Industrial Pump Dealers in Mulund, Mumbai

We are a reputed manufacturer, exporter and supplier of cantilever sump pump. A cantilever shaft pump generally utilizes rolling element bearings to support an overhung shaft that extends downward into a sump or tank. The bearings are mounted above the maximum liquid level so that they are never exposed to the pumped fluid. Because there are no submerged bearings, the pump handles solids without the need for external flush, or any sealing devices, to keep the pumped fluid out of the support column. Cantilever pumps may also be operated dry, or with loss of prime, without damage. cantilever pumps require no seals or packing when used on open sumps. When applied to closed tanks with hazardous materials, the rolling element bearings limit shaft run-out so that mechanical seals may be applied reliably. with the exception of a few special cases, the shaft and bearing assembly of a cantilever pump is designed so as to operate below 1st lateral critical speed1. As the amount of shaft overhang increases, the shaft diameter is increased so as to provide sufficient stiffness to limit deflection and provide rotor stability. The design diameter of the shaft is a function of the length of the shaft overhang, the rotational speed, and the mass of the impeller. Typically, the practical maximum shaft diameter is about eight inches. Above this diameter, conflicts with bearing speed and load ratings start to occur. This diameter equates to a maximum overhung distance of somewhere between six and eight feet for most pumps. the lowest speed at which the natural frequency of the shaft is synchronized with the operating speed. Critical speed is characterized by very high vibration levels. Designing below 1st critical speed provides for smooth operations under all ‘good practice’ operational conditions. the maximum lift is very design and application dependent. On certain designs the maximum lift can be extended to about 20 feet. The trade-offs with increasing the maximum lift capability is with efficiency and axial thrust.

• Type: Magnetic Drive Pumps
• Certification: CE Certified, ISO 9001:2008
• Application: Liquid End Fluid
• Weight: 100-200kg, 300-400kg, 400-1200Kg
• Color: Blue, Grey
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw, 380V, 440V, 1-250 kw
• Driven Type: Electric
• Warranty: 1year, 2years
• RPM Power: 1400-2800/Hr
• Country of Origin: India
• Brand Name: Prehence, Kehuan, GemmeCotti, Huanyou
• Material: SS316 , alloy steel
• Pressure: 1-250 kg/ cm2

• Application: Chip Breaking , Gun Drilling, High Pressure Washing
• Power: Electric
• Type: Coolant Pump
• Country of Origin: Made in India
• Brand: Rajamane
• Usage/Application: Industrial
• Maximum Pressure: High Pressure Washing
•  :  

I Beam trolley for carrying heavy cables in industries like Foundry, Rolling Mills, Storage Containers, Steel Mills. All types of I Beam trolley ranging up to 200 mm flange width. Also designed for heavy cable carriers trolley are available. APPLICATIONS:LDO, FO, HFO, Molassses, Soap stock, Tar, Bitumen, Paint, varnish, Crude oil, Lube oil, Veg oil, Jelly, Resin, Black liquor, Printing ink, Gum, latex, Massecuite etc. FEATURES: :- »   Self- priming, high suction lift. »   Custom- made direction of rotation. »   Suction and delivery have BSP threaded connections.Flange connection can be given on request. »   High pressure/ High capacity /High temperature pumps can be manufactured as per the requirements. »   Pumps can be provided with motor, gear box, base plate coupling ,guard, flanges, etc as required. »   No leakage due to static ‘o’ Ring Sealing. »   Optional mechanical seal. »   Low cost in maintenance. »   Robust construction designed for long operational periods between routine maintenance. »   Interchangeability of spare parts makes maintenance economical.

We are noted Supplier of Deep Well Hand Pumps based in Maharashtra, India. In order to meet varied demands of the buyers, we make them available in different specifications. Further, we have adopted smart logistics network to entertain safe and swift deliveries. Buyers are free to place orders with us, we promise to deliver the same within a given time frame.   Technical Data : Cylinder diameter (mm) - 63.5 Maximum Stroke (mm) - 125 Approx. discharge at about 75 watt input m3/h: at 10 m head 1.8 at 15 m head 1.3 at 20 m head 1.0 at 25 m head 0.9 at 30 m head 0.8 Pumping lift (m) - 10 – 50 Population served (nos.) - 300 Households (nos.) - 30 Water consumption (lpcd) - 15 – 20 Type of well - Borehole Material : Pump head galvanised steel Handle galvanised steel Pump stand galvanised steel Pump rods galvanised steel Riser pipes galvanised GI pipe Pump cylinder cast iron / brass Plunger/footvalve brass Local manufacturing All “above ground components” have a potential for local manufacturing, the other parts need a high degree of quality control to ensure a reliable operation. The cost of the tooling requirement is substantial and therefore the number of manufacturer will be limited. Installation : The installation of the India Mark II Pump need well trained area mechanics or a mobile team with lifting tackle and comprehensive tool kit.Maintenance : This pump has limited “Community Management Potential”, but it is reliable and popular with the communities. To service the India Mark II Pump skills and tools are needed which exceeds the ability  of a village-level caretaker. However trained area mechanics can successfully maintain the pump.

We offer solar water pump. • dc solar pump upto 2 hp

HB pumps are meant for high mechanical efficiency, means less energy consumption,  lower cost, smaller motors, lower drive costs. Easy-Clean pump head which is ideal for in place cleaning, or can be rapidly stripped for manual cleaning, without disconnecting the pipe work. Positive, uninterrupted displacement by specially designed rotors creates a steady, gentle pumping action which dose not shear, agitate or aerate the product. Pumping chambers without pockets or crevices to harbour bacteria or contaminants. No contact between moving parts and no internal bearings in pump head. Rotor shafts sealed by hygienic mechanical seals or by packed glands selected for the duty conditions. Solid stainless, ASI 316 quality, pump head, rotors and shafts. Food quality rubber covered., and plastic rotors are also available. Robust, cast iron gear case enclosing oil lubricated rolling bearings are precision timing gears. Generous distance separating the pump head from the gear case. Ports threaded or flanged to suit customer’s requirements.

• Brand Name: Phoenix
• Material: Industrial Grease
• Filling Rate: 400 gms
• Range: 500 gm to 1kg.

The Roots type blower is a positive displacement lobe pump which operates by pumping, or moving, a fluid, usually air, but in some cases a process gas, using a pair of inter-meshing lobed rotors, which have a profile that looks not unlike the number 8. When operating, the fluid is trapped in the outer pockets surrounding the lobes and is carried, or progressed, from one side of the machine to the other. The lobe shaped rotors (usually two lobes, but it can be 3 or 4) work in tandem and move the fluid, usually air, from one side of the machine to the other. The lobes do not grab, or scoop the air out of the inlet pipe, but rather as they pass the inlet opening they cause a local low pressure area inside inlet port of the machine into which the fluid will then flow. As the rotors continue to turn the fluid that has entered the machine is trapped by the rotors and progressed from the inlet side to the outlet side. On reaching the outlet side the fluid has no choice but to be pushed out into the discharge pipe. Each time one of the rotor tips passes either the intake or exhaust port, the passing of that tip causes a pressure pulse to be generated. Therefore in the case of a blower with rotors that have 2 lobes there will be 4 pulses for each complete revolution of the pair of rotors (2 pulses from each rotor for each revolution). This allows for a relatively easy estimation of the principal frequency of pulsation that the machine will generate. Whilst the frequency of the noise from the passing of the rotor tips at the intake and exhaust ports is well understood, there is a second noise mechanism where the fluid tries to pass back through the machine from the high pressure side to the low pressure side by "slipping" around the rotors at their tips. This is an aerodynamic noise mechanism and is less easy to predict as the noise level changes with the speed of the blower and the gap between not only the rotors, but also between the gap between the rotors and the casing. The noise generated by these two mechanisms are quite different. The sound from the passing of the rotor past the open inlet port will have a certain frequency, or tone, which on large low speed machines can literally sound like a large helicopter, whilst on smaller machines which operate at higher speeds this tone may sound like a tuning fork. The aerodynamic sound from the slippage of the fluid back past the rotors is not usually obviously tonal in nature, but rather has a more broadband nature to it, not unlike a valve or pipe exhausting to atmosphere at high velocity.  

• Country of Origin: Made in India
• Usage/Application: Industrial
• Brand: LUBI
• Power Source: Electric
• Motor Horsepower: 2900 RPM
• Phase: Three Phase
• Frequency: 50 HZ

• Discharge pressure: 300 mtrs
• Temperature: 20 to 250 Deg C
• Capacity: 200 m3/hr
• Viscosity: Up to 20,000 Cst
• Outer Dia: NB 12.5 to 200 mm
• Surface Finishing: Color Coated
• Features: Exceptional performance, Rugged, Long lasting

• Usage/Application: Domestic, Agriculture, Sewage
• Power Source: Electric
• Material: SS
• Voltage (Volt): 110-260V
• Motor Horsepower: 1 - 3 HP
• Power Range: 1.1 to 37.0 kW

Dewatering Pumps are self priming, single stage, Centrifugal Pumps driven by A.C. squirrel cage induction motors in a fully submersible construction. They are easily transportable and have a wide variety of applications. These are powerful submersible contractor pumps designed for draining abrasive water from construction sites, mines, docks, flooded areas, etc. These easy-to-install pumps are often used in tunneling and mining where the reliability of the equipment is a crucial parameter. The pumps have an excellent performance capacity with high motor power combined with compact light weight design.

MILD STEEL / SS – 316 / SS 304 All wetted parts like pumping chamber, pump base, discharge tee, nozzle, wing nut, impeller are made of SS316 investment castings or polypropylene. The outer & inner pipes are seamless type made of SS-316. The shaft is made of SS-316 bright bar. The guide sleeve and lip seals are made of teflon. For almost all types of Solvents, Varnishes, Turpentine, Paints, Gasoline, HSD, Petroleum products, Chloroform, Drugs & pharmaceuticals, Degreasing agent, Phenol, IPA, LDO, Water treatment chemicals, Nitric acid, Phosphoric acid, Thermic fluid. POLYPROPYLENE Polypropylene with imported Hastalloy- B2/ C Shaft All wetted parts, outer & Inner pipes are made of Polypropylene.The shaft is made of imported Hastalloy-B-2. (Containing 29% Molybdenum). The impeller is made of ETFE (Moulding grade of Teflon Application : For highly corrosive liquids like conc., HCI, Dil H2SO4, HF, NaOH, formic acid, electroplating solution, photographic developers, salt solution, pesticides intermediates, toxic chemicals.

We are a leading manufacturer and supplier of Booster Pump in Mumbai

SCHWING portable concrete pumps are successfully deployed worldwide wherever vast quantities of concrete have to be pumped over exceptionally long horizontal and vertical distances. In building and civil engineering projects, they are fast, reliable and economically efficient in handling pumpable concretes under extreme conditions with regards to concrete designs, job sites and climate.

• Type: Automatic
• Certification: CE Certified
• Weight: 10-20kg
• Driven Type: Electric
• Pressure: 100-200bar
• Warranty: 1 Year

With an expansive range of available features (open loop pump and closed loop pump) and design options (axial piston pump gear pumps radial piston pumps electro hydraulic pumps), pumps provide both the performance and flexibility to meet the requirements of just about any application for industrial and mobile industries.