Industrial Humidifier Dealers in Mumbai

We are a well-known Exhaust Fan Manufacturer, Exporter and Supplier in the overseas market. The Exhaust Fan provided by us is made using advanced techniques and qualitative material ensuring reliable operations for a longer period of time. We offer Exhaust Fans at industry leading rates.

Centrifugal Blower We are instrumental in offering our clients with a precision engineered range of centrifugal blowers that is designed to for usage in cement, glass, power and pharmaceutical industries. Integrated with several components like fans, housing, rotor, drive and bearings, these high pressure blowers are suitable for combustion air, product cooling, pressure booster furnace blowers, foundry cupolas, glass cooling, drying ovens, smoke abstinent, liquid agitation and chip blowing.   The specifications of these blowers are given below: Available in various sizes 1/4 hp to 150 hp  Air handling capacities of 100 MCH to 150000 MCH  Systems resistance of 100mm to 2200mm WG static pressure These blowers are fitted with the following components: Centrifugal Fans Outlet Dampers Fabricated in a separate frame  Conveniently flanged for duct connection  The blades operate in parallel and rotate in bearings located out side of air stream Assures appropriate control of air volume (For extremely accurate volume control, paraflow or proportioning type damper should be used) Cleanout Door For easy access to the wheel and housing interior  For inspection or cleaning  Quick release door that conforms to the scroll curvature Securely held by refrigerator type latches Gasket for minimizing gas leakage Belt Guard Heavy gauge welded construction  Provides protection to personnel Coupling Guard Welded construction  Protects from possible injuries due to rotating coupling Heat Slinger Cast aluminum rotor  Used to create strong circulation of ambient air over the shaft and inboard bearing Shields bearings from hot gases, which may escape through the housing  Reduces heat conduction from shaft to bearings Gland Asbestos disc bolted to housing side Limiting gas leakage around shaft (Not gas-tight) Drain Connection Threaded pipe coupling welded to the lowest point on the scroll to allow condensate or other liquids to drain  Easily connected with standard pipes or traps Vibration Isolator Available in either steel spring type or rubber type to prevent vibrations transfer to adjoining area

• Power: Check Attached Brochure
• Brand Name: REXNORD
• Voltage: Check Attached Brochure
• Packaging Details: Export packing
• Blade Material: Plastic
• Supply Ability: 1000 Piece/Pieces per Day
• Port: JNPT
• Air Volume: Check Attached Brochure
• Model Number: REC 27255
• Electric Current Type: AC
• Mounting: Duct Fan

• Automatic Grade: Semi Automatic
• Air Circulation: 800 m3 /hr
• Power Consumption: 240 watts
• Dry Weight: 20 kg
• Humidity Maintain: 90%-95%
• Minimum Evaporator Capacity: 8 Ltr./hr.
• Coverage: 200 sqm

• Features and benefits: High humidification & cooling duties from a single unit, Very low energy consumption, Instant evaporation requiring very short section length, Advanced touch screen control panel, seven-stage control

the company is an eminent dehumidifier manufacturer, exporter, and supplier, based in india. The dehumidifier removes the water vapors from the air, which results in decreased humidity. The dehumidifier works very silently, owing to which it is highly demanded amidst the clients. Also, our dehumidifier has optimum performance and longer working life. applications food storage ammunition medicine manufacturing tool & production rooms

• Brand Name: Berjaya
• Capacity: 16 Trays of 24
• Body Material: SS
• Model: BJY-16F
• Dimension: 530 x 785 x 2050
• Frequency: 50hz

Details : No. Of Pan 16 nos Voltage / Phase (V/Ph)220 - 240 / 1 Input Power (W)2000 Machine Dimensions (mm) 530 x 785 x 2050 Packing Dimension (mm) 630 x 900 x 2190 Tray Size - 60 x 40cm Temperature with Steam Humidity Control Weight (Kg)68

Humidifier that we provide is a household appliance that increases humidity (moisture) in a single room or in the entire house. There are point-of-use Humidifiers which are commonly used to humidify a single room, and whole-house or furnace Humidifier which connect to the HVAC system to provide humidity to the entire house. Our designed Humidifier are very efficient and durable. Specialties High Durability Excellent performance Dimensionally design Available at competitive prices

• Usage/Application: For Humidity Controlling
• Usage/Application: Home, Hotel, Office
• Color: Grey
• Power: 6-9kw
• Warranty: 1year
• Driven Type: Electric

Quality management is an important of our organization and we ensure, our entire range is quality guaranteed and reliable. Deeply rooted in Mumbai (India), we are indulged in the process of providing products to any required destination with ease. The axial flow exhaust fans we provide are used for the heavy duty purposes.

• Material: HDPE, Nylon, Plastic, PVC
• Shape: Rectangular, Square
• Thickness: 0-5mm, 10-15mm, 15-20mm, 5-10mm
• Certification: CE Certified, ISI Certified, ISO 9001:2008
• Application: Home Dehumidifier
• Color: Blue, Green, Grey, White
• Pattern: Plain
• Feature: Crack Proof, Eco Friendly, Heat Resistant, High Strength, Superior Quality, Water Proof

• Type: Humidifiers
• Color: Multicolor
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1Kw
• Driven Type: Electric
• Warranty: 1yrs
• Color: Multicoloured

Features : LED lights, automatic power-off protection. A non-slip foot pad at the bottom to make the humidifier stand more stable. One-touch buttons, simple and quick. Easy to power and carry: USB powered Material: ABS plastic Light Weight, Easy to Carry. Add a drops of espial oils , it can bring you the aromatic scent , enhance your mood , relieve your stress. It also can be used as humidifier to add moisture to your air to eliminate dryness and help with your dry skin, chap lips and dry sinuses. Add a drops of esseial oils , it can bring you the aromatic scent , enhance your mood , relieve your stress. It also can be used as humidifier to add moisture to your air to eliminate dryness and help with your dry skin, chap lips and dry sinuses.

Air humidifier best quality

Alfa's heavy duty exhaust fans are designed and made with high quality material , which is useful at industrial , commercial and domestic sectors . Designed by our R&D team for the best output results from our product , whether its clock wise or anti-clock wise.

We are offering centrifugal fan. These fans use backward curved impellers made of steel or engineering plastics. The impellers are press fitted on the external rotor motor and dynamically balanced in two planes. Backward curved fans can be used with or without scroll housing, and find its application in sucking operations, and where static required at fan inlet is high.

NeoPAP® Bubble CPAP system generates natural pressure oscillations by creating bubbles in a water column.Combined with optimum humidification, NeoPAP® provides gentle yet effective respiratory support to spontaneously breathing patients.Available as a complete kit including : - NeoPAP® Bubble CPAP Generator - Safety Valve Kit - NeoVENT® heated wire Breathing Circuit, - Humidification Chamber - NeoPAP® Nasal CPAP Prongs. Cost effective, as kit can be used as both Bubble CPAP circuit as well as ventillator circuit.

• Model: HUMID-BM
• Power Supply: 220VAC+22V,50+1Hz
• Flow Setting Range: Low Flow Mode 2-25L/Min temp 34t, High Flow Mode - 10-80L/Min
• Temperature Control: 31oc,34oc,37oc
• Oxygen/% Measure: 21%-100%
• Fio2 Control: Manual titration control
• Alarm Parameters: Low oxygen concentration alarm, High oxygen concentration alarm, Ambient temp alarm
• Recommended Ambient Temp: 18oc-28oc
• Standards: IEC/EN 6060-1,IEC/EN 60601-1-2;1S08185
• Package: L330xW245xH315mm
• Application: Hospital

The Airovent T is a heat and moisture exchange device designed for use with spontaneously breathing patients with a tracheostomy tube.   Airovent T-hme which captures heat and moisture on expiration and returns to the patient in inspiration thus reduces loss of heat and moisture during respiration. Notes : Change the device every 24 hours or earlier as needed to prevent accumulation of secetions .Do not add moisture to the filter elements   Product Features:   Light weight design ensures maximum comfort and minimal protrusion. Minimises the drag on the Tracheostomy Tube. An efficient heat and moisture exchanger to warm and humidify inspired air reducing the risk of tube blockage from encrustations with minimal resistance to flow. Synthetic Hygroscopic media gives good humidification. Compatible with any other system Connector:15F fit to ET or TT Moisture return mg H20/Lat 500ml Vt:27.0mg H2O Resistance at 60L/min:102cm H2O Compressible volume :19m Weight :5 kg.

Crame Hot & Cold Utrasonic Humidifier with cordless Remote and feathre touch digital controls.Suitable for Residence,Offices and clinics.

• Usage/Application: Home, Hotel, Office, Restaurant
• Color: Black, Brown, Grey, Light White
• Voltage: 110V, 220V, 240 V
• Power: 1-3kw, 3-6kw, 6-9kw
• Warranty: 1year, 2years
• Certification: CE Certified, ISO 9001:2008
• Automatic Grade: Manual, Semi Automatic
• Driven Type: Electric

• Usage/Application: Home, Hotel, Office, Restaurant
• Color: Brown, Grey, Light White
• Voltage: 110V, 220V, 380V
• Power: 1-3kw, 3-6kw, 6-9kw
• Certification: CE Certified, ISO 9001:2008
• Automatic Grade: Manual, Semi Automatic
• Driven Type: Electric

• Weight: 2.61 kg
• Number of Blades: 4
• Country of Origin: Made in India
• Material: Metal
• Diameter: 39.5 x 39.5 x 21 Centimeters
• Type: Exhaust Fan
• Motor Speed: 2800 RPM
• Power Consumption: 70 W
• Blade Sweep Size: 22 mm

Dehumidifier with clothes drying function; quiet operation design; bud-like appearance; 6-layer guard shield Dehumidifier with clothes drying function Easy dehumidification with rapid drying 1)Compressor protection; 2)Anti-freezing protection; 3)Overload protection; 4)Overflow protection; 5)Hypoxia protection； 6)Overcurrent protection

• Voltage: 380 V
• Material: Stainless Steel
• No of blades: 4 blades
• Phase: Single Phase
• Frequency: 50 Hz

      Triplex high pressure heavy-duty crankshaft pump 3 ceramic plungers, brass head Bride with flexible coupling Working pressure: 70 bar Pressure regulating valve, built-in bypass with solenoid valve (BPS) Safety valve Glycerin filled pressure gauge Heavy duty ventilated motor 3-phase 4.0-5.5 HP 500-1450 RPM ON-OFF switch with thermal overload 3/4" M BSP inlet - 3/8" M BSP outlet Cyclic digital timer         Weatherproof s.steel skid cover on antivibration rubber feet Equipped with three-ph inverter with soft start only one variable pressurised pumping system can be used for multiple rooms with each room solenoid valve / humidistat arrangement for low initial investment & energy saving by VAR pump. Low noise Automatic variable flow rate- Can operate several nozzle lines Automatic switch-off if all line are closed Automatic switch-off if water supply is missing Automatic switch-off if no pressure (leakage) is detected Automatic switch-on if at least one line is opened Automatic switch-off if motor overheats Energy saving (absorbed power is proportional to water flow) Longer pump life (lower RPM) Automatic filling of pipelines (timer OFF until lines are refilled) Manufactured in compliance with CE regulations     EVOLUTION TIME ‘‘LSP’’ series for systems from 5 up to 30 fogging nozzles These series of professional high pressure pumps are the suitable solution with high quality and safety standard for all requirements to build professional misting systems with flow rates up to 2.5 l./min. with singlephase power supply.Our built-in digital cyclic timer (”Time” versions only) offers the full efficiency control of the fogging system by direct adjustment of the frequency of mist spray increasing the advantages on water and energy consumption with savings up to70%if compared to standard systems. LSP system with 700 RPMS motor allows very low noise AND longer pumplifetime.

Aerofoil design blades with low resistance and minimum air leak Extruded aluminium section blades and galvanised steel casing Linkage arrangement suitable for automatic Control Operation Easy fixing arrangement Wide range of sizes available

• Air Volume :: 110 m3/Hr
• Wattage :: 250 W
• Water tank capacity: : 2.5L

eatures: Remove up to 10L of moisture per day approx. Water full indicator Auto turn off once tank is full Air Volume : 110 m3/Hr Wattage : 250 W Built in carry handle Defrost Control Water tank capacity : 2.5L

We hold expertise in manufacturing and supplying of exhaust fans, that are available with us in excellent quality.

• Usage/Application: Hotel, Office, Restaurant
• Color: Multicolor
• Voltage: 220V
• Power: 1-3kw
• Warranty: 1year
• Brand Name: Vivo
• Certification: CE Certified
• Driven Type: Electric

• Usage/Application: For Humidity Controlling
• Usage/Application: Home, Hotel, Office, Restaurant
• Color: Black, Brown, Grey
• Warranty: 1year, 2years
• Features: Easy installation,Good Quality, Durable, Less maintenance,Abrasion resistant
• Material: Aluminium, Cast Iron,Steel,Mild Steel, FRP
• Driven Type: Electric

Specifications:• Control mode: Digital timer• Brand Name: Kawachi• Voltage (V): 220V• Power (W): 550w• Tank capacity: 1 liter,• Operation mode: Mechanical• Applicable object: household• Supports Anti Dry Burning: No• Classification: Steam Brush• Certification: CE• Model Number: k449Feature: Remove wrinkles, creases and odor from garmentsMultipurpose handheld steamer for removing wrinkles, creases & odor from garments.Tough enough for linens, safe enough for silk.Safe to use on different types of materials & fabrics.Lightweight, hand held steamer heats up in seconds for a quick & convenient use.No more burning or damaging fabrics with heavy, unwieldy irons.Compact & portable, great for travel.Package Contents::1 Main unit1 Straight nozzle1 Long Curved Nozzle1 Short Curved Nozzle1 Medicinal-box Nozzle1 Steam Iron Unit1 Beauty Cover1 Brush1 Circular Brush1 Cup