Industrial Heaters Dealers in Andheri East, Mumbai

• Condition: New

Faster Heat Transfer with flat cross section Two standard diameters, 1.5 mm and 1.8mm tube (1.40mm x 2.20mm) (0.059” & 0.07”) Standard wattage available 149 watt & 268 Staggered cold leads of 5” & 7” watt on 240 volt Std. size available ID 19mm x 30 & ID 22mm x 30 Robust Construction in Micro Tube Dia – 1.50 Equipped with a special cover for easy fitment & 1.80mm over circular parts Axial Clamp - Front end loading adjusting saves hours of downtime in moulds

Delighting our customers with our excellent performance, we have cemented our status as a top figure in the industry. As a Manufacturer and Supplier, we proudly present Titanium Electroplating Immersion Heaters to our customers. We undergo a thorough process of vendor selection to procure raw materials only from the vendors who never fall short of delivering constant and excellent quality. Our industrial heaters are known for their suitable application in processing of industrial fluids. These are available in different sizes, shapes and heating configurations as per customers demand. Description : Industrial Heaters. In Titanium , SS 316 & 304, Glass Heaters , Lead ling Heaters. Industrial PT-100 Smiplex Sensors. In Titanium And SS Alloys.   For More Information Please Visit On : WWW.SAITITANIUM.IN

Warning: For use with non-combustible welding gases only. Misatu Gas Heaters are intended for use on 42V115V230V, 5060 Hz, single phase AC only. Since they are not insulated for outdoor use, the heaters must be protected from moisture and weather or climatic conditions that could cause electrical equipment to become a hazard. Use only with 3-wire grounded, electrical extension cord and socket.

We are chiefly engaged in the manufacturing, exporting, and supplying of steam water heater all across the globe. Used to produce hot water by using steam, our steam water heater caters to food, pharmaceutical, chemical, and process industries. Our steam water heater offers smooth condensation to eliminate or avoid water hammering, vibrations, and noise, unlike conventional systems. features of steam water heater simple & compactavailable in all sizesoffers low pressure drophave low installed weighteliminates temperature gradientsfacilitates practically no steam wastageeliminates excessive vibration and noiseoffers low installation and operating costhave no moving parts and hence no maintenanceallows representative sampling for finer temperature control

The CAHP heat pump water heater is an integrated system that utilises the heat pump technology to provide more efficient way to heat water with electricity. CAHP pulls heat from surrounding air and deposits the heat into the tank. The end result is very efficient production of hot water with cooler and dehumidified air as a welcome by-product. Suitable for villas and light commercial applications

This Heavy Duty Robust Machne Is Specially Designed For Production Of Two Ply Corrugated (Roll) By Feeding Two Reels Of Craft Paper One As Media Paper And Other As Liner Paper Simultaneously. This Versatile Machine Has Two Sets Of Flute Rollers Which Can Be Alternatively Used. Changing Of Flute Rollers Is Hydraulically And Takes No Time. Flute Rollers Are Mounted On Spherical Bearings. The Machine Is Equipped With Hydraulic Power Pack Reel Stand Upto 1mtr Reel Diameter, Fingerless System Shall Optionaly Be Attached With The Machine.

we offer induction heating. induction heating is a method of providing fast, consistent heat for manufacturing applications which involve bonding or changing the properties of metals or other electrically-conductive materials. the process relies on induced electrical currents within the material to produce heat. although the basic principles of induction are well known, modern advances in solid state technology have made induction heating a remarkably simple, cost-effective heating method for applications which involve joining, treating, heating and materials testing.

Tubular Heaters are ideal for rough daily use, reliable and easy to maintain. Formed tubular heaters are available in round and square cross sections and various sizes and shapes as per manifold's design. These types of heaters are made of stainless steel or Nicolay with sheath diameter of 8 mm. The heating wire is helical wounded and made of high temperature resistant Ni-Cr alloy and the insulation consists of Magnesium Oxide (MgO). The connection ends are sealed with sealing components to protect the heater from moisture. Heaters are available in square and rectangular cross sections and various sizes as per our Hot Tip Nozzles / Hot Sprue Series Model.

We offer Low Density Cartridge Heaters for our esteemed clientele. The Low Density Cartridge Heater consists of a helically wound resistance round steatite ceramic insulator. In addition, specially selected high purity MgO is used to fill the space inside the ceramic insulator to increase thermal conductivity, dielectric strength, and provide longer operating life to the heater. The Low Density Cartridge Heaters provides resistance to heat oxidation up to 10000F (5400C). Applications Packaging machineryShoe machineryHot stamping and liquidsLabeling machines Resistance Tolerance : NEMA standard plus 10% minus 5% Wattage Tolerance : NEMA standard plus 5% minus 10%

Xiconhave executed Electrical Heat Tracingof Pipeline, Tanks, Pumps, Instruments, and Vessels including Glass Lined Equipments. Over 6,00,000 Mtrsof tracers are in operation in India alone. Xicon have also executed complete Turnkey Jobs such as Handling of Petroleum Jelly from Drum to the user facility, which involves Drum Heating, Cartridge Heating in the Tanks, Trace Heating onthe Pipeline. This job also includes Lifting, Handling and Tilting of the drum in to Storage Tanks.

induction heater for fast, safe & economical heating of beatings. Available in 4 models pih- 2001 power 3.5/4.0 kva controls micro -controller bassed pih- 2001 power 6.0/8.0 kva controls micro -controller bassed pih- 2001 power 11/12 kva controls micro -controller bassed pih- 2001 power 25.0 kva controls micro -controller bassed

• temperature: 0-2°C

Direct Contact Heater is an alternative heat exchanger to plate and tubular heaters. contact heaters. DCH will work with counter current heat exchange principle. DCH has high heat transfer co-efficient. In the DCH latent heat and part of sensible heat will be utilized for heating duty. DCH will work with an approach temperature of 0-2°C, whereas tubular heaters and plate heat exchangers will work with 5-7° C approach temperature. Counter current operation and high heat transfer co-efficient. Can be run with bled vapours and saving of exhaust steam. Effective utilization of the latent heat and part of the sensible heat. Suitable for heating with low pressure and temperature vapours. No condensate extraction system is required. Low head juice pumps and less power consumption.

• Air-cooled systems: Up to 400°F
• Water-cooled systems: Up to 1500°F
• Use: Generally used in Boiler industry for heating P91 pipes, header and stub.
• Features: Stress relieving, Manufactured using advanced technology, Use a non-contact method of electrically heating conductive material.

• Diameter: 25mm – 65mm

Mica Nozzle Heaters are designed and manufactured with more than 25 years of practical experience, for superior performance and life expectancy., As a manufacturer specialized in industrial electric heating elements & the desire to provide quality products and services to our customers both OEM’s & End Users, Vinman specializes in designing Mica Nozzle Heaters, Ceramic Band Heaters , Mica Band Heaters & Strip Heaters to your exact specifications. Nozzle Heaters are manufactured with high temperature oxidation metal sheath and high grade mica insulation resistant to moisture and high temperatures.

• sizes namely: 35, 50 & 100 kgs/hr

Electrical hot water generator Neotech's Nanomatic' Steam Generators are offered in 3 sizes namely 35, 50 & 100 kgshr, These units are offered in compat design & are offered with imported World Class Monoblock Burners. These Boilers are extremely efficient & work in the vicinity of 90 % efficiency.

• Model: PH-CS300
• Volume: 300 Ltr
• Max load volume: 240 Ltr
• Heating power: 24 kW
• Temperature: 0-300℃ adjustable

Easy to install and operate. Uniform Heating. Large heating area. Short boiling time. Easy control of heating temperature. Mixing scrapers can touch the bowl thoroughly avoids burning. Stirring speed is adjustable. Corrosion & abrasion resistance. Longer service life.

Inventum Induction Heater Model HIR-2540 is specially designed to dismount and mount the Inner Races of Cylindrical Roller Bearings used on the Axles of Railway Rolling Stock and in Traction Motors. The equipment can also be used for similar applications by other industries.When a job is heated with the induction coil it acquired magnetism strong enough to attract iron particles, iron dust etc. To deal with this phenomenon, it is necessary to eliminate the residual magnetism after heating. The design of Inventum Induction Heater Models HIR-2540 permits fast demagnetisation by use of the heating coil itself. The Induction Coil can be used for demagnetisation as well as heating.

induction hardening equipment, rotary carburising furnace, Tempering Machine

we are offering Hot Runner Heaters & Thermocouple. Tubular Heaters are ideal for rough daily use, reliable and easy to maintain. Formed tubular heaters are available in round and square cross sections and various sizes and shapes as per manifold's design. These types of heaters are made of stainless steel or Nicolay with sheath diameter of 8 mm. The heating wire is helical wounded and made of high temperature resistant Ni-Cr alloy and the insulation consists of Magnesium Oxide (MgO). The connection ends are sealed with sealing components to protect the heater from moisture.

We are recognized as one of the trusted Ceramic Band Heater Manufacturers, Exporters and Suppliers from Mumbai (Maharashtra). The Ceramic Band Heaters design consists of a helically wound resistance coil made from 80/20 nichrome wire, evenly stretched and precisely strung through a specially designed ceramic insulating bricks forming a flexible heating mat and its exterior part is coated with stainless steel sheet. Thanks to high conductive ceramic, long service life, fast and simultaneous dispersion of heat is realized by installing chrome-nickel wire properly. Thanks to conservation of heat achieved by ceramic fibres conservation of energy up to 25% to 45% can be obtained. Glass fibre cable and armoured cable whose exterior surface is coated with stainless steel upon request these heaters can be manufactured in special dimensions and values. SpecificationsElectricalResistance + 10% -5%Wattage + 5% -10%Voltage 220V AC to 480V ACMaximum Watt 50 watts / sq. inch.Maximum Temp.800o CDimensionalMinimum Dia. 38 mmMinimum Width 25 mmOverall Thickness12-15 mmWidth - Normal Multiple of 15 + 6mmStd. gap between edges 5 to 10 mm

Finned Heaters, Industrial Heaters, Band Heaters, Cartridge Heaters

This is an advanced version of perforated ceramic heaters. This works on a principle of forced convection for quicker response to overheating and accurately controls temperature of barrel. Mounting Arrangement: Separate blower is fitted on the bottom of the flange of heater. Heater along with blower is mounted on an aluminum perforated ring which in turn, is mounted on barrel. Aluminum ring provide air distribution channel. Function: As soon as barrel exceeds set temperature, blower is turned on. Excess heat from barrel is carried away by the air through forced convection. Via rapid heat up and accelerated cool down feature, it responses very quickly in case of even a minute deviation from set temperature. Thus it reduces thermal shocks, material burn-out problem and maintenance related problems.

Induction heating is a method of providing fast, consistent heat for manufacturing applications which involve bonding or changing the properties of metals or other electrically-conductive materials. The process relies on induced electrical currents within the material to produce heat. Although the basic principles of induction are well known, modern advances in solid state technology have made induction heating a remarkably simple, cost-effective heating method for applications which involve joining, treating, heating and materials testing.