature cerwool Insulation,which avoids loss of energy, The temperature control unit consists of energy regulator fitted in front of the furnace with two pilot lamps. The apparatus is completed with one pyrometer,thermocouple,silver thermal fuse, and main lead with power plug. To work on 220/230 volts AC or 400/400 volts AC. Temperature: Maximum Temperature : 1000/1200/1400/1500oc Working Temperature : 900/1150/1300/1450oc Size: 100mm*100mm*225mm 1.5kw 125mm*125mm*250mm 2.0kw 150mm*150mm*300mm 3.0kw 125mm*175mm*475mm 4.0kw 175mm*175mm*475mm 4.5kw 200mm*200mm*300mm 5.0kw Note : Larger sizes can be made against order. Optional Accessories : a. Blind controller b. Microprocessor based PID controller c. Thermal chart recorder.

• Color: blue 
• Size: as per client specification
• MODEL NO:  NSS-PAIH-1220
• Product Category: Protection Against Industrial Hazards
• Made In: Germany
• Used:  for viewing kiln glass or furnaces
• Material : Glass

• Brand Name: Combustion
• Voltage: 12 - 24V DC
• Head: 40 Meter
• Pressure: Maximum 15 bar
• Size: 40-45mm

• Maximum Temperature: 1000/1200/1400/1500oc

Light weight ceramic wool insulation (instead of Bricks insulation).The outer casting is made of double walled thick PCRC sheet ,duly painted with attractive stove enamel.Heating elements are made of kanthal A-1 Wire and backed by high temperature cerwool Insulation,which avoids loss of energy, The temperature control unit consists of energy regulator fitted in front of the furnace with two pilot lamps. The apparatus is completed with one pyrometer,thermocouple,silver thermal fuse, and main lead with power plug. To work on 220230 volts AC or 400400 volts AC

• Capacity: 0.17 MKcal/hr to 21 MKcal/hr

Low calorific value gaseous fuels mainly Producer Gas Coal Gas BF Gas can be burnt efficiently,All burners are modulating type with high turn down ratio (1 : 5) and suitable for continuous modulation,Can be supplied for combustion air temperatures upto 400 degree C,Separate fan increases firing flexibility like high furnace back pressure or air pre-heating or no reduction in burner output capacity.

• Type: Muffle Furnace
• Material: metal
• Color: Green, grey
• Condition: New
• Application: Heating Process
• Driven Type: Electric
• Automation Grade: Automatic

Electric Muffle Furnace manufactured by us a rectangular horizontal shaped furnace operated at 230 V, 50 Hz, AC Mains power. Our Muffle Furnace has high quality resistance wires winded around it and the whole is fitted in a metallic chamber and is insulated with Cerwool . The metal cabinet, made of heavy guage is bleakly painted with specially developed heat resistant paint. The unit of Laboratory Muffle Furnace is fitted with a special thermal fuse and Sunvic Energy Regulator for precise controls. The temperature range that it provides is 930°C / 1150°C (1200°C) with the help of Pyrometer or Digital Time Proportional Controller. We are counted among the chief Manufacturers and Exporters of Muffle Furnace in India and have attained a special place for ourselves in the world market. Temp. Range Temp. Range 9300C 9300C 12000C (11500C working) 12000C (11500C working) 12000C (11500C working) Size Rating Pyrometer Digital Rating Pyrometer Digital Temp. 9 x 4 x 4" 1600     2000     10 x 5 x 5" 2000     2500     12 x 6 x6" 3000     3500     18x 9 x 9" 6000     6500    

Lafil industrial burners are pressure jet spill return fully automatic with stepless modulation & operate on oil, gas & dual fuels. They have been designed & manufactured to high standards in order to meet the widest demands. The burners can be used on a wide range of equipment like boilers, hot oil heaters, hot air generators & furnace. High turndown ratios can be achieved without deterioration in combustion quality. Operation can be totally automatic and dual fuel burners can also be supplied for combined fuel burning. Lafil burners are designed for low excess & are totally compatible with on line oxygen trimming systems which regulate excess air thus ensuring good combustion at all loads. Lafil also supply oxygen trimming systems for all suppliers. Custom made burners for fuels like blast furnace gas & other lean gases can be supplied on request. Proper selection of burner is based upon factors such as equipment capacity, furnace pressures, type of load & design of furnace. The burners can be supplied with blower, control panel, oil pumps, oil preheaters, duplex filters & gas trains etc.

I. Neotherm Aulektro cobalt blue glass II. Used for furnace or klin viewing III. Size: 3 ¼” x 4 ½”, 32mm diameter, 53mm diameter, 37mm diameter, etc. IV. Size available as per client requirement. V. Made in Germany. VI. Type: -12 DIN -14 DIN VII. Colour: -Green (B) -Blue (BL) -White (W)l

• POWER RANGE: 1-5KW

Silver melting machine is the process to melt the ferrous and non-ferrous metals for forming applications,Microtech Induction Melting Furnace provides very efficient & time saving melting of metals for various applications

We haved specialized in sphere of MFG. a wide range of High Temp. Oven that are triple walled & fabricated with heavy gauge M.S.& S.S sheet further the inner surface can also made in M.S. or S.S.   Technical specifications • Ovens are triple walled. • Inner chamber made of either M.S. or S.S.304 • Gap between the two walled filled with ceramic insulation to avoid heat of loses with insulation of 150 mm. • Heating Element are made of special type Air heater of S.S. ‘U’ Type tublar heater. • With special type of wirring connection from out side body. • Supplied with air draft motorized blower to circulate uniform temp. Thought out chamber temp. Range 50 ˚C to 400 ˚C with accuracy of ± 2 ˚C controlled by digital temp. Controller cum indicator.

We make Ceramic rectangular Muffles used in Muffle Furnaces. These Ceramic Muffles are used for baking, pre-heating or melting of small objects inside it and other such testing purposes. Working : Heating element in shape of coil or strip is wound on outer side of muffle and object to be melted or heated is kept inside the muffle. The heating coil imparts heat which gets absorbed and transmitted to the object through the muffle. Our Muffles are straight wall muffles enabling in easy installation and better working. These muffles have very high thermal conductivity which enables maximum heat transfer from coils to objects inside muffles and can attain high temperatures without thermal shocks. Size : We manufacture Ceramic Muffles in these sizes: 1. Size - 4" x 4" x 9" long 2. Size - 5" x 5" x 10" long 3. Size - 6" x 6" x 12" long 4. Size - 9" x 9" x 12" long 5. Size - 9" x 9" x 18" long.

We have carried out ISR & LSR of -20 temperature at China by Internal Oil Firing in Furnace. We have performed PWHT of assembly having -20 temperature at China. Year 2010-2011, we have carried out LSR & ISR of 126 cs of 4.5 diameter x 290mm thk (Cr-Mo V material by hybrid method i.e. with combination of gas firing and electrical resistance method. Year 2010-2011, itself we have carried out more than 250 charges of various job in various Furnaces by natural gas.

• Brand Name: Airopower Systems
• Power: 230 V, 50 Hz, AC
• Power Source: Electric
• Max Temperature ( C): 800-900 Degree Celsius
• Type Of Model: Laboratory, Industrial
• Features: Energy Regulator, Temperature Control

• Power: 90 to 450 kw
• Features: Commendable heating and performance

• Material: Stainless Steel
• Voltage: 220V/110V
• Rated Power: 2.5/4 Kw
• Customized: Customized
• Application:: School, Hosipital, Lab, Industry
• Rated Temp: 1000ºC