Industrial Furnace Dealers in Vasai, Mumbai

Electric Tempering Furnace can be combined with Electric Bench Furnaces or Inert Atmosphere Bench Furnaces to produce a space saving, over and under, heat treating and tempering furnace combination. The top chamber with its manually operated vertical lift door can be selected from among four sizes of 11000F and 12000C Bench Furnaces described on Bulletin BF-710 or Inert Atmosphere Bench Furnaces described on Bulletin BF-720. The Quench Tank is a free standing unit available with electric heat.   STANDARD FEATURES   Controls   - Digital, microprocessor based, thermocouple actuated, indicating temperature controller - On-off heat switch - Easy-to-see pilot light   Safely Equipment   Adjustable, thermocouple actuated, manual reset excess temperature controller Separate heating element control contactor Door interlock switch turns off power to heating elements and blower when door is opened; restores power when door is closed   Construction   Recirculation blower located in back wall Heavy gauge aluminized steel cabinet with enamel finish Brushed stainless steel control panel face Designed to support heat treating furnace Well insulated, side-hinged door High temperature alloy heating elements supported by rugged ceramic plates Energy-saving lightweight ceramic fiber insulation reduces operating costs Fast heat-up Heating elements located on sidewall and roof for excellent temperature uniformity throughout workspace Ceramic hearth tray 1 year limited warranty   Optional Quench Tank   Expanded metal loading basket Use with water, oil or synthetic solutions ½ HP direct subway grate basket support Optional electric heat All equipment fully assembled and individually factory tested     STANDARD EQUIPMENT Standard Electrical Characteristics -230 Volts, 3-phase, 60 Hz -Other electrical characteristics available Wall insulation, 7" thick, consisting of -1" of 12500C,8 lbs /ct ceramic fiber blanket -2" of 9250C, 4 lbs /CF ceramic fiber blanket -2" of 10500C 15 lbs/CF block insulation -2" of 6750C rockwool insulation Floor insulation, 6 ½ " consisting of: - 4 ½" of 12500C insulating firebrick - 2" of 6750 C 18 ½ lbs/ cf. block insulation   Electric Models Safety devices as listed on the front of this bulletin. Heating element contactors electrically interlocked with door to shut off power to heaters as door opens and restores power when closed. High temperature alloy coiled wire-heating element supported in alloy rack, Heating elements located in heat chamber upstream of the recalculating blower. Exhaust outlet 4'" diameter. Gas Models - 1,000 BTU natural gas at 2-psig pressures. 1" NP inlet up to 800,000 BTU/HR - Other gas characteristics available Safety devices as listed on the front of this bulletin. Automatic preignition purge period and push button electric ignition contributes to ease of operation. Modulating gas burner fires into chamber upstream of the re-circulating blower. Gas burner protected with electronic flame safety relay. Door interlock switch drives main burner to low fire when door is opened and restores control when door is closed. Exhaust outlet 6" diameter. Furnace shell is made of 3/16" thick steel plate reinforced with structural steel. Doorsill constructed from firebrick to protect furnace during loading. Stainless steel grid at bottom of workspace to distribute loading. Soft insulation on door provides an excellent heat seal by pressing against the vestibule refractory and ½" thick steel front plate. Exterior painted with Trilite Green enamel. Each features completely wired side access control panel assembled on the furnace enclosing terminals for incoming power, temperature controllers, push buttons and pilot lights. Electric Door Door pivots upward above furnace, clearing front for easy loading. In the closed position, full door weight seats door firmly against furnace face. Structural steel pivot arms are supported at furnace sidewalls by bearings and connected to a heavy-duty electro-mechanical actuator. The door is controlled by a switch at the furnace control panel. Air Door Door rises vertically in front of the furnace hanging from heavy-duty roller chain, sprockets, shaft and pillow block bearings. In the closed position, rollers at the sides of the door engage support brackets to force the full door weight against the furnace face. Large diameter air cylinder rotates support shaft to lift the door. The door is controlled by a manual air valve with supply filter, lubricator and regulator. ADDITIONAL EQUIPMENT AVAILABLE Programmable Temperature Controller, microprocessor based, digital indicating, thermocouple actuated, in lieu of standard controller.........................................................PTC3 Recording Thermometer, thermocouple actuated, 24-hour, 10" diameter circular chart used in conjunction with standard controller.............RT Programmable Recording Temperature Controller, microprocessor based, thermocouple actuated, digital display, 24-hour, 10" diameter circular chart, in lieu of standard controller ....................PRTC3 Digital Timing System, incorporated into standard temperature controller, 99 hour 59 minute range, starts timing at temperature set point and shuts down furnace at end of set time .........................DTS3 Shut Down Timer, with continuous "hold" feature 1,5, 10 or 30 hour range.............SDT Batch Timer, for uniformly timing batch operations. Continuous alarm with door interlock; alarms at end of preset time period until door is opened or timer reset. 1,5,10 or 30 hour range........................ BT Inert Atmosphere Construction, available on electric furnaces only, includes continuously welded furnace shell, inert atmosphere gas inlet and outlet, sealed terminal boxes, high temperature door gasket....IAC Inert Atmosphere Inlet Piping, complete with indicating flow control and gas valve. Specify atmosphere...IA

• Rated Power: Standard
• Input Voltage: Standard
• Power: 230 V, 50 Hz, AC Mains
• Brand Name: Hmg (india)
• Max Temperature ( C): 930 degree Celsius / 1150 egree Celsius (1200 degree Celsius)
• Furnace Voltage (V): Standard

This machine is specially designed for Annealing Aluminium Tubes, Complete Fabricated and insulated. The Temperature of 450* C. with conveyor travel of 8mins prior to lacquer process. 10" or 18" conveyor can be design as per client requirement. The drive is through One H.P. motor and double reduction Gear Box.

• Type: Melting Furnaces
• Material: Aluminum
• Application: Melting Furnace
• Weight: 100-300kg
• Color: Black
• Voltage: 110V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

• Capacity: 1kg to 5kg.
• Power Supply: 230 voltage 2kg vat.

The product is use for Melting purpose. We are the manufacturer, exporter and supplier of melting machine . our offer melting machine 1kg to 5 kg. This product is used for Gold and Casting jewelry or old Gold silver studded jewelry . Our melting machine is easy to install & operate To start melting a metal this machine takes 10minutes to reach 0 to 1200 degree temperature.

• Material: Melting inner Titanium Body and outer stainless steel
• Driven Type: Electric Temprature controlled
• Brand Name: Laxmi Automation
• Power Source: ELECTRIC POWER plug
• Material Loading Capacity: 500-1500 kg
• Melting Material: Lead,tin and other metals
• Minimum Order Quantity: 1 Piece

• Material: Stainless Steel
• Color: Grey
• Usage/Application: Construction
• Weight: 1 kg
• Thickness: 2 inch

• Max Temperature (degree Celsius): 500-1000 degree Celsius
• Material Loading Capacity: 0-500 kg, 500-1500 kg, 1500-3000 kg, 3000-5000 kg, >5000 kg
• Power (KW): From 25 kw to 500 kw
• Temperatures Rang: 1100-1500 degree C (2000-2800 degree F)
• Support: Up to 400 degree Celsius

We are a reckoned name in the industry of manufacturing, exporting and supplying a superior quality range of muffle furnace gmp model. The offered muffle furnace is high on demand in the market for its easy usage & smooth operations. This muffle furnace is designed by using finest quality basic material & innovative technology according to the set standards of industry. Besides this, we offer this muffle furnace in various specifications for meeting the needs of customers. Features:  with traceable certificate  provided with digital temperature controller cum indicator with suitable sensor for better accuracy,  indicator lamps, compensating cable and thermal fuse  high grade kanthal a-1 heating elements used  the insulation consists of ceramic wool blanket wound on the muffle, followed by a thick layer of mineral wool thus ensuring minimal skin temperature  the insulation consists of ceramic wool blanket wound on the muffle, followed by a thick layer of mineral wool thus ensuring minimal skin temperature  microprocessor based pid controller with printer and computer interface price on request. product details: temperature range above ambient to + 1180°c temperature accuracy ± 2 °c temperature uniformity ± 0.5 °c specification: inner dimension (wxdxh) external dimension (wxdxh) rating watts 4” x 4” x 9” 23” x 14” x 23” 1750w 5” x 5” x 10” 24” x 15” x 24” 2200w 6” x 6” x 12” 26” x 16” x 25” 3000w 8” x 8” x 12” 32” x 20” x 3” 6000w

• Brand Name: Hmg (india)
• Power: 230 V, 50 Hz, AC Mains
• Features: Pyrometer or Digital Time Proportional Controller
• Max Temperature ( C): 930 degree Celsius / 1150 egree Celsius (1200 degree Celsius)

Weishaupt Burners, Storage Tanks, Danfoss Oil Nozzle, oil nozzle

kiln burner, Fabrication Services, Abrasive Sheets, duel fuel burner

Muffle Furnace, Dispensing and Sampling Booth, Dynamic Pass Box

Muffle Furnace, Apparatus, u v cabinet, Oil Bath, Magnetic Stirrer

1150c Cupellation Furnace

powder curing oven, MS Sheet Metal Work, sheet metal components job work

Industrial Furnaces