Industrial Heaters Dealers in Andheri West, Mumbai

Its controls are microprocessor based. It weights about 47 kg. and can be easily carried to the site of operation, using special die-cast handle provides on both sides. It can heat a typical bearing of 13 kg. to 100oC in 3 minutes. HIB-02 consists of the main body Induction Heater and a separate handheld HIB Control Box. This HIB Control Box is connected by a 2 meter long cable to the unit and hence the unit can be operated from a convenient location.

This is an advanced version of perforated ceramic heaters. This works on a principle of forced convection for quicker response to overheating and accurately controls temperature of barrel.Mounting Arrangement: Separate blower is fitted on the bottom of the flange of heater. Heater along with blower is mounted on an aluminum perforated ring which in turn, is mounted on barrel. Aluminum ring provide air distribution channel.

Apple Far Infrared Sauna Working Principle Apple Far-Infrared Sauna is an integrated, multi-functional and delux facility for medicare and recreation, which incorporates the advantages of both sunlight bath and sauna all in one. The far infrared ray is its major energy. The wavelength of far infrared ray is 5.6- I 5gin which is close to the bodys own radial that can be absorbed easily. The far infrared ray can penetrate 40mm deep into human skin, so the recipient could receive an infrared massage, making cell tissues resonant, accelerate blood circulation, eliminate impurities, resulting in both bio-thennal effect and physical effect. Thus, health will be improved.  

• Finishing: Stainless Steel
• Available: 6kW and 8kW

The Steamy heater has a built-in steam generator which can be programmed to provide four different sauna climates - Soft Steam, Soft Bath, Soft Sauna and Normal Sauna - useful for those who prefer their sauna at lower temperatures. A dedicated controller has built-in protection to prevent steam temperature rising too high and will allow the sauna timber to dry after use. 6 - 8KW single or three phase connection. Supplied with remote control.

We are recognized as one of the trusted Ceramic Band Heater Manufacturers, Exporters and Suppliers from Mumbai (Maharashtra). The Ceramic Band Heaters design consists of a helically wound resistance coil made from 80/20 nichrome wire, evenly stretched and precisely strung through a specially designed ceramic insulating bricks forming a flexible heating mat and its exterior part is coated with stainless steel sheet. Thanks to high conductive ceramic, long service life, fast and simultaneous dispersion of heat is realized by installing chrome-nickel wire properly. Thanks to conservation of heat achieved by ceramic fibres conservation of energy up to 25% to 45% can be obtained. Glass fibre cable and armoured cable whose exterior surface is coated with stainless steel upon request these heaters can be manufactured in special dimensions and values. SpecificationsElectricalResistance + 10% -5%Wattage + 5% -10%Voltage 220V AC to 480V ACMaximum Watt 50 watts / sq. inch.Maximum Temp.800o CDimensionalMinimum Dia. 38 mmMinimum Width 25 mmOverall Thickness12-15 mmWidth - Normal Multiple of 15 + 6mmStd. gap between edges 5 to 10 mm

• Application: Industrial Use

Ceramic bands are made of an electrical resistance helical coil, which is inserted around a series of interlocking steatite bricks of 1100°c having physical and die electric strength and good thermal conductivity, covered with 4mm insulation and then wrapped in sheet metal. The resistance wire that converts electrical energy to thermal energy is a nickel-chromium alloy of 80% nickel normally termed as Ni-Chrome. The sheet metal is stainless steel ( chrome – nickel) for temp upto 700°c. Features Designed as per customer specifications Variety of termination options Available in one or two piece construction Temp upto 700 deg C S.S. braided termination Metal covering Application Injection moulding Blow Moulding Extrusion Pipe and drum heating

We are a prominent Manufacturer, Exporter & Supplier of Industrial Drum Heater. The Industrial Drum Heater is engineered to perfection by our team of proficient technicians. The Industrial Drum Heater is known for its robust construction, durability, efficient performance and long working life. We supply the Industrial Drum Heater in various parts of the world at the most reasonable prices. Power : 440 V, 50 Hz, 3-� power supply. On demand half size drum heater could be made Construction : This industrial drum heater ( vertical model) has a well type, double walled construction. The Inner chamber is made of MS with a heat resistive silver paint finish and the outer chamber is also made of MS with a powder coat finish. The industrial drum heater has an electrical heating system, suitable for heating 200ltrs standard size drum. The drum heater is made into 2 semicircular halves, which are joined at one end by heavy duty hinges & clamps and at the other end by a special press fit adjustable lock, with the control panel on one half heater & heater connector junction box on the other half. A SS �U� type Enconel heater of suitable capacity is used as the heating element for uniform distribution of heat. The maximum achievable temperature is 250oC. A digital microprocessor PID temperature controller cum indicator with PT-100 sensor controls the heating process. The unit is easily moveable on its costar wheels.

Cast heaters are made of formed tubular elements cast into aluminum, cast iron or bronze. Cast heaters can be made in a variety of shapes and sizes to meet specific applications. Cast heaters can also be manufactured with cooling arrangements to minimize temperature overshoot.

• Material: Furnace oil.
• Viscosity: 1500 sec.
• Capacity: 1 KW to 800 KW.
• Oil Flow: 10 to 3000 lph.

We are offer Industrial Water Immersion Heater. We have numerous models, each having a different specification.

• Application: Hot runner manifolds. , Water heaters . Domestic appliances, Industrial Oven etc .
• Features: Long life , Durable, Perfect finish .
• diameter: 6.80mm, 8.00mm , 10.70mm.

The company is named as a prominent Laboratory Heating Mantles Manufacturer and Supplier, located in India. The Laboratory Heating Mantles, that we provide, are known for their excellent efficiency and lower maintenance. Our Laboratory Heating Mantles have been proved to be cost effective in nature and thus are highly demanded by the clients. Technical Specifications Aluminum body with epoxy powder coat finishFiber glass net with long-lasting nichrome heating elementHigh-grade glass wool insulationSuitable for round bottom flaskEnergy regulator with corresponding lamp indicator to control the temperatureTemperature Range : Up to 400 degrees CelsiusWorking Size : 50 ML, 100 ML, 250 ML, 500 ML, 1 liter, 2 liters, 3 liters, 5 liters, 10 liters, 20 liters, 50 liters, 100 liters, 200 liters

No, Heat tracing is primarily used for temperature maintenance. Heat-ups in short periods of time (minutes to a few hours) will most likely require more heat than that needed to maintain the temperature at the desired temperature above ambient. You have to go for heating panelsheaters.

air duct heaters, Porcelain Heaters

Bearing Heater, Induction Heater, Induction Heating Equipment

High Density Cartridge Heaters, Heating Elements, electric immersion heater

Oil Heater, Beauty Products, clips, Facial Sauna, wax heater

Shot Glass Heater, key chains printing services, glass mug

industrial electric heaters, industrial electric equipments

rod heater, furnace oven, Pencil Heaters, Ring Heater

Industrial Heaters, Carbon Brushes, Brush Holders, commutator

LED Lights, Solar Geyser, Solar Products, Solar Street Light

Heating Mantles, biochemical oxygen demand incubator, Hot Plates, Incubators

Heating Mantle, Apparatus, PLATES, Magnetic Stirrer

steam radiators, Thermic Fluid Radiator .

Video Door Phones, CCTV Camera, Epabx Systems, home networking