Industrial Mixer Dealers in Dindoshi, Mumbai

• Capacity: 5-5000 Ltr
• Brand Name: Srinidhi
• Design Type: Customized
• Particulars: Cosmetic Mixing Vessel
• Vessel: Horiz. 2U trough Stationery
• Vessel Support: Saddles
• Charging: On top central/ side
• Discharge: on bottom central/ side
• Rotary Part for mixing: 2 Nos Central Horizontal Z type
• Drive & Position: Motor coupled to worm/heli-worm reduction, then spur gear set
• RPM of rotors: 20/30
• Drive discharge: optional
• Suitable for mixing: Soap noodles, Highly viscous materials
• Liquid spraying: Possible by providing a spray bar inserted through side
• Homogenizer: Not needed
• Chopper/ Lump breaker: Not needed
• Jacketing: possible
• Vacuum: Not needed
• Sealing: St.box
• Air filter: Not needed
• Manhole: On top cover or body
• Mixing time: 25-30 minutes
• Drying time For 20% Vapour content: Not used for drying , but for heating/cooling
• Baffling: Not needed
• Mixing method: Conveying through Z flights horizontally
• Precision of Mixing: Two dimensional, reasonable
• Suitable for product: Highly viscous input
• HP rating: 60-65 % efficiency
• Space Occupancy: Occupies a lot of horizontal space
• Safety Factor: Rotor is totally enclosed, no lifting of drive, hence safe.

We are well known for manufacturing and supplying of wide variety of Plough Shear Mixer.

• Capacity: Production From 50 L To 25000 L
• Screw Speed: 60 RPM
• Brand Name: Shiv Shakti
• Working Volume: 35-17500 L
• Screw Motor: 1-50 HP
• Swing Arm: 1.5-6 HP
• Diameter: 500-3880 mm
• Height: 700-5275 mm

We are the leading supplier of this products.

• Capacity: 40-600 Kg/batch
• Material: SS
• Weight: 200-300 Kg

• Model Name/Number: ELITE - 25
• Capacity: 25 - 200 KGS
• Brand Name: ELITE
• Usage/Application: Mixing
• Material: SS
• Shape: CONE
• Design Type: Standard

• Driven Type: Electric
• Condition: New
• Automatic Grade: Automatic
• Application: Food Industry
• User: For Mixing Atta
• Brand Name: Pack Point
• Body Material: Stainless Steel

We are an old prominent company that has a wealthy knowledge in fulfilling the additive mixing needs of various consumers. We provide Twin Shaft Mixers in India to our consumers with a wide range of excellent quality Twin Shaft Mixers manufacturers in India that is specifically designed to disperse medium to high tackiness materials. We are a economical business that provides superior quality Twin Shaft Mixers manufacturers in India to consumers at reasonable rates and promise to meet urgent demands. Twin Shaft Mixers Manufacturers in India proposal among the most advanced mingling resolution, competent of managing from high zero slump material. The Twin Shaft Mixers manufacturers in India mixing containing two straight shafts with armaments and paddles disturbing counter current; Counter rotating mixing arms and paddle create a twirl shaped perpendicular and parallel mix direction, which ensure proper three dimensional mixing.

• Advantages: Low energy consumption,Custom design.

STATIC MIXER eliminate costly downtime and enhance product and process control. SCIPL static mixers have no moving parts to cause maintenance problems, and they deliver exceptionally long, worry-free life.After careful study & consideration of various process parameters such as Viscosity, Density, Flow rate, Pressure Drop & desired CoV –Coefficient of variation (a measure for degree of mixing), Reynold’s number, flow type- Laminar or turbulent; we at Shalin Composites design & fabricate static mixers for various applications. Our vast experience & expertise in field of composites enable us to offer static mixers in various material of construction viz: PP, PVC, FRP, PVDF, PTFE, SS, and MSRL to suit highly corrosive conditions.

• Material: SS
• Automation Grade: Automatic
• Capacity: 1000 to 5000 BPH
• Brand Name: V.J. Water
• Voltage: 110-480 V
• Frequency: 50-60 Hz

• Type: Mixing Tanks
• Color: Black
• Feature: Anti Corrosive, Durable, Eco-Friendly, High Quality, Shiny Look
• Warranty: 1year
• Feature: Reliable performance
• Application: Industrial
• Material: PP , Stainless steel

We are counted among well-reckoned Manufacturers, Exporters and Suppliers of Polypropylene Tank Mixing Eductors. We specialize in offering customized Polypropylene Tank Mixing Eductors as per drawings and specifications provided to us. We offer Polypropylene Tank Mixing Eductors in bulk and retail amount. We offer our Polypropylene Tank Mixing Eductors at competitive prices.   Specification : Material - Polypropylene. Inlet Conn. (in.) - 1/4, 3/8, ½, ¾, 1 and 1-1/2 BSPT (M) Effective Flow Field - 3’ to 46’ of flow per second (.91 to 14 m of flow per second) Dimensions - 3” to 10” length (81 to 250mm); 1-1/4” to 3-3/4” (33 to 95 mm) outside diameter.

• Application: For Mixing Color
• Weight: 100-200kg
• Voltage: 110V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

We are a leading manufacturer and trader of this conical rapid mixer. We manufacture these products using quality raw materials, giving it a very strong and durable built. These product are basically used for mixing two or more powders which are resistant to mixing, e.g. Powders for printing cartridges.

• Capacity: 40-600 Kg/batch
• Material: SS
• Weight: 200-300 Kg
• Design Type: Customized

Our company has garnered reputation as the Manufacturer, Supplier and Exporter of Industrial Stirrers from Mumbai, Maharashtra. The Stirrers offered by us can be used for various functions like boiling, monitoring of various processes, controlling reactions etc. Our buyers can avail an assortment of Industrial Stirrers at highly affordable rates. 

Ribbon Blender :- Ribbon a blender comprises of a ‘u’ shaped horizontal trough and a specially designed double helical ribbon rotating within. Each set having one inner and one outer ribbon. Both the sets are accurately positioned and oppositely pitched on the agitator shaft to prevent localized accumulation and effect good mixing of the products. In the ribbon blender powder is mixed horizontally as well as vertically. Ribbon blenders are suitable for free too cohesive type of powder and can handle varying densities. These ribbon blenders are used for mixing dry granules & powders homogeneously.

Jet Mixing can also be used judiciously for Inline Mixing. There are some situations where Inline Jet Mixer could be preferred over Static Mixers. If one of the Liquid has sufficiently high pressure and if there is not enough space for a Mixer a Standard Jet Mixing arrangement could be used as shown above. Here the ratio of Flow Rates of the Mixing Liquids plays an important role. When the Mixing Liquids viscosities have a large difference that is their ratios are either very high or very low a preferred arrangement is as shown as given below A situation where the density difference in two liquids is high and one invariably settles in at the bottom of a horizontally laid pipe, an arrangement shown below is useful. A typical example of this is Crude Oil flow from an Oil Well to the Tank Farm Mamko have sufficient knowledge of Jet Mixing to enable them to design Inline Jet Mixers as per the process requirement.    

Slurry mixer, Power-Sprays’ GRCGFRC mixers are designed to produce high quality mixes in the minimum time. Power-Sprays offers fixed speed “High Shear” slurry mixers for preparing low water content slurries for Traditional Sprayed GRCGFRC and variable speed “Combination” mixers for the production of both Traditional Spray and Premix GRCGFRC, including Spray Premix GRCGFRC. Formats range from 125 kg maximum capacity manually loaded machines through to 300 kg capacity fully automated bulk fed batching systems. A comprehensive range of accessories is also available which can provide semi or fully automated control of the addition of chemical admixtures, Acrylic Polymers and the Alkali Resistant glass fibres.

We have already designed and manufactured plough shear mixer as mixer cum granulator cum dryer. We have also manufactured Plough Shear Reactor under pressure and also manufactured as Mixer cum vacuum dryer. We have made different sizes of Plough Shear Mixer ranging from minimum 20, 60, 150, 400, 600, 800, 1000, 1200, 1650, 3000, 4200, 5000 and 6000 liters. We have capacity to manufactured up to 15000 liter. We have also made continuous Plough Shear Mixer for continuous mixing of powders or powder to liquids. We have exported and installed Plough Shear Mixer in Germany and set the reverse stand.

• Type: Automatic
• Certification: CE Certified
• Application: Industrial Use
• Voltage: 220V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1 Year
• After-Sales Service Provided: Spare Parts

We are the main supplier of this product.

Saves Power. Saves Energy. Saves Pigments. Provided with auto stop. Easy to operate. Stainless steel mixing drum. Efficient colour mixing.

• Capacity: 20,000 liters

Basically a magnetic mixer is like a conventional mechanical mixer — it has a motor, a driveshaft, and mixing blades that mix stuff in a tank. Technically the term used for the mixing blade assembly in mixers is “impeller.” A propeller on a boat or an airplane is also a type of impeller. Impellers are designed to move liquids or gasses by rotating. What makes a magnetic mixer different from a conventional mixer is that the motor uses magnets to move the impeller. This works by attaching one set of magnets to the motor driveshaft and another set of magnets to the impeller.The advantage of magnetic stirrers is the suppression of sealing technology. The rotation of mixing elements is enabled by a magnetic field creating a touch-less torque transmission.

Available in Standard & GMP Model with contact parts in SS 304 SS 316. Made from 14G ss sheet having quickly opening lid and mirror finish, running on heavy duty ball bearing driven by oil filled worm gear - box and powered by suitable electric motor complete with starter and safety guard locks. Easy and dustless operation

• Brand Name: Dynamic Enterprises
• Design Type: Customized
• Model: PM100
• Capacity: 25 upto 2000 Ton

• Automatic Grade: Automatic
• Capacity: 10 - 50 L
• Finishing: Polished
• Motor Power(Kilowatt): 2.5 - 5.5
• Rotation speed (RPM): 1200 r/minute
• Voltage(Volt): 220 - 440 V
• Body Material: Stainless Steel

• Brand Name: Sanipure Water Systems
• Storage Capacity: 500-1000 L, 250-500 L, 1000-5000 L
• Category: Tanks
• Product name: Stainless Steel Hot Water Tanks
• Material type: Stainless steel SS 304 - SS316L
• Min order Qty: 1pc
• Features: Aesthetic look  Corrosion-free Precision made Smooth surface finishing Highly durable Easily washable Cost-effective

• capacity: 60 litre

The 60 litre capacity of the High Shear mixer can easily accommodate 125kgs of spray grade GRC GFRC slurry. Single speed (5.5 KW) drive Platform-mounted version also available Supplied with additional blade and hub.

The High Speed Stirrer Emulsifier has been design to mix, emulsify, homogenize, disperse, as well as for particle size reduction in liquid - liquid and liquid solid solutions.

We offer Variable Speed Dispeser from 100 to 2000 Ltrs per batch with variable speed / hydraulic lifting & lowering arrangement in Flame proof or TEFC drive. Quantity : 1 Set Payment Terms : L/C (Letter of Credit),T/T (Bank Transfer) Port Of Dispatch : Mumbai Production Capacity : 50 Delivery Time : 8 weeks Packaging Details : Wooden case

we are offering ribbon blender. avail the most durable range of ribbon blender, offered by us. this ribbon blender is manufactured by skilled professionals, using high quality component that complies with international quality standards. our ribbon blender is very much appreciated for its high durability, resistance to corrosion, fine finishing, regulated discharge, leak proof design and high performance. we are also offering customized range of ribbon blenders to the clients. working of the mass mixer mixing mechanism : ribbon arms welded to the main shaft and ribbon blades of dual pitch interrupted type ptfe gland mechanism provided a shaft ends prevents ingress of external powder into the trough and prevents leakagecharging : from the top charging can be done through a hinge able lid (1/3rd hinged and 2/3 rd fixed hopper or nozzle can be provided for additional spraying of additives.discharge : by bottom discharge slide, iris or butterfly valve of suitable diameter, for regulated discharge construction of mass mixer shell : consisting of 'u' shaped trough of suitable dimensions with side plates . shell of ss304 contact parts and side plate duly m.s stiffened from outside and from inside with s. s.drive : consisting of suitable h.p. tefc 3 phase ac 415 v 50 cycles motor coupled to suitable worm gear, with driving shafts mounted on suitable plumber blockmounting : mounted on suitable isme section stand with protective covers for belts and couplingsmoc : all contact parts in ss 304 constructions complete unit with s.s cover and all surfaces polished to smooth finish ms parts duly painted to smooth finish available in unit with flp motors and flp push button station but with non flp panel to be mounted outside flp areaunit in ss 316 contact partsunit in gmp model with non contact parts in ss 304 or cladded covered with ss 304 as far as possible