Industrial Heaters Dealers in Marol, Mumbai

• Voltage: Upto 415 V
• Surface Temperature: 600OC Maximum

Plain tubular heaters are available in straight lengths or bent as per customers requirement with threaded stud connection at both ends. Finned tubular heaters have enlarged surface area to help faster dissipation of heat.

Warning: For use with non-combustible welding gases only. Misatu Gas Heaters are intended for use on 42V115V230V, 5060 Hz, single phase AC only. Since they are not insulated for outdoor use, the heaters must be protected from moisture and weather or climatic conditions that could cause electrical equipment to become a hazard. Use only with 3-wire grounded, electrical extension cord and socket.

We are a prominent Corrugation Heaters Manufacturer, Exporter & Supplier. The Corrugation Heater is widely used to heat the rolls of the Corrugation machine, which in turn forms flute on the paper. In addition, the Corrugation Heater are available in a diverse range of models and specifications. Avail the Corrugation Heater from us at competitive market prices.

Tubular Heaters are ideal for rough daily use, reliable and easy to maintain. Formed tubular heaters are available in round and square cross sections and various sizes and shapes as per manifold's design. These types of heaters are made of stainless steel or Nicolay with sheath diameter of 8 mm. The heating wire is helical wounded and made of high temperature resistant Ni-Cr alloy and the insulation consists of Magnesium Oxide (MgO). The connection ends are sealed with sealing components to protect the heater from moisture. Heaters are available in square and rectangular cross sections and various sizes as per our Hot Tip Nozzles / Hot Sprue Series Model.

induction heater for fast, safe & economical heating of beatings. Available in 4 models pih- 2001 power 3.5/4.0 kva controls micro -controller bassed pih- 2001 power 6.0/8.0 kva controls micro -controller bassed pih- 2001 power 11/12 kva controls micro -controller bassed pih- 2001 power 25.0 kva controls micro -controller bassed

• Air-cooled systems: Up to 400°F
• Water-cooled systems: Up to 1500°F
• Use: Generally used in Boiler industry for heating P91 pipes, header and stub.
• Features: Stress relieving, Manufactured using advanced technology, Use a non-contact method of electrically heating conductive material.

• Condition: New

• mass: upto 600 kgs

Induction Heater Model 'HIB-04' is the latest addition to the range of 'HIB' Series Induction Heaters manufactured by Inventum. For over a decade Inventum has been supplying 3 models i.e. 'HIB-01' (3-3.5 kVA), 'HIB-02' (6-8 kVA) and "HIB-03' (11-13 kVA) to the industries. Keeping in view the special requirement of a few important customers, Inventum has now developed the Model 'HIB-04' (22-25 kVA unit) to heat larger size bearings and other components having mass upto 600 kgs.

induction hardening equipment, rotary carburising furnace, Tempering Machine

We are chiefly engaged in the manufacturing, exporting, and supplying of steam water heater all across the globe. Used to produce hot water by using steam, our steam water heater caters to food, pharmaceutical, chemical, and process industries. Our steam water heater offers smooth condensation to eliminate or avoid water hammering, vibrations, and noise, unlike conventional systems. features of steam water heater simple & compactavailable in all sizesoffers low pressure drophave low installed weighteliminates temperature gradientsfacilitates practically no steam wastageeliminates excessive vibration and noiseoffers low installation and operating costhave no moving parts and hence no maintenanceallows representative sampling for finer temperature control

Delighting our customers with our excellent performance, we have cemented our status as a top figure in the industry. As a Manufacturer and Supplier, we proudly present Titanium Electroplating Immersion Heaters to our customers. We undergo a thorough process of vendor selection to procure raw materials only from the vendors who never fall short of delivering constant and excellent quality. Our industrial heaters are known for their suitable application in processing of industrial fluids. These are available in different sizes, shapes and heating configurations as per customers demand. Description : Industrial Heaters. In Titanium , SS 316 & 304, Glass Heaters , Lead ling Heaters. Industrial PT-100 Smiplex Sensors. In Titanium And SS Alloys.   For More Information Please Visit On : WWW.SAITITANIUM.IN

EXCEL’s  HI-DENSITY cartridge heaters are among the most versatile and widely used cartridge heaters throughout the industry. They are valuable for alleviating problems created by high watt densities, high wattage, excessive vibration, poor fit, or where short heater life is a constant problem. Widely used to heat the plastic injection molds, dies, hot plates, platens and many more applications Designed for High watt density The use of high purity MgO insulation assures high dielectric strength fast heat transfer efficiency Swaging increases the high thermal conductivity and uniform heating Shock and vibration resistant Available also with built in thermocouple They are economical & versatile A full range of sizes are readily  available from stock

We are a prominent manufacturer and suppler of an extensive range of Mica Heater that is widely used for various applications such as heating the nozzle of plastics processing, extrusion machine, rubber vulcanizing machine and injection molding machine. Our range of product is well acknowledged among the clients for its innovative designs, long service life and cost effectiveness.

We are recognized as one of the trusted Ceramic Band Heater Manufacturers, Exporters and Suppliers from Mumbai (Maharashtra). The Ceramic Band Heaters design consists of a helically wound resistance coil made from 80/20 nichrome wire, evenly stretched and precisely strung through a specially designed ceramic insulating bricks forming a flexible heating mat and its exterior part is coated with stainless steel sheet. Thanks to high conductive ceramic, long service life, fast and simultaneous dispersion of heat is realized by installing chrome-nickel wire properly. Thanks to conservation of heat achieved by ceramic fibres conservation of energy up to 25% to 45% can be obtained. Glass fibre cable and armoured cable whose exterior surface is coated with stainless steel upon request these heaters can be manufactured in special dimensions and values. SpecificationsElectricalResistance + 10% -5%Wattage + 5% -10%Voltage 220V AC to 480V ACMaximum Watt 50 watts / sq. inch.Maximum Temp.800o CDimensionalMinimum Dia. 38 mmMinimum Width 25 mmOverall Thickness12-15 mmWidth - Normal Multiple of 15 + 6mmStd. gap between edges 5 to 10 mm

Apple Far Infrared Sauna Working Principle Apple Far-Infrared Sauna is an integrated, multi-functional and delux facility for medicare and recreation, which incorporates the advantages of both sunlight bath and sauna all in one. The far infrared ray is its major energy. The wavelength of far infrared ray is 5.6- I 5gin which is close to the bodys own radial that can be absorbed easily. The far infrared ray can penetrate 40mm deep into human skin, so the recipient could receive an infrared massage, making cell tissues resonant, accelerate blood circulation, eliminate impurities, resulting in both bio-thennal effect and physical effect. Thus, health will be improved.  

Similar in construction to Ceramic Flexible Mat Heaters with additional ceramic fibre insulation encased in stainless steel mesh and protected by a stainless steel backing plate.Particularly suitable for preheating pipework, vessels, and welded fabrications having either longitudinal or circumferential seams.   Robust and operate from a welding machine or Heat Treatment unit. Gives protection to the Ceramic Beads from weld splatter. Can be magnetically attached to work piece for fast application by use of two magnetic clamps.    

• operating temperature: 300°C
• range of capacities: 50,000 Kcals/hr to 15,00,000 Kcals/hr

Neotherm is an oilsolid fuel fired thermic fluid heater in vertical horizontal design having four heat transfer to ensure optimum efficiency. It ensures that maximum of its heating surface is exposed to radiant heat there by ensuring excellent thermal efficiency. Efficient combustion, forced circulation, liberal heat transfer areas & large furnace volume ensures over all efficiency of 88%± 1% on N.C.V.NEOTHERM is available in wide range of capacities from 50,000 Kcalshr to 15,00,000 Kcalshr at maximum operating temperature of 300°C.

we offer induction heating. induction heating is a method of providing fast, consistent heat for manufacturing applications which involve bonding or changing the properties of metals or other electrically-conductive materials. the process relies on induced electrical currents within the material to produce heat. although the basic principles of induction are well known, modern advances in solid state technology have made induction heating a remarkably simple, cost-effective heating method for applications which involve joining, treating, heating and materials testing.

• temperature: 0-2°C

Direct Contact Heater is an alternative heat exchanger to plate and tubular heaters. contact heaters. DCH will work with counter current heat exchange principle. DCH has high heat transfer co-efficient. In the DCH latent heat and part of sensible heat will be utilized for heating duty. DCH will work with an approach temperature of 0-2°C, whereas tubular heaters and plate heat exchangers will work with 5-7° C approach temperature. Counter current operation and high heat transfer co-efficient. Can be run with bled vapours and saving of exhaust steam. Effective utilization of the latent heat and part of the sensible heat. Suitable for heating with low pressure and temperature vapours. No condensate extraction system is required. Low head juice pumps and less power consumption.

• Finishing: Stainless Steel
• Available: 6kW and 8kW

The Steamy heater has a built-in steam generator which can be programmed to provide four different sauna climates - Soft Steam, Soft Bath, Soft Sauna and Normal Sauna - useful for those who prefer their sauna at lower temperatures. A dedicated controller has built-in protection to prevent steam temperature rising too high and will allow the sauna timber to dry after use. 6 - 8KW single or three phase connection. Supplied with remote control.

• Model: PH-CS300
• Volume: 300 Ltr
• Max load volume: 240 Ltr
• Heating power: 24 kW
• Temperature: 0-300℃ adjustable

Easy to install and operate. Uniform Heating. Large heating area. Short boiling time. Easy control of heating temperature. Mixing scrapers can touch the bowl thoroughly avoids burning. Stirring speed is adjustable. Corrosion & abrasion resistance. Longer service life.

we are offering Hot Runner Heaters & Thermocouple. Tubular Heaters are ideal for rough daily use, reliable and easy to maintain. Formed tubular heaters are available in round and square cross sections and various sizes and shapes as per manifold's design. These types of heaters are made of stainless steel or Nicolay with sheath diameter of 8 mm. The heating wire is helical wounded and made of high temperature resistant Ni-Cr alloy and the insulation consists of Magnesium Oxide (MgO). The connection ends are sealed with sealing components to protect the heater from moisture.

This Heavy Duty Robust Machne Is Specially Designed For Production Of Two Ply Corrugated (Roll) By Feeding Two Reels Of Craft Paper One As Media Paper And Other As Liner Paper Simultaneously. This Versatile Machine Has Two Sets Of Flute Rollers Which Can Be Alternatively Used. Changing Of Flute Rollers Is Hydraulically And Takes No Time. Flute Rollers Are Mounted On Spherical Bearings. The Machine Is Equipped With Hydraulic Power Pack Reel Stand Upto 1mtr Reel Diameter, Fingerless System Shall Optionaly Be Attached With The Machine.

Racold Solar water heating systems provide turnkey solutions for all types of hot water needs. These are available for applications like cleaningwashing in Bottling Plants, and various industries like Pharmaceuticals, Cosmetics, Dairy, Food Processing, Poultry, Textile etc.Feed water for boilers in various other Industrial applications.

• sizes namely: 35, 50 & 100 kgs/hr

Electrical hot water generator Neotech's Nanomatic' Steam Generators are offered in 3 sizes namely 35, 50 & 100 kgshr, These units are offered in compat design & are offered with imported World Class Monoblock Burners. These Boilers are extremely efficient & work in the vicinity of 90 % efficiency.