Industrial Pump Dealers in Dadar East, Mumbai

The REFCO charge-oil pump eliminates the danger of drawing air and moisture into a refrigeration system when charging a compressor with oil.It charges without pumping the compressor down thus reducing charging time by over 70%.It pumps one quart in 20 full strokes of the piston.A high quality product from Refco, Switzerland.

Specifications Max Flow Rate586Lpm (155gpm)Port SizeInlet : 50.80mm (2" BSP)Discharge : 50.80mm (2" BSP)Air Inlet : 12.70mm (12" BSP)Air Exhaust : 19.05mm (34" BSP)Suction LiftDry : 4.57m (15')Wet : 7.62m (25')TeflonDry : 3.05m (10')Wet : 6.09m (20')Max Particle Size (Dia)6.35mm (0.250")

• Features: Only two rotating parts matting externally having principle of gear within gear. , Single gland construction reduces leakage to minimum. , Gears are well supported with the help of 4 bearings. and Self priming in nature.
• APPLICATIONS: Transfer of liquids ,, Booster application
• COST IMPLICATIONS: Power consumption is less than conventional pumps

External gear pump uses two identical gears rotating against each other -- one gear is driven by a motor and it in turn drives the other gear.  Each gear is supported by a shaft with bearings on both sides of the gear.  As the gears come out of mesh, they create expanding volume on the inlet side of the pump. Liquid flows into the cavity and is trapped by the gear teeth as they rotate.  Liquid travels around the interior of the casing in the pockets between the teeth and the casing -- it does not pass between the gears.  Finally, the meshing of the gears forces liquid through the outlet port under pressure.

The oil pump manufactured by us is widely demanded by the clients all over the world, owing to its quality performance and cost effectiveness. We are identified as a leading manufacturer, supplier, and exporter of oil pump in global arena. The oil pump offered by us is available in various shapes and sizes according to the requirements of the clients. Our oil is popular in the market for offering enhanced suction characteristics. why our oil pump? easy instballationlow maintenancereliable performanceendurable

Conforming to international quality management systems, our product range is of unparalleled value. Due to our streamlined packaging system, we are capable of meeting both standard and customized packing needs of the clients. Moreover, we make use of quality packaging material.

• Driven Type: Diesel
• Color: Grey, Silver
• Condition: New, Used
• Feature: Durable, Heavy Power
• Type: Diesel Injection Pump
• Weight: 100-300kg, 300-500kg
• Warranty: 3 MONTHS
• Country of Origin: India
• Sound: With Sound

your trusted autoparts service provider in Mumbai, MH. With years of experience in the industry, we are dedicated to delivering top-notch automotive solutions to meet your needs. Our team of skilled professionals is committed to providing exceptional service, ensuring your vehicle runs smoothly and efficiently. Whether you require repairs, maintenance, or high-quality autoparts, we have you covered. At Diesel Master, we prioritize customer satisfaction and strive to exceed your expectations. Trust us for reliable and affordable autoparts service that keeps you on the road with confidence.

motorized lubrication pumps, lubrication fittings, Lubricating Oil Pumps

with the assistance of an experienced team, we bring forth high quality medical vacuum pump. Today, we are well reckoned as one of the prominent medical vacuum pump suppliers based in india. Our vacuum (suction) supply system is available with tefc electric motor of siemens or crompton that assures long lasting performance. Air cooled vacuum pump system offered by us is available at very affordable prices within the stipulated timeframe characteristics air cooled type free air delivery to suction - 70 % of p.d. Approx. Max working pressure -29” of hg or 730 mm of hg. single stage three cylinder fitted with ms channel frame, complete with v-belt drive, belt guard etc. Along with the following-114” bsp stainless steel ball valve with ptfe seat with suitable brass adapters and non return valve silencer at discharge end projecting (open to atmosphere) outside the plant room copper pipe interconnection up to receiver mounted of required capacity demanded by hospitals hospital architects hospital construction companies hospital consultant companies nursing homes

• Brand Name: Unitech
• Rated Power: 230 Volts, 50 Hz
• Place Of Origin: Mumbai  
• Material: Stainless steel 304/316 Quality
• Usage: For high viscosity material link greases, adhesives etc.
• Features: Having digital, therefore quick change over for different volume, plc based filling system etc.

PLC BASED FILLING SYSTEM. HAVING DIGITAL. THEREFORE QUICK CHANGE OVER FOR DIFFERENT VOLUME. NO JAR NO FILL SYSTEM 2 TO 12 HEAD AVAILABLE. PNEUMATICALLY OPERATED. CONTACT PARTS IN STAINLESS STEEL 304/316 QUALITY. WITH S.S SLATE CONVEYOR. FLAME PROOF MODEL AVAILABLE. POWER 230 VOLTS, 50 Hz. USED FOR HIGH VISCOSITY MATERIAL LINK GREASES, ADHESIVE ETC. VACCUMETRIC FILLING ALSO AVAILABLE.

• Application: Cooler Use
• Driven Type: Electric
• Country of Origin: India
• Brand Name: E-Cool
• Cooler Type: Industrial Air Cooler
• Material: Plastic
• Power Consumption W: 20 watt

• Certification: CE Certified
• Condition: New
• Rated Voltage: 380V
• Rated Power: 1-5kw
• Automatic Grade: Automatic
• Driven Type: Diesel
• Feature: Durable, Heavy Power, Low Fuel Consumption
• Warranty: 1 Year

• Country of Origin: India
• Type: Rotary Gear Pump
• Certification: ISO 9001:2008
• Application: Gear System

The geometry of the two rotors partitions the volume between them into N different dynamically-changing volumes. During the assembly's rotation cycle, each of these volumes changes continuously, so any given volume first increases, and then decreases. An increase creates a vacuum. This vacuum creates suction, and hence, this part of the cycle is where the intake is located. As a volume decreases compression occurs. The Flow of liquid is axial through the elements.

• Power Range: V4: 0.37kW - 3.7 kW (0.5HP - 5HP)
• Speed: 2880 RPM

submersible pumps are vertical, multi stage, centrifugal pumps with motor at the bottom & pump at the top. The water enters at the bottom of the pump and flows upwards through many stages. The stainless steelbronze impellers rotate inside the diffusers with inherent guide vanes. The diffusers direct water leaving each impeller towards the suction opening of the next impeller. Such a flow through each stage of impeller and diffuser combination adds pressure at each stage and finally water under high pressure is discharged through outlet at the top.

• Temperature: up to 150°C
• Viscosity: up to 160.000 mPas

Rotary lobe pumps are designed to achieve maximum pump performance combined with minimal product damage. Specific attention is paid to the bearing construction and the rigidity of the shaft. The design is kept as compact as possible and the volume between the lobes is optimized.Capacity : 0,5 - 15 m3h, Pressure : up to 12 bar.

Solar submersible pumps is in great demanded by farmers or in remote areas where there is no power grid system. It is one of the sensible and effective uses of solar electric power. With our engineering expertise, REPL is ready to take on your water pumping needs with the use of green energy and affordable cost.

Our auto grease filling machine has tin lifting arrangement which is provided for efficient grease lifting purposes. This auto grease filling machine is electro pneumatically operated and made by using excellent grade stainless steel and mild steel. It is known for its low electricity consumption as it requires only 415 V of alternating current. Our auto grease filling machine is widely demanded in packaging lines of different industries for providing smooth packaging operation and high accuracy. Furthermore, it is also equipped with volumetric filler and transfer conveyor. Specifications Packing range: 200 gm to 5 Kg. Capacity 34-36 Cans / Min. for 200 gm 20-24 Cans / Min. for 1 Kg 12-14 Cans / Min. for 2 Kg 8-10 Cans / Min. for 3 Kg 4-6 Cans / Min. for 5 Kg Filling accuracy: ± 0.5% of HPS At S. O. P. and S. O. C. Operation: electro-pneumatic Electric supply: 415 V AC, 3 Phase Power consumption: 5.5 HP Approx Air supply: @ 6 kg/cm2 Air Consumption: 120 LPM Man Power reqd: 2 Nos Space requirement: 6.1 Mtr. x 1.5 Mtr. IN-Feed Conveyor: Construction: dodge type Track width: 250 mm Height: 800 mm Length: 1000 mm + 2100 mm (in-feed + filler Guide rails: Adjustable Drive: HP gear motor Operation: electrical, through V/F drive Volumetric Filler: Filler: augur type volumetric type timer base [as per attached specs.] Range: 500 gm to 5 Kg Can lift auto infeed: pneumatic for cavity killing System: using infeed valve actuator assy. (40 mm) photo sensor operated Transfer conveyor (for lid dispenser & presser): Construction: S.S. slat belt type Belt width: 190 mm Track width: 250 mm Height: 800 mm Length: 3000 mm Linear Speed: 14 mtrs per min Guide Rails: adjustable Drive: ½ HP gear motor Operation: electric Technical Specification (Filler Unit): Material: industrial grease - temperature: 70-80 degree centigrade Range: 0.5 to 5 kg., in tins / pails Hopper capacity: 35 Ltr. approx. made out of 16 swg., S.S. 304 sheet Product feed: automatic through actuated valve having auto level control Material flow: by rotating auger Flow control: digital programmable timer Fill setting: with key pad switches Fill accuracy: ± 0.5% of HPS at S.O.P. & S.O.C. Filling rate: 300 gms. / sec Augur control - by E / M clutch break unit Drive transfer: using ‘V’ belt Augur drive motor: 1 H.P., 3 phase, 415 V A.C. Mixer / wiper drive: using additional gear motor cap. 0.5 HP with suitable starter Power supply: 415 V A.C., 3 phase 4 wire 230 V A.C., 1 phase 3 wire Compress air supply: @ 6 kg / cm² Consumption: 40 LPM General construction: the machine fabricated out of M.S. angle, sheet etc, hopper and all other contact parts are made out of S.S. 304 and wiper strips of PTFE

Model electric pump Intex art. allows you to fully charge it from the wall outlet (220V). A model of the electric pump to inflate rubber boats, swimming pools, children's inflatable centers, inflatable furniture, without built-in inflatable systems. For ease of storage and transportation of the pump design provides a comfortable ergonomic handle.

• Type: Fogging Machines
• Weight: 100-500kg, 1000-1500kg, 1500-2000kg, 500-1000kg
• Color: Black, Brown, Grey, Light White
• Voltage: 110V, 220V, 230V, 380V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-5kw, 5-10kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Production Capacity: 1-50 Sets/day, 100-200 Sets/day, 50-100 Sets/day
• Warranty: 1year

PEW End Suction Pumps are non- self-priming single-stage, centrifugal volute pumps with axial suction port, centrally placed radial discharge port and horizontal shaft. Volute chamber and impellers are designed to give the best possible hydraulic efficiency and good suction lift characteristics. Most modern and highly sophisticated machinery and technology are engaged in manufacturing these pumpsets, using quality raw materials, dynamically balanced impellers and rotors to ensure long life.

• Type: Centrifugal Pumps
• Usage: Water
• Weight: 100-150kg, 200-250kg, 50-100kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Operating Type: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Warranty: 1year, 2years

High-Pressure pumps are used as the main feed pump to spray dryers which are equipped with one or two fluid nozzles. They are also employed as a feed pump for a growing market of reverse osmosis systems used in concentrating functional and sensitive products in the Dairy, Food, Pharmaceutical and Biotechnologies industries. Many brands are available, as an independent supplier we offer you the choice from varieties of the leading OEM’s.

• Country of Origin: Made in India
• Material: Plastic
• Usage/Application: Chemicals, Acids, Solvents, Lubricants
• Model Name/Number: Barrel Pumps
• Power Source: Manual

Rotary high vacuum pumps oil sealed, air cooled, v-belt driven and mounted on base plate with belt guard. Fitted with electric motor 220 volts a.c. single phase pump r.p.m. 500 displacement 50 ltrs / min   ACCESSORIES AT EXTRA COST• Non return valve - it is made of M.S. bar stock to prevent body leakages and is provided with a spring-tensioned rubber diaphragm. The diaphragm is pulled down due to suction of air when the pump starts and it blocks the port by spring tension and vacuum as soon as the pump and thereby prevents back flow of oil.• Vacuum gauge with regulator - gauge is of 2 inches(50 mm) diameter and graduated from 0 to 760 mm of mercury. The regulator is screw type which leaks atmospheric air into the pump and thereby maintains any desired vacuum in the system• Air filter• Moisture trap• Macleod gauge -very compact, range 10 mm to 0.01 mm hg. Pressure complete with mercury. range 10 mm to 0.01 mm hg.

• Rated Power: 415 Volts 3 phase 50 Hz
• Minimum Order Quantity: 1 Unit
• Filling Range: 100ml to 1000ml or 500ml to 5000ml
• Available from: 4 Head to 10 Head
• No Bottle: No Fill System
• Filling Accuracy: +/- 0.25%

Description / Specification of Automatic Servo Piston Filling Machine Drip free nozzles with filling range of 100ml to 1000ml, with drip tray for accidental drip. Mitsubishi make PLC system with 7" Touch Screen and VFD control for conveyor speed control. Contact parts in Stainless steel 304 quality. Body frame made up of M.S. with Powder coating or stainless steel. Capable of automatic intake of empty bottles / container on to the filling station and discharge after filling bottles with the help of stop and release lever pneumatically operated. Neck entry Nozzle system so that the nozzle enter inside the container before filling to avoid spillage. Enclosed body with transparent Acrylic doors in front and back. Pneumatically operated stopper Gates for bottle entry and exit. Having Tank of 200 Ltrs of Stainless steel with float valve for level controlling. In built memory to store 25 filling setting data. Setting of Volume by PLC

Universal multi-sport floor pump. Includes the following accessories: cone, needle for sports balls, bike adaptor. Use: All inflation types. Gauge: BarPSI. Barrel: Steel. Pedal: With soft rubber handle. Pressure: 7 bar 100 PSI. Hose length: 0.6 m.

BSA 1404HD: This is an upgraded version of Putzmeister's most popular stationary concrete pump model BSA1404D. This upgraded version BSA1404HD is a high pressure pump that caters to concrete pumping to 80-100 m building heights. This pump has smaller towing length for better maneuverability in narrow areas, thus most suitable for RMC pumping contractors and infrastructure companies. Apart from providing the benefit of better fuel economy, the pump is available in various drive options of engines as well as electric versions (BSA 1403HE). The newly introduced stationary pump further lowers the impact of concrete on its wear parts, thus giving 50-80 per cent more life. BSA 1404 HD pump is a special development for India and it has become a huge success among Indian customers since its launch in October 2009.BSA 702D: This stationary pump has been launched recently, especially for smaller projects. It can be used very conveniently with reversible drum mixers. It is an entry level machine for contractors and builders who are doing smaller projects.

• Motor Horsepower: 2.2 kW to 7.5 kW (3 hp to 10 hp)
• Motor Phase: Single Phase, Three Phase
• Brand: Kirloskar
• Discharge Range: Upto 38 Ips
• Voltage Range: 200 to 440 V
• Protection: IP 68
• Motor Body: Cast Iron
• Capacity: Up to 110 m3/hr
• Head Size: up to 64 m
• Usage/Application: Agriculture

We are offering chemical pump, based in mumbai. These chemical pumps are widely used in ceramics, chemical, cosmetics, detergent, distillery, dyestuff, effluent, etc. Our industrial chemical pumps conform to various industrial standards which ensure their high quality and durability. Further, we offer chemical pumps at market leading prices. salient features strong constructionquality-approveddurablelonger working life

Cease Fire XT are exporter, supplier and trader of broad catalog of Water Filters and Water Treatment Systems. Our offered products are acclaimed for robustness and high performance efficiency for longer life.