Industrial Heaters Dealers in Jogeshwari East, Mumbai

Medium wave IR heaters are manufactured and supply superior quality medium wave infrared heater that consists of a helically wound resistance coil housed in a pure vitreous silica fused quartz tube. The quartz tubing is terminated with ceramic insulating caps that are specially designed to allow the quartz tubing to breathe. The ceramic caps are tightly fastened to the quartz tube with high temperature cement that allows the quartz to breathe. Made of high quality material, these are superior in performance and offer long serving life. Features Quartz Infrared Heater is available in diameters of 8, 10, 12, 15 and 19 mm Available in lengths from 300 to 1500 mm Can be used only in horizontal position Fitted with specially designed heating coil to ensure longer life, Least maintenance required Available in clear and milky tubes Application Shrink Packaging Machines Lamination Industries Drying Textiles Curing Rubber

Inventum Induction Heater Model HIR-2540 is specially designed to dismount and mount the Inner Races of Cylindrical Roller Bearings used on the Axles of Railway Rolling Stock and in Traction Motors. The equipment can also be used for similar applications by other industries.When a job is heated with the induction coil it acquired magnetism strong enough to attract iron particles, iron dust etc. To deal with this phenomenon, it is necessary to eliminate the residual magnetism after heating. The design of Inventum Induction Heater Models HIR-2540 permits fast demagnetisation by use of the heating coil itself. The Induction Coil can be used for demagnetisation as well as heating.

SERIES FROM 7 TO 14 FINS bullet MAXIMUM POWER FROM 1000w TO 2500w. bullet 3 HEAT SETTINGS. bullet ADJUSTABLE TERMOSTAT CONTRAL. bullet OVERHEAT PROTECTION. bullet OPERATION SWITCHES WITH INDICATOR LIGHT. bullet PRESSURE TESTED FOR SAFETY. bullet SMOOTH CASTORS FOR EASY MOVEMENT. bullet WITH CORD STORAGE. bullet QTY OF CONTAINER: bullet 7 FINS: 40’1300; 40’HQ1540 bullet 9 FINS: 40’1070; 40’HQ1270 bullet 11 FINS: 40’910; 40’HQ1060

We are best manufactures for Immersion Heaters. Immersion Heater are made in Tubular and cartridge types. They can be manufactured with threaded bushings of flanges. Different sheath materials like stainless steel, Incoloy , Copper, Titanium are used depending on application requirements. Immersion heaters can be supplied with a vareity of diferent terminal enclosures like general purpose enclosure, Weather proof enclosure & Flameproof enclosure. Our company also offers a wide range of flanged immersion heaters, which provide appropriate heater size-to-application and fittings. These heaters solves purpose of various industrial needs. The flanged immersion heaters are perfectly designed to provide proper element spacing to maximize heater performance and the life.

• Type: Evacuated
• Certification: CE Certified
• Warranty: 1 Year
• Weight: 10-100kg
• Application: Water Heating
• Automatic Grade: Automatic
• Housing Material: Metal

Buy high performance, easy to install and low maintenance Evacuated Tube Collector Solar Water Heater (500 LPD) from us at competitive prices. Reckoned for its user-friendliness, high output and low power consumption, our Evacuated Tube Collector Solar Water Heater (500 LPD) is of unmatched standards. We can provide the customized version of the model as well.

We are a prominent Manufacturer, Exporter & Supplier of Industrial Drum Heater. The Industrial Drum Heater is engineered to perfection by our team of proficient technicians. The Industrial Drum Heater is known for its robust construction, durability, efficient performance and long working life. We supply the Industrial Drum Heater in various parts of the world at the most reasonable prices. Power : 440 V, 50 Hz, 3-� power supply. On demand half size drum heater could be made Construction : This industrial drum heater ( vertical model) has a well type, double walled construction. The Inner chamber is made of MS with a heat resistive silver paint finish and the outer chamber is also made of MS with a powder coat finish. The industrial drum heater has an electrical heating system, suitable for heating 200ltrs standard size drum. The drum heater is made into 2 semicircular halves, which are joined at one end by heavy duty hinges & clamps and at the other end by a special press fit adjustable lock, with the control panel on one half heater & heater connector junction box on the other half. A SS �U� type Enconel heater of suitable capacity is used as the heating element for uniform distribution of heat. The maximum achievable temperature is 250oC. A digital microprocessor PID temperature controller cum indicator with PT-100 sensor controls the heating process. The unit is easily moveable on its costar wheels.

• Type: Tubular Heaters
• Material: Aluminium, Copper, Metal, Tungsten
• Certification: CE Certified, ISO 9001:2008
• Color: Brown, Grey, Sliver
• Voltage: 110V, 220V, 380V, 440V
• Automatic Grade: Manual
• Warranty: 1year, 2years
• Driven Type: Electric

Excel Perforated Ceramic heater, super-efficient and economical perforated Ceramic heater bands are designed for use on extrusion machinery or on any heat/cool operation. Perforated Ceramic heater bands feature 60% open perforated metal sheath, which assures maximum surface area exposure. They also provide the user with a more economical operation, via a rapid heat-up and cool-down feature include lower cost, replaceable heaters, low maintenance and close temperature control. They also provide the user with a more economical operation, via a rapid heat-up and cool-down feature include lower cost, replaceable heaters, low maintenance and close temperature control. Use of special ceramic material “steatite” with thermal conductivity. Perforated ceramic heater bands are available in various sizes to either accommodate new designs or to replace less efficient, more expensive cast aluminum heaters.

S M Enterprise manufactures custom built finned air and unfinned air heater banks to meet specfic requirements. A wide range of wattage rating, sheath materials, terminal housing & control features are available for all types of requirements.A wide spectrum of air heaters are available in our product fold. These heaters also provide freeze protection and humidity control, along with equipment protection. Various standard parameters for our air duct heaters include:Maximum air temperatureMaximum air flowHeating capacitMaximum air temperature is that temperature of air exiting from the heater. Maximum air flow is the maximum flow of air passing through the heater. Heating capacity is the wattage which the heater can deliver. Applications High temperature air ducts, Recirculation Ovens, Drying Moisture laden air, Processes requiring heated air, Resistive load banks etc.

• Operating Voltage: 415 V AC 3 Phase
• Max. Watt Density: 2.5 to 3 Watts/sq. inch
• Max. Operating Temperature: 180 C

Thermo Hopper heating systems play an important role in the removal of fly ash from precipitators and bag filter hoppers. The hopper heater is designed to preheat the hopper to prevent moisture condensate from collecting in it during startup conditions. In addition, they maintain the hopper and fly ash at temperatures above the flue gas acid dew point during normal operating conditions

• Specialities: Reliable, safe & clean.,Electrical - Inductive - Resistance heating principle.

Inline induction wire preheater is used to heat the wire prior to extrusion coating processing etc. ideally suitable for Cable and Wire Industry. It improves the adhesive coating of Insulating material on conductor as the temperature of the conductor remains same throughput the run and the heat flow is even through out the wire to assure that no cold patches occur at the any line speed hence avoid the wastage of costly raw material gives high quality and product and higher product speed. It works on electrical inductive resistance heating principle assure no current flow to other wire line equipment. The heat on the wire is applied evenly at all the operating should regardless of wire diameter. A sold state thyristorised control with line speed Encoder feedback provides correct secondary voltage as per desired setting. It also eliminates wire burn out during stoppage. Line Voltmeter Power ON Heating on indication is provided with Auto Manual selection and heating potentiometer for easy operation and quicker setting. Current limit circuit protects the Preheated Coil from overloading. The entire unit is self-contented Powder coated with glass window cabinet and doesn't require any foundation footing

• Type: Hopper Heaters
• Application: Industrial Use
• Voltage: 220, 24V, 480V, 110V, 12V
• Condition: New
• Power: 1-1000 W
• Power Type: AC
• Heater Material: Fibreglass, Silicon, metal

celsun heating pads are designed to cover the maximum area of the vessel. Hence it gives uniform heat transfer throughout the surface, avoiding any hot-spot or carbonization of the content. Temperature is uniform and can easily be controlled. The elements are designed to work in black – heat region and closely follow the vessel surface temperature. our modular design provides the: • easiest and lowest cost-of-installation • most cost-effective and energy-efficient heat possible across a large surface area construction details: the electrical heating pad consists of nichrome wire heating elements insulated with two braids of glass-fiber yarn and impregnated with class f varnish. The element is spread over closely woven glass cloth carrier at a uniform pitch and again sandwiched between two layers of glass cloth. the lead wires, comprising of fiberglass and teflon insulated copper wire, are taken out from one side. Eyelets are provided for fixing the pads on vessel. Tying laces may also be provided for smaller size.

We present a complete range of highly durable Industrial Heaters. Our international quality Industrial Heaters are far famed for its superb performance. These Industrial Heaters are empowered with Hi tech features, which makes it a unique option for all quality sensuous customers. We also supply and export these highly reliable Industrial Electric Heaters on very huge scale. Our Industrial Heaters are considered to be one of the most cost effective solution available in entire marketplace.

• Application: Hot runner manifolds. , Water heaters . Domestic appliances, Industrial Oven etc .
• Features: Long life , Durable, Perfect finish .
• diameter: 6.80mm, 8.00mm , 10.70mm.

We are recognized as one of the trusted Ceramic Band Heater Manufacturers, Exporters and Suppliers from Mumbai (Maharashtra). The Ceramic Band Heaters design consists of a helically wound resistance coil made from 80/20 nichrome wire, evenly stretched and precisely strung through a specially designed ceramic insulating bricks forming a flexible heating mat and its exterior part is coated with stainless steel sheet. Thanks to high conductive ceramic, long service life, fast and simultaneous dispersion of heat is realized by installing chrome-nickel wire properly. Thanks to conservation of heat achieved by ceramic fibres conservation of energy up to 25% to 45% can be obtained. Glass fibre cable and armoured cable whose exterior surface is coated with stainless steel upon request these heaters can be manufactured in special dimensions and values. SpecificationsElectricalResistance + 10% -5%Wattage + 5% -10%Voltage 220V AC to 480V ACMaximum Watt 50 watts / sq. inch.Maximum Temp.800o CDimensionalMinimum Dia. 38 mmMinimum Width 25 mmOverall Thickness12-15 mmWidth - Normal Multiple of 15 + 6mmStd. gap between edges 5 to 10 mm

• Power: 12V 40W / 24V 40W
• Size: 6*15mm, 6*20mm, 6*30mm
• Lead wire length: 1M or 2M
• Material: stainless steel
• Weight: 100 g
• Item Code: OMP-3D019

The company is named as a prominent Laboratory Heating Mantles Manufacturer and Supplier, located in India. The Laboratory Heating Mantles, that we provide, are known for their excellent efficiency and lower maintenance. Our Laboratory Heating Mantles have been proved to be cost effective in nature and thus are highly demanded by the clients. Technical Specifications Aluminum body with epoxy powder coat finishFiber glass net with long-lasting nichrome heating elementHigh-grade glass wool insulationSuitable for round bottom flaskEnergy regulator with corresponding lamp indicator to control the temperatureTemperature Range : Up to 400 degrees CelsiusWorking Size : 50 ML, 100 ML, 250 ML, 500 ML, 1 liter, 2 liters, 3 liters, 5 liters, 10 liters, 20 liters, 50 liters, 100 liters, 200 liters

Apple Far Infrared Sauna Working Principle Apple Far-Infrared Sauna is an integrated, multi-functional and delux facility for medicare and recreation, which incorporates the advantages of both sunlight bath and sauna all in one. The far infrared ray is its major energy. The wavelength of far infrared ray is 5.6- I 5gin which is close to the bodys own radial that can be absorbed easily. The far infrared ray can penetrate 40mm deep into human skin, so the recipient could receive an infrared massage, making cell tissues resonant, accelerate blood circulation, eliminate impurities, resulting in both bio-thennal effect and physical effect. Thus, health will be improved.  

We are offer Industrial Water Immersion Heater. We have numerous models, each having a different specification.

• Finishing: Stainless Steel
• Available: 6kW and 8kW

The Steamy heater has a built-in steam generator which can be programmed to provide four different sauna climates - Soft Steam, Soft Bath, Soft Sauna and Normal Sauna - useful for those who prefer their sauna at lower temperatures. A dedicated controller has built-in protection to prevent steam temperature rising too high and will allow the sauna timber to dry after use. 6 - 8KW single or three phase connection. Supplied with remote control.