Industrial Pump Dealers in Fort, Mumbai

• Power Source: Electric
• Warranty: 1 Year
• Flow Rate: Upto 2000 LPM
• Motor Horsepower: Upto 7.5Hp
• Discharge Pressure: Upto 200 Meter
• Used: Used for dewatering / drainage of the sump or pit

• Features: GS approved,CE approved,UK standard plug

Centrifugal water and process application pumps meant for handling various liquids like water, corrosive chemicals, alkalis, fertilizers, dyes, pigments, effluents, pulp, slurries, etc.

• Pump Body: Aluminum, with threaded opening ISO 228/1
• Suction Grid: Stainless steel AlS1304.
• Impeller: Cast iron or nylon with technopolymer open type
• Motor Frame: Stainless steel AlSl304
• Motor Shaft: Ceramic and graphite
• Double Seal: mechanical seal ceramic-graphite or silicon-graphite, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
• Motor: Submersible asynchronous for continuous duty.
• SA: single-phase 220-240 V-50 Hz with thermal overload protector.
• Insulation: Class F
• Protection: IP 68
• Float Switch: with or without float switch, options on request. Type code "F" means pump equipped with float switch.

We are counted as one of the premium manufacturers and exporters of end pump laser machine, based in india. End pump laser machine is available in various specifications to meet different requirements of the clients. These machines serve wide application in electronic parts, plastic key-press, integrate circuit (ic), electrician machine and communication products. Advantages single phase with very low power consumptionworking hrs of diode 100,000 hrssmall in size, occupies very less areasharp beam qualityeasy and stable in operationair-cool machine available with 12 w out put suitable for imagephoto marking metals and plasticsmobile keypad and accessories markingelectronic parts

Uni Boost gear pump Model “UGNX/UGBX” which is heavy duty flange and foot mounting type positive displacement rotary gear pump. These pumps having doubled helical finished gears and hardened & ground shafts. Due to double helical gear it prevent axial load and side thrust which help to increase life and performance of pump. Model “UGBX” is a bush bearing type pump which can be used for viscous liquid having sufficient lubricating value for intermittent duty; however for continuous duty pump have needle roller bearing in Model “UGNX” and it will be selected for liquid having low viscosity, power lubricating values. Pump up to 2 1/2” size can be run at 1440 RPM & for higher the speed should be reduced to 960 RPM or Lower. In these pumps size 1/2" to 2 1/2" are provided with thread at end of suction & delivery and they are available with foot or flange mounting, But in size 3" to 6" are provided with flange at the end of suction & delivery and they are available with foot mounting only. These pumps can be operated up to pressure of 21 kg/cm² with 5.0 LPM to 2082 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200°c.   Features :   Internal Power losses: UniBoost Gear Pumps are of 2 types. The mechanical loss is the power required to overcome friction drag of all the moving part within the pump while viscous loss is power loss due to fluid viscous drag & shearing action of the fluid. Horse Power Calculation: The bhp required to drive a UniBoost pump is sum of theoretical HP & internal losses. The former is the actual work done in moving the fluid from inlet pressure condition to outlet pressure condition & is product of constant C=0.037, capacity in M3/hr. & pressure I Kg/cm2 or constant C=2.3, capacity in GPM & pressure in PSI.

• depth: 600 ft

Air Compressor Pumps are designed to draw water from borewells at any depth. * The compressed air will enter in the borewell through pipe line upto the bottom, where it is connected to a water pipe which pushes the water to the field, overhead tank or places where the water is required. * The water can be drawn at any depth, even at 600 ft. * The maintenance is very simple. * Compressors can be operated with motor or diesel engines. * No foot valve is required.

• Applications: High Rise Buildings, Commercial Complexes, Airports & Ports
• Flow Range: 700m³/ hr (3082 US gpm) or above
• Head: Up to 500 meters (1640 Ft)
• No. of Outlets: Up to 5 or more
• Type of Execution: Both Horizontal & Vertical

  UniBoost Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe  contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox. Rotary pumps can handle solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure, too, so output is constant and continuous. Rotary pumps also offer superior CIP/SIP performance. Once in line, they can be cleaned without being removed. Depending on the application, it is a good idea to check with the manufacturer to make sure if a particular lobe pump meets both 3-A requirements.

• Material: Mild Steel
• Country of Origin: Made in India
• Corrosion Resistance: Yes
• Model Name/Number: C7,C9,3126
• Usage/Application: For Caterpillar

• Type: Submersible Sewage Pump
• Application: Submersible
• Color: MUlticolor
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Diesel, Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warrenty: 1 Year, 2 Years

• Material: Stainless Steel
• Type: Foot Pump
• Power: Hydraulic
• Pressure: High Pressure
• Packaging Type: Box
• Working Pressure: 15-700Bar
• Weight: 7-8kg

• Features: Center Section, Electric Drive, Air Charge, Motor Options ( Available in AC or DC), Fluid Section, Seats, Balls, and Diaphragms
• Applications: Oil & gas, Mining, Water treatment, Paint circulation
• Power Source: Electric
• Phase: Single Phase
• Motor Horsepower: 2HP
• Discharge Pressure: 6 BAR
• Maximum Discharge Flow: 150 LPM

Hydraulic test pump designed for testing pressure cap. of different materials like drums, valves, boilers, barrels, tanks, for pressure vessels and cylinders complete with stand, pressure gauge, check valve and outlet valve with water tank having following specification.  

• Brand Name: Kilosker
• Material: Cast Iron
• Voltage: 220 V
• Usage/Application: Agriculture
• Frequency: 50 Hz
• Speed: 2880 Rpm
• Size: 32 x 50 mm
• Surface Treatment: Color Coating

• size: 150 mm
• Capacity: 470 m3 /hr

These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on. Water supply Air-conditioning Power plants Mine drainage Irrigation Fire fighting.

Motorised hydraulic pressure test pump compete with electric motor, piston pump, internal pipe line, pressure release and control valve, P.R.V. valve, pressure gauge, water filter, syphon, tank, outlet, base etc.

• Capacity: 10 m3 per hour to 5,000 m3 per hour.

We supply fire pumps for practically all duty points with or without the jockey pump, for industry, building, shipping, offshore services, emergency fire pumps, emergency fire pumps for ship, FI FI pumps Prime movers can be Diesel or Petrol Engine, Three phase or Single phase Electric Motor. Sets are available with 50 or 60 Hz. Available for a wide range of input voltages from 10220300400440500 Volts. Special Designs for Ship's fire pumps, Fifi 1, Fifi 2, Fifi 3, etc.

We are offering submersible pumps. Jain solar water pumping systems is a stand-alone system operating on power generated by solar photovoltaic panels.•village water supply • livestock watering • water supply to remote homes agriculture •micro-irrigation

SPECIFICATIONS Size : 50×50 (2″) Total head : 26m Max. capacity : 500LPM Engine type : 4 stroke, SV, Air cooled Fuel : PetrolKerosene Fuel tank capacity {L) : 0.43.9 Weight (approx) : 28kg