Industrial Plastic Pipes Dealers in Andheri East, Mumbai

• Brand Name: FIBROTECHNIKS
• Surface Treatment:: FABRICATED
• Application:: These pipes are used for raw water, effluent, chemicals,gases etc.
• Technique:: HAND LAY UP
• Dimensions:: 25 mm DIA UPTO 5000 mm DIA
• Length:: 3 Mtrs or 6 Mtrs

We offer wide range of grp pipe in different application that are fabricated using suitable polyester or vinyl ester thermoset grp pipe are used for wide variety of corrosive chemicals and gases due to its resistance to chemical media. advantages of using grp pipe :- light weight lower cost of supports easy for installation / handling saves cost and time of installation corrosion resistance these pipes are manufactured in various sizes, pressures, thickness depending upon its applications. suitable industries : - power plant / fertilizers / petroleum/chemicals - paints/ pickling plants/textile

" tufhose" we are manufacturer and exporters of all kinds of pvc braided hoses , garden hoses, suction hoses, duct hoses, spring wire hoses / thunder hoses etc.   pvc garden hose pipe is mainly used for gardening, construction and also used in home..

Oil casing pipe in accordance with the SYT6194-96 standard, it is available as short thread type and long thread type supplied with their couplings.

• Condition: New

• Brand Name: Mehar
• Material: HDPE DWC
• Color: Orange
• Application: Underground Cables
• Length: 6 Mtrs
• Type: Pipes
• Double Walled & Single Walled Corrugated: Black-Yellow , Orange
• 40 mm to 315 mm: -

We are offering hdpe dwc swc pipes. Corrugated ducting for under-ground cable protection management and sewer drainage known as double wall corrugated (dwc) hdpe corrugated pipes, post-tensioning of structures known as single wall corrugated (swc) pipes, microducts & polymide flexible conduits for electrical applications. These pipes are manufactured on imported production lines and according to various national and international standards. We are associated with prestigious clients like indian railways airport authorities pwds municipal corp. bsnl & other telecom companies for a long time. sizes produced: 40mm od to 315mm od

PLASTIC TUBINGS & FILMS Our product range includes a wide range of Plastic Tubing and Films such as Shrink Film Roll and Wide Width Film.

As Suction & Transport Hose Suitable For Below Substance: Waste WaterGaseous & Liquid MediasAbrasive Solids Such As Dusts, Powders, Chips & Grains Features: Super Heavy ModelExtremely Tearing Resistant With Rigid PVC HelixSmooth Interior & ExteriorHigh Tensile StrengthGood Resistant To UV Working Temperature: -20°C To +70°C Material: Wall: Rigid PVCSpiral: Rigid PVC

• Small sizes: 20 mm to 110 mm

HDPE Pipes are extremely useful in Water Supply, Bore Well, Sprinkler, Lift Irrigation, Drip Irrigation, Pesticide Dispersal, Cable Ducting, SewerageDrainage, Natural & other gases etc, in urban and rural areas.They are also useful- for conveyance & flow applications in ChemicalProcessing Industries, Telecommunications, Vegetable Oils, Fruit Juices, Dairies and other liquids & semi-liquids including Acids, Alkalis & other corrosive chemicals. Our current range of HDPE pipes are available in sizes 20 to 630mm OD pressure rating from PN-2.5 to PN-16.5 conforming to IS 4984:1995 & IS 14333:1996 as per required application. We also supply the requisite HDPE fittings.

Used in a variety of industrial applications, our range of High Density Polyethylene (HDPE) Pipes is considered as the best option available in the market. Furthermore, our range is light in weight, which makes it easy to install & handle. Our pipes are durable, corrosion resistant and possess high impact strength due to the high grade raw material used to design these.

• Material: carbon fibre fabric, epoxy resin
• Color: black
• Usage/Application: Indstrial
• Density: 1.4
• Condition: new

One of india's largest and leading manufacturer of quality upvc pipes, swr pipes & fittings, hdpe pipes brings to you composite piping systems. Composite piping system is manufactured from high grade virgin polyethylene and aluminium. The polymer is effectively bonded in the inside and outside of the aluminium core by melt adhesive. This aluminium core is 100% leak proof for both liquids and gases making it an ideal pipe for transporting gases and liquids.

PTFE Lined dip tubes combine the strength and rigidity of steel with the Corrosion resistance of isostatically molded PTFE or Porous PTFE. This combination offers universal chemical resistance and can also add the ability to withstand the forces of agitation. Ideal for adding or withdrawing fluids in corrosive environments.

We offer a wide range of PTFE (Poly tetra fluoro ethylene)Coating on Flexible SS Below / Hose Pipes which are mainly used for pipe fittings. Our organization has gained vast expertise in offering a superior range of PTFE (Poly tetra fluoro ethylene) Coating on SS (Stainless Steel) Bellows that are manufactured with superior quality stainless steel materials that are procured from reputed vendors across the globe with zero defects. They are widely used in various industries like textile, pharmaceutical , Chemical , Offshore and agriculture. They are available in different sizes, lengths. They have excellent tolerance capacity and are highly durable.

Corrugated Standard is a more flexible form of HDPE conduit used to protect fiber cables in underground conduit systems. Corrugated Standard can be pulled into main conduit systems for short distances. Corrugated Standard is available in numerous colors and is available in reels or in coils. This product has a reduced bend radius when compared to Smoothwall HDPE. Bull-Line pull tape can be pre-installed in Corrugated Standard. This eliminates the need to install a measuring or pull tape after installation

• Feature: Multilayer Pipe - Tube clamps are specially designed for light duty / heavy duty & twin series only

Multilayer Pipe clamps - DIN 3015 Part 1, 2 and 3 - Tube clamps are used for securing a tool to a multi-piece panel assembly. They can clamp vertically in 2 layers 3 layers up to any numbers of layers but recommended up to 3 layers. Available in plastic aluminum bodies with steel or stainless steel plates and bolts.

colour:transparent with white spiral.temperature range: 10o c + 60o c, + 14 f + + 140 f.features :plasticised pvc hose with incorporated spiral reinforcement of anti-shock. rigid pvc. inside surface smooth, light corrugation outside. easy handling, light & flexible.resistant to crushing, abrasion, atmospherical agents and most chemicals. whether resistant.applications:suction and delivery of mineral waters, fruit juices, wines, liqueurs up to 25% alcohol contents, vinegar, alimentary liquids, milk, beverage, ice-cream, chocolates, pepremint, arreated drinks, powdered cereals. etc.approved for foodstuffs as d.m. 21.3.1973 and further changes.

We are sprawling over a large area with exceptional warehouse, which is well-equipped with cutting-edge technology and up-to-date management systems. With automated warehouse systems, we efficiently serve the bulk requirements. Keeping the quality standards high, we make certain that prior to production, the inputs (raw material) are examined by the professionals to make the final product free from defects.

Air piping is used to provide compressed air to the usage points. The compressed air requires to be delivered with appropriate quality, adequate volume, and pressure to accurately power the components that utilize the compressed air. Completely air tight and simple to mount, the range is ideal for installations requiring the highest quality air. These are energy efficient and do not require labor for installation. The range is best suited for compressor due to its nil leakage and nil corrosion features. Clients can avail this piping into various specifications to suit the industrial requirements. Our Compressed Air Piping Systems is specifically constructed for providing maximum efficiency. It has been extensively tested for safe operation in compressed air applications. We offer a safe, reliable system with the many advantages of thermoplastic construction. These include: Convenient light weight material Faster / lower installation cost More flexible installation Minimal system pressure drop Corrosion resistance

• Material: SS
• Type: Feed Pipe
• Country of Origin: Made in Indiaxx22222222232
• Size/ Diameter: 4 inch
• Length of Pipe: 3 m
• Usage/Application: For Centrifugal Machine
• Finishing: Polished
• Temperature: 180 Degree Celsius

• Feature: Optimum Quality
• Feature: Eco Friendly, Best Quality,Crack Proof

• Country of Origin: India
• Type: Ptfe Extruded Tube, MOLDED
• Material: PTFE, Virgin PTFE
• Shape: Rectangular, Round, Square

Outer Diameter : 12.5mm to 400mm (standard) Inner Diameter : 12mm or 90mm (standard) Length : 1000mm (standard) Made to Order : O.D. & I.D. available as per customer`s requirement. Material : Virgin PTFE Specification : ASTM D-3295

Product Range Dia 6mm – 1600 mmOutput : 40 Kgs/Hr.- 1500 Kgs/Hr. These production lines are developed by German Technology. It is applicable for high speed extrusion for various polyolefin materials e.g. PE,PP,PB,PERT,ABS etc.Diameters of screw ranges from 20mm to 200mm.  It is mainly applied in the extrusion of polyolefin plastics. Slotted feeder cylinder and novel screw design may remarkably enhance its plasticization.  It has advantages such as high extrusive volume, low melt temperature, wide applicable material range etc. High torque reducing speed installationHigh torque outputHigh hardness and fineness tooth flank gear structureLow noise box design  Oil pump cyclic lubricationOuter-connected cooler forced coolingSpecial feeder inlet designHas perfect water cooling deviceProfessional bushing with ladder grooveCharger with infeed device   Control systemFairly high precision temperature-control deviceSpeed regulative system with stable operationControl components with reliable performancePlasticization controllable which optimizes its plasticization performanceLow melt temperature makes the melt body even.Machine barrel and screw made with introduction of German technology Non-maintenance operation, super-quiet blower cooling cylinderResistance porcelain heater coil, Germany origin design for out lookingControl system is also available with  Microcomputer.

• Condition: Sterilized
• Material: Plastic
• Color: Grey
• Anticoagulant: EDTA
• Usability: Disposable
• Size: 13x75mm & 13x100mm sizes
• Minimum Order Quantity: 2000 Unit

Application   Transparent hose for a wide of applications like air, irrigation and general purpose.   Construction                        - Transparent plasticized PVC tube.                     - High tensile synthetic textile reinforcement.                     - Abrasion, ozone and weather resistant 

• Material: PVC/FRP Ducts
• Application: Industrial
• Brand Name: Plastic Fabricators
• Coating Thickness: 3mm and 5 mm
• Size: 200 mm Diameter to 2000mm Diameter

Our Polyurethane tubes are imported from Japan and Taiwan. Size from 4mm to 16mm is available with us in Blue, Black, Yellow and Green as standard. PU tubes with us are in straight and coiled form

• Application: Food Contact Components, Electrical Components, Mechanical Components requiring Close Tolerance, Pharmaceutical Machinery Components
• Density: 2.15 g/cm3
• Tensile strength: 22 MPa
• Service temperature: 260 degree C
• Absorption: Low Moisture

The Steel Industry and Chemical Processing Industry have been using fluoropolymer tubing products from materials like PTFE and hoses for many years for transferring highly caustic or corrosive chemicals. More and more, PTFE tubing is replacing carbon and other metal piping that deteriorates rapidly. Now and for the future, PTFE will continue to serve the industry in critical applications. SHORT LIST APPLICATIONS: Non-Shrink & Heat Shrink Tubing Heat Exchangers Coatings Carburetor Shafts Medical Catheter Guide Wires Mold Release Cryogenic Applications Automotive Brake Parts Jet Fuel Filters Bearing Pad

ms teflon lined pipe, borosilicate glass, Distillation Assemblies