Industrial Mixer Dealers in Andheri East, Mumbai

STANDARD FEATURES • Available in working capacity of 5 liters - 10,000 liters • Available in all grades of stainless steel, carbon steel and special alloy steels. • Ribbon agitator for center discharge. • Designed for atmospheric operation. • Top cover with nozzles for material charging. • Centrally located Flush bottom discharge valve.• Jacket available for heating & cooling purpose. • Stuffing boxes with easily disassembled housings. PTFE gland packing provided.• Stainless steel surfaces are polished to desired standards. All exterior non-stainless surfaces are painted with enamel paint. • Squirrel Cage, Three Phase Induction Motors suitable for 415 Volts, 50 Hz.• Worm reduction gearbox, helical reduction gearbox.• Single Speed Drive. • Blender is mounted on supports providing adequate discharge clearance.

We have carved a niche in the market as the Manufacturer & Supplier of Titanium Agitator Tank based in Maharashtra, India. We make use of high-grade materials and the latest machinery for fabricating the Titanium Tank in compliance to set industrial standards. To ensure customer satisfaction, we pass the Titanium Tank through stringent quality checks before the final delivery. We are offering Titanium Agitator Tank at nominal rates.   For More Information Please Visit On : WWW.SAITITANIUM.IN

• Warranty: 1 Year
• Condition: Good
• Min. Order Quantity: As per client requirement
• Capacity Gross: 200 Lts.
• Speed of Mixer: 20 R.P.M. Approx.
• Electrical Service: 3 HP/1440 rpm/415V/3PH/ A.C. Supply.
• RDDC-9: 4000
• Working Capacity: 2.5 to 3 kgs.
• Dimensions: 17” x 8” x 12” inch.

Application Dry powder mixing for tablets and capsule formulations Dry granules sub lots mixing to increase the batch size at bulk lubrication stage of tablet granules. Salient Features The conical shape at both ends enable uniform mixing and easy discharge The cone is statically balanced to avoid any excessive load on the gear box and motor While the powder can be loaded into the cone through a wider opening, it can be discharged through a butterfly or slide valve Depending upon the product, paddle-type baffles can be provided on the shaft for better mixing inside the cone. The contact parts are made of either SS 304 or SS 316 Fame proof motor can be supplied as optional Capacity available 20lts.3000 Liters The working capacity can be exchanged to 80% of gross capacity by validated study depending on the product. 'Slant' designed (off centre Double Cone Blender is also available.)

• Brand Name: AST
• Electical Load: 440V, 3 Phase
• Flask Size: ( 110 x H 200)
• Max Volume Of Investment Mixing: 7 Kgs
• Flask capacity: 5 Flasks
• Design Type: Standard

Features: The Best quality of embedding in investment & flask. High quality of casting at lower cost of production. ST 5F mixture, stand-alone type design to fill 5 flasks under vacuum. (Dia. 110 x H 200) Simultaneously it laid out mix 7 Kg of embedding material in vaccum. Now it is possible to produce even a small number of casting in excellent quality with respect to the surface quality & the counter sharpness. All machine parts are made of special steel & Aluminium, therefore there will be little maintenance & reduced wear (affected by Gypsum & Water) On demand it possible to provide variable adjustment revolution speed with respect to the Corresponding embedding procedure.

• Type: Mixer Machine
• Condition: New

Mixrite Jet Mixers also known as Mixing Eductors comprises of two critical components namely the motive nozzle and the diffuser. In Jet Mixing , a fast moving stream of liquid [ motive liquid ] is injected into a slow moving or stationary liquid [ secondary liquid ]. In Jet Mixer , the velocity difference between the jet and the secondary liquid creates a mixing layer of jet boundary. This mixing layer grows in the direction of jet flow, entraining mixing the bulk liquid into the jet. Jet Mixers can be used as substitute for Agitators in practically all the cases where the liquids to be mixed can be pumped. Some typical applications of Jet Mixers are mixing blending, solid suspension, electro coating pretreatment tanks, lube oil blending, neutralization tanks, storage tanks for homogenization etc.

We manufacturer two different models of Brine Agitator. MONO BLOCK / COUPLED BRINE AGITATOR Made up of heavy duty M.S. Pipe in which a 1½” (38 mm.) shaft is fitted with gunmetal bush at both ends or taper rolling / ball bearing as required by the customer. These agitators are fitted with 14” Dia. C.I. Impeller/ Fan and the capacity of the agitator can be varied by changing the degree of Impeller/ Fan blades.   V BELT DRIVEN BRINE AGITATOR Made up of heavy duty M.S. Pipe in which a 2" (50 mm.) Shaft is fitted. The shafts has gunmetal bush at the fan end and taper roller bearing at the pulley end and are fitted with various sizes of C.I. fan / impeller. i.e. 8”, 12”, 16”, 18” & 20” according to capacity of the ice plant.   These agitators come in different models suitable for various depths of tank or as per customer requirement.  

The main drum of the Octagonal Blender is coupled to a suitable motor through an oil filled gear box mounted on a sturdy frame structure. The unit is provided with a butterfly valve at one side and is provided with removable baffles inside the drum. The other side is provided with amanhole for accessibility inside the chamber for cleaning. An electrical panel is provided for housing the motor on-off starter, timer, inching device etc. Granulation Line:- Octagonal Blender is coupled to a suitable motor through an oil filled gear box mounted on a sturdy frame structure. a butterfly valve at one side and is provided with removable baffles inside the drum. Salient Features: Due to its unique design lower power consumption at higher loads is possible. Large capacity models are possible due to its compact design. The inside of the blender is completely cleanable through the man hole provided at one side. Also the baffles are removable and can be easily removed for cleaning. Ease in loading through the loading container or through the over head silo or by vacuum transfer is possible. Due to its compact design, lesser floor space required compared t other blenders.

It is batch mixer having horizontal mixing system with horizontal, cylindrical drum and horizontally installed mixing main shaft which passes through both the end plates fitted with specially designed bearing housing and seals. Plough shear shovels are fitted on arm of the main shaft keeping minimum clearance between plough shaped element and shell wall. The mixer is provided with suitable valve depending upon the application and feed material. Flush bottom type gate valve or butterfly valve for discharge is provided at the bottom of the drum, which operates manually or by pneumatic system. Cleanup windows can be provided at the side of mixers with interlocking unit. In case the small quantities of liquids are to be added, spraying system with nozzle can be provided.

• Feature: Jacket is provided.Vessel provided with top/bottom entry stirrer for proper mixing.
• All contact parts: SS 316
• Non-contact parts: SS 304
• capacities: 10 to 5000 ltrs
• used: mixing of ointments, lotions, paste and syrup

Inner part of the vessel is made from SS 304 and outer part is made from graded mild steel. It is equipped with temperature sensor and provided with water circulation system for cooling. The container is designed specially to remove moisture by means of generating sufficient heat due to friction. Thus resulting into free flowing dry mixing.

  SS316L for all contact parts GMP standard fullvolume650L work capacity 520L Totally three pots including one emulsifying pot with water phase pot and oil phase pot Top Homogenizer speed, 0-2800rpm,VFD control count agitator speed 0-45rpm, VFD control Auto control of mixing time, speed, and temperature Hydraulic control of lifting Cover lifting design Electric heating and water cooling Bottom discharge Button control

SALIENT FEATURES * The conical shape at both ends enables uniform mixing in short period and easy discharge. * All contact parts are made out of stainless 304316MS quality material, as required by customer. * Maximum care has been taken to ensure safe operation of the unit. * Safety gaurds will be provided with interlocking system.

• CAPACITY: 10 Kgs. to 3000 Kgs.

blending and mixing of Dry Powders Granules and Crystals like Colors, Pigments, Minerals, Dyes, Flour, Grain, Ceramics, Detergents and other food, Pharmaceuticals & Chemicals powders.The conical shape at discharge for easy discharge and no retention.Safety guards with interlocking system.All moving parts covered with S. S. 304 cover.

• Weight: 68 kg
• Container Size Capacity: 20 liter (5 gallon)

The Turnabout automatic ink mixer employs a blade that imparts a lifting and rolling action to screen printing inks. That, coupled with Turnabout’s rotating action, ensures evenly blended inks, even reaching ink that typically settles on the sides and bottoms of containers. The container clamping system is self-centering and adjusts to accommodate a wide range of container sizes. Reaches screen printing ink that typically settles on the sides and bottoms of containers Adjustable clamping system accommodates a wide range of container sizes Available in standard (DC) and heavy-duty (HD) models

We are offering high speed stirrer.we have available with us high speed stirrer that is used in various industrial applications for stirring purposes. The high speed stirrer is precisely manufactured with the use of high grade stainless steel as well as mild steel. Also, we are one of the renowned manufactures of high speed stirrer in the country.

• Power: 3KW
• Model No:: LRB-1
• Capacity:: 100 L
• Mixing Volume:: 60L-60L
• Speed:: 76RPM

• Power Required: NA
• Air Required: 10 - 15 CFM @ 3 - 4 Kg Bar
• Man Power Required: NA
• Contact Parts MOC: SS 304/SS 304 L
• Shell Thickness (mm): 1.8
• Dish Thickness (mm): 2

We are offering mobile air operated perfume mixing vessel , machine application : 1) perfume mixing 2) low viscous liquid mixing 3) non foaming liquid mixing 4) liquid mixing 5) oil mixing machine operationdescription transfer liquid in the vessel required for mixing using the swastik's perfume transfer system. After all liquid is in the vessel give air supply to the vessel via prefitted frl. Switch on the air supply. The air operated agitator will start agitating the liquid in the vessel. Regulate the air pressure as required to change the speed of the agitator. After agitation is complete switch off the air supply. Transfer the liquid into the swastik's storage vessel for maturation or filling process. The vessel can be cleaned using swastik’s mobile cip system or manually. machine features : 1) large man hole for easy access 2) belly handle for easy maneuvering 3) lockable pu wheels 4) outlet valve provided 5) pre-fitted frl 6) variable speed 7) extra coupling for cip spray nozzle integration.

Type : Propeller with S.S.Stand M.O.: S.S.304 or S.S.316 Motor H.P.: ½ to 20 H.P depending on the type of product and vessel capacity. Hollow Shaft stirrers also available. Homagenisers ( High Speed Emulsifier. ) For Homogenising Suspension, Liquids, Fruit Juice. Rotomix assembly specifically designed. M.O. S.S. 304 Mounted on M.S. Stand ( S.S. Cladding optional ) with height adjusting arrangement. Motor : 1 H.P to 20 H.P depending on the capacity vessel.  

The offered Industrial Mixers is manufactured using optimum quality components and cutting edge technology. In order to maintain the quality, our quality experts test this Industrial Mixers on different parameters. Owing to their easy to operate feature and low maintenance requirements, these Mixers are highly demanded. This Mixers is inspected on diverse parameters of quality in order to assure its flawlessness.

Electrical Mixing and evacuating instrument for the processing of plasters and investing compounds. Exact mounting of the mixing time vacuum pump removes entrapped gas or air during the mixing process. Technical Data : Rated voltage : 220/240 V.A.C. Rated Freqency : 50/60 HZ. Power Consumption : 200/250 Watts Weight Basic Insrtu.: Appro 18Kg.

• Country of Origin: Made in India
• Voltage: 220 - 440 V
• Brand: Bainite

The unit is specially made for dry mixing, blending etc. The mixer is supplied complete with 1No. Stainless Steel 316 drum having an airtight lid, with quick closing and opening clamps. The capacity of the drum is 200 liters, and it can mix 50 to 80 kgs. of material.

For intensive mixing kneading homogenizing pasty viscous and thick plastic &  rubber compounds etc.  Excellent for  Chemicals, Rubbers, Plastics, Adhesives,  Textile Dyes, Pastes, Pharmaceuticals etc.

• Condition: New
• Lead Time: As per the order
• Port: Nhava Sheva Mumbai
• Place of Origin: Maharashtra, India
• Packaging Details: Export Quality Packaging

The most delicate operation in the various stages of melting lost wax consists of the preparation of the cylinders of refractory plaster. The machine performs the mixing operations of the gypsum and filling of the vacuum cylinder in a very short time. This allows, during the compaction of the gypsum, to obtain a non-wrinkled surface, reducing the time for pre-finishing and especially the loss of metal. FEATURES: • Motor of the two-speed mixer, for mixing and rinsing; transmission belt and toothed pulleys. • Bell in stainless steel, with transparent floor in Plexiglas. • The machine and 'built in such a way as to allow the use of different heights bells. • electromagnetic vibrator with potentiometer for varying the intensity of the vibrations