Industrial Mixer Dealers in Vile Parle West, Mumbai

We manufacturer two different models of Brine Agitator. MONO BLOCK / COUPLED BRINE AGITATOR Made up of heavy duty M.S. Pipe in which a 1½” (38 mm.) shaft is fitted with gunmetal bush at both ends or taper rolling / ball bearing as required by the customer. These agitators are fitted with 14” Dia. C.I. Impeller/ Fan and the capacity of the agitator can be varied by changing the degree of Impeller/ Fan blades.   V BELT DRIVEN BRINE AGITATOR Made up of heavy duty M.S. Pipe in which a 2" (50 mm.) Shaft is fitted. The shafts has gunmetal bush at the fan end and taper roller bearing at the pulley end and are fitted with various sizes of C.I. fan / impeller. i.e. 8”, 12”, 16”, 18” & 20” according to capacity of the ice plant.   These agitators come in different models suitable for various depths of tank or as per customer requirement.  

  General Specification: Shell : Consisting of ‘U’ trough of suitable dimensions. Construction of  S.S and side plates duly M.S stiffened from outside and from inside with S.S. Mixing Mechanism : Paddle type blades welded to the main shaft provide for efficient mixing of thick heavy material. PTFE gland mechanism provided at shaft ends prevents ingress of external powder into the trough and prevents leakage. Charging : From the top charging can be done through hingeable lid, Hopper or Nozzle can be provided for additional spraying of additives. Discharge : By bottom discharge slide Iris or Butterfly valve of suitable diameter, for regulated discharge. Drive : Consisting of suitable HP TEFC 3 phase ac 415v / 50 cycles motor  coupled to suitable worm gear, with driving shafts mounted on suitable plummer block. Mounting : Mounted on suitable ISMC Section Stand, with protective covers for belts and couplings. MOC : All contact parts in S.S construction. Complete unit with S.S. cover and all surfaces polished to mirror dull finish. MS parts dull painted to smooth finish.   Options Available :  The control panel is mounted on platform and is provided.                                                                                                          1.                                      

0° stopping for easy docking and undocking of the bin Safety guard around the blender bin Proximity Sensor is provided for safe operation Flexibility of accepting variable bin sizes in single drive unit cGMP Construction S.S. 316 Butterfly valve at the bottom suitable for discharge. Vent nozzle on top Most effective for low volume active ingredient blending with as low as 1 to 1.5%

• Type: Mixer Machine
• Condition: New

We are one of the leading static inline mixer manufacturers, exporters, and suppliers in india. The static inline mixer, offered by us, has no moving parts and it utilizes the energy of the continuous flowing fluids itself. Our static inline mixer efficiently mixes solids, liquids, and gases in any combination. used for blendingdispersionheat exchangeemulsificationph controlflash mixingmass transferslurry suspensiongas-liquid contacting features of static inline mixer simple & compacthigh energy efficiencylow capital & operating costis used for continuous processhigh degree of operational safetyhave no moving parts and hence maintenance freehigh degree of mixing per unit of expended energysize can be selected to suit existing pipeline size available in all sizesdifferent end connections:flangedscrewedidf headsvarious materials:316 ss304 sscarbon steeltitaniummonelhastealloypolypropylenepolytetrafluroethylene [teflon]polyvinyl chloridefiberglass reinforced polyesterpp/frphigh density polyethylene

Inline Mixer manufactured by Rufouz Hitek Engineers serve in all major industries related to the engineering fields. They are extensively used to smooth the progress of heat as well as mass transfer. The technique of gashing and reunification helps this device to becoming a great mixing equipment. They are able to ensure complete interruption free process. In such mixer fluids flow rapidly either from clockwise or anticlockwise direction to give consistency in product quality.

We have carved a niche in the market as the Manufacturer & Supplier of Titanium Agitator Tank based in Maharashtra, India. We make use of high-grade materials and the latest machinery for fabricating the Titanium Tank in compliance to set industrial standards. To ensure customer satisfaction, we pass the Titanium Tank through stringent quality checks before the final delivery. We are offering Titanium Agitator Tank at nominal rates.   For More Information Please Visit On : WWW.SAITITANIUM.IN

• Brand Name: AST
• Electical Load: 440V, 3 Phase
• Flask Size: ( 110 x H 200)
• Max Volume Of Investment Mixing: 7 Kgs
• Flask capacity: 5 Flasks
• Design Type: Standard

Features: The Best quality of embedding in investment & flask. High quality of casting at lower cost of production. ST 5F mixture, stand-alone type design to fill 5 flasks under vacuum. (Dia. 110 x H 200) Simultaneously it laid out mix 7 Kg of embedding material in vaccum. Now it is possible to produce even a small number of casting in excellent quality with respect to the surface quality & the counter sharpness. All machine parts are made of special steel & Aluminium, therefore there will be little maintenance & reduced wear (affected by Gypsum & Water) On demand it possible to provide variable adjustment revolution speed with respect to the Corresponding embedding procedure.

Inline Mixer manufactured by Rufouz Hitek Engineers serve in all major industries related to the engineering fields. They are extensively used to smooth the progress of heat as well as mass transfer. The technique of gashing and reunification helps this device to becoming a great mixing equipment. They are able to ensure complete interruption free process. In such mixer fluids flow rapidly either from clockwise or anticlockwise direction to give consistency in product quality. All the internal parts are well attached so that internal pressure remains constant. We made such types of internal parts that aids in ideal mixing and increase the quality of the product by adding realistic results. According to the different needs of various clients, they come in a wide range, so try to choose that design which suits best to you. Inline mixers are applied in various applications to get the desired output. They are highly preferred for facilitating the process of reaction engineering, heat transfer and mass transfer. We offer the variety of ranges to meet different purposes with their own unique flow patterns. Along with this Rufouz Hitek Engineers Pvt. Ltd. also offer Static Inline Mixer designs to our clients. Degree of mixing required, ability to be cleaned, appropriateness of scale-up, pressure fall, shear rate, residence time allotment, heat transmission and hold-up volume are some essential factors that actually decided the efficiency of the inline mixers.

• Condition: Good
• Capacity Gross: 200 Lts.
• Speed of Mixer: 20 R.P.M. Approx.
• Electrical Service: 3 HP/1440 rpm/415V/3PH/ A.C. Supply.
• RDDC-9: 4000

• Brand Name: MARKSZ
• Application: PLASTIC MIXING
• Condition: NEW
• Production Capacity: 250 KGS PER HOUR
• Warranty: 1
• After-Sales Service Provided: YES
• Model Number: M50HP
• Place of Origin: INDIA

We are offering plastic high speed mixer advantages over normal ms mixer this series can release water molecules with heat friction through high speed rotating with double functions in effective drying and even mixing. It is particularly suitable for complete drying and powder mixing. Easy discharge of materials. The bottom of barrel body applies taper design without dead corner profile. Motors has higher utilization rate, and the barrel can be cleaned easily. Longer life of housing due to coling attachment for bearings stainless steel tank fast heating due to conical shape at bottom. Production capacity available as per requirement

We are offering stirrer for mixing liquid, powder etc. availabe in 2 type 1. Single jacket 2. Double jacket 1. Single jacket - available in 2 hp, 3 hp and 5 hp. capacity - 250 ltr, 300 ltr, 400ltr, 2. Double jacket with gear box - 10 hp, 15 hp & 25 hp.

• Features: All CGMP models.High In performance.Effective Blending.WIP inbuilt for cleaning.Spray nozzles for liquid introduction.Dimpled or baffled jackets for heating or cooling.
• Applications: Food Industry.Pharma Industry .Construction Industry. Chemical Industry. Cosmetic Industry.

• Shape: Round
• Application: Industrial
• Weight: 100-1000kg
• Feature: Excellent Agitation, Low Power Requirements
• Finishing: Polished
• Warranty: 1 Year

Available in various working capacities from 10 Ltrs to 30,000 Ltrs. Can be used for mixing various proportion of solid- liquid, Liquid – Liquid having different densities, viscosities and specific gravities. Agitator can be designed to suit different type of materials  & process requirements also can be provided with required speeds. Limpet / Jacket can be in built for heating/ cooling purpose ( to with – stand necessary pressure) All other accessories like nozzles, valves, sight glass, Light glass, temperature and pressure sensors can be incorporated as per the design, vessel/ jackets limpet can be offered in stain steel, mild steel or any other material as per the requirement.Used In :- Pharmaceutical, Chemical, Pesticides, Fertilizers, Food, Pigments, Dyestuff, Petroleum Industries.Available various pattern stirrer – Turbine, Pitched Turbine, Anchor Type, mug type, plouder, propeller, Disc turbine etc.Capacities  - 10 Ltrs.  to 30,000 Ltrs.M.O – M.S, S.S.304, S.S.316, 316L , Hastalloy, Titanium

• Material: 304 Stainless Steel
• Model: IPM-600
• Volume: 600 L
• Motor: 1.5 KW
• Rotate speed: 0-6 RPM
• Weight (kg): 450

  Clockwise rotate for mix the material, and anti clockwise rotate for load out material. Special Nozzle will provide with machine for spray fructose inside mixer. Special design as per the above photo.

• Country of Origin: Made in India
• Voltage: 220 - 440 V
• Brand: Bainite

Industrial drum mixers are ones where the drum is rotating and the blades are stationary. Its design of the blades is given such that the powders are mixed homogeneously. Capacity : 25 kg to 500 Kgs batch

• Brand Name: Blastline
• Capacity: 20 -40 Ltr
• Color: Grey
• Material: Stainless Steel/MS
• Surface: Galvanized
• Power: Pneumatic
• Application: Paint/ epoxy mixing
• Orientation: Hand Held

Sulzer (ABS) XRW mixers have an integral motor and are suitable for agitating, blending, mixing, dissolving and suspension of solids in municipal treatment plants, industry and agriculture. ABS offers highly efficient multipole and gear driven mixers with either standard or explosion proof motor enclosures.

We are engaged in offering of optimum quality of Industrial Agitators. These Industrial Agitators are developed by using advance technology & finest quality of material in accordance with industry standards. These ranges of products are tested on different quality standards and are used for many purposes. Price depends on the size and dimension and also varies as per the customers requirement. Our offered range is strictly checked under the guidance of quality checkers.

The unit is specially made for dry mixing, blending etc. The mixer is supplied complete with 1No. Stainless Steel 316 drum having an airtight lid, with quick closing and opening clamps. The capacity of the drum is 200 liters, and it can mix 50 to 80 kgs. of material.

• Application: To mix high viscous paste & Ointment.
• Capacity: 100 to 3000 Kg.
• TECHNICAL SPECIFICATION: Contra rotating type agitator with separate drive and Teflon scrapper.
• OPERATION: Contra rotating agitator for uniform mixing and minimize timing for batch preparation.
• FEATURES: Vessel design vacuum type for powder charging and remove ariation from product.
• ADVANTAGES: To mix powder and Liquid in minimise the timing.

For intensive mixing kneading homogenizing pasty viscous and thick plastic &  rubber compounds etc.  Excellent for  Chemicals, Rubbers, Plastics, Adhesives,  Textile Dyes, Pastes, Pharmaceuticals etc.

• Production Capacity: 10 Kgs. to 3000 Kgs.

blending and mixing of Dry Powders Granules and Crystals like Colors, Pigments, Minerals, Dyes, Flour, Grain, Ceramics, Detergents and other food, Pharmaceuticals & Chemicals powders.The conical shape at discharge for easy discharge and no retention.Safety guards with interlocking system.All moving parts covered with S. S. 304 cover.

• Power Required: NA
• Air Required: 10 - 15 CFM @ 3 - 4 Kg Bar
• Man Power Required: NA
• Contact Parts MOC: SS 304/SS 304 L
• Shell Thickness (mm): 1.8
• Dish Thickness (mm): 2

We are offering mobile air operated perfume mixing vessel , machine application : 1) perfume mixing 2) low viscous liquid mixing 3) non foaming liquid mixing 4) liquid mixing 5) oil mixing machine operationdescription transfer liquid in the vessel required for mixing using the swastik's perfume transfer system. After all liquid is in the vessel give air supply to the vessel via prefitted frl. Switch on the air supply. The air operated agitator will start agitating the liquid in the vessel. Regulate the air pressure as required to change the speed of the agitator. After agitation is complete switch off the air supply. Transfer the liquid into the swastik's storage vessel for maturation or filling process. The vessel can be cleaned using swastik’s mobile cip system or manually. machine features : 1) large man hole for easy access 2) belly handle for easy maneuvering 3) lockable pu wheels 4) outlet valve provided 5) pre-fitted frl 6) variable speed 7) extra coupling for cip spray nozzle integration.

• Condition: New
• Lead Time: As per the order
• Port: Nhava Sheva Mumbai
• Place of Origin: Maharashtra, India
• Packaging Details: Export Quality Packaging

• Power: 3KW
• Model No:: LRB-1
• Capacity:: 100 L
• Mixing Volume:: 60L-60L
• Speed:: 76RPM