Industrial Pump Dealers in Saki Vihar, Mumbai

A Spray Nozzle is a device used for providing a controlled distribution of water in the cooling tower. Spray Nozzles that we offer are designed to deliver water in a spray pattern either by pressure or gravity flow. Full cone distribution pattern assures uniform water distribution for all film fills. Minimal spray overlap is required, providing uniform water distribution even near spray boundaries. These Spray Nozzles offer uniform water distribution over a wide range of operating water pressures.

We are a well known Supplier and Exporter of Plastic Spray Pumps. We source the Spray Pumps from known vendors in the market. Our Pumps are known for their leak proof design and long functional life. Stringent quality-test ensures that only defect-free Pumps reach the buyers. We hold the expertise of delivering bulk orders of the Pumps within the allocated time. One can obtain them at nominal rates from us.

Mercury pneumatic grease pumps are an efficient, low cost alternative to motorized grease pumps and hand operated pumps. They are used for dispensing preset quantity of grease into various machine components such as bearings, shaft assemblies, gear assemblies etc.

• Pump:: Reciprocating type
• Medium:: LOX, LN, LAR
• Flow (Nm3/hr.):: 350 (7.3 LPM)
• Suction Pressure (Max) (Bar):: 12
• Discharge Pressure (Bar):: 165
• Speed (RPM):: 265
• Absorbed Power (kW):: 4.7
• Bore (mm):: 36
• Stroke (mm):: 32
• NPSH (m):: 2.5
• Efficiency:: 85%

• Maximum Operating Pressure: 1000 psi

Grease injectors Longer lasting seal design for trouble-free performance Longer lasting seal design for trouble-free performance. Adjustable output volume from .001–.008 cubic inches (0.02–0.13 cm3) to custom fit the system to meet the needs of each lube point. Convenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properly. Operating pressures from 1200–3500 psi (83–241 bar) for optimal performance with up to NLGI #2 grease. Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications.

We export Oil Pumps for automotive and industrial engines using high grade raw material that ensures smooth running of the vehicle under high temperature. Our Oil Pumps are widely appreciated for their high reliability and are in much demand in the market. We are further capable of offering Oil Pumps in varied specifications to suit the requirement of varied engines. Product Range (Please contact us for complete range) We can develop engine Engine Oil Pumps as per customer samples and / or drawings. We have developed a large range of Engine Oil Pumps for agricultural, heavy duty, automotive, construction and other applications Click Here For Technical Specifications

• Material: Cast Iron
• Power: 1 HP
• Type: Vacuum Pump
• Country of Origin: India
• Number Of Stages: Single Stage
• Application: Laboratory
• Flow Rate: 20 m3

•  :  
• Weight (Kg): 10
• Air Consumption (m3/min): *
• Hose size (mm): 6
•  :  
• Fluid Inlet Hose Size: 1" NPT
• Fluid Outlet Hose Size: 1" NPT

• Number Of Stages: Single-stage Pump
• Motor Phase: Single Phase
• Frequency: 50 Hz
• Voltage: 380 V
• Power: 2.2 kW
• Motor Horsepower: 1 - 3 HP
• Usage/Application: Industrial

• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Material Grade: Cfm
• Driven Type: Electric
• Finishing: Pure copper
• Material: Copper
• Brand Name: Value
• Shape: Square
• Pressure: High Pressure
• Size: Depend on cfm

• Type: Pressure Booster Pumps
• Voltage: 220V
• Condition: New
• Driven Type: Electric
• Pressure: High Pressure
• Warranty: 1year
• Country of Origin: India

Intelligent pump control, it automatically adjusts operation to deliver the water pressure you desire. Permanent magnet Ie4 motor, high efficient, energy-saving 30-50%. Extreme silent, a sound level of only 50 dB(A) in typical use. Multiple protection: Overload protection, Dry run protection, Anti-freeze protection, Overheat protection. Super suction, can be up to 9m with 2mins. FEATURES Plastic pump body Plastic impeller Copper coil SS304 welded shaft

• Pressure: 2500 kg/cm2
• operate: upto 300 kg/cm2

The pressure required to dismount bearing assemblies generally is in the 200 to 500 kgcm2 range; and for torque-transmission joints is in the 800 to 1800 kgcm2 range. It is only in exceptional cases that a pressure of 2500 kgcm2 is required.

We are into marketing for one of the most genuine well renowned chemical slurry pumps & valve manufacturers which had been approved from llyods & irs & been regularly used by some very renowned companies specially government concers, following are some of the products which are specelized in. They have been regularly manufacturing materials like cd4mcu, ub 6, hv 9a, alloy 20, ca 6nm, cn 7m, din 4136, cf 3, cf 3m, cf 8, ca 15,din 1.4136, cf 8m, ni-resist, ni-hard, various grades of high alloy steels and any other special graded materials.facilities are available for ultrasonic and radiography tests

Pressure to 40bar (600psi) Vacuum to -950mbar Oversized check valve Contoured cushioned handles Protective caging for vent valve Hose, fittings, & carry case supplied Optional digital gauges

• Condition: New

• Features: Attractive patterns,Easy to place,Optimum quality

We are engaged in supplying high pressure knapsack power sprayer which is 2 stroke engine driven. Our knapsack power sprayer delivers high volume of liquid spray. The knapsack power sprayer, offered by us, has 25 liters capacity tank, which reaches a controlled operating pressure of up to 300-350 psi, enabling it to achieve fine spray mist applications, even at extreme heights. The heavy-duty engine of knapsack power sprayer delivers a satisfying performance with the help of a dual acting reciprocating pump. further, a practical drain connector underneath the chemical tank ensures complete draining of the pesticide.

Installation of air conditioning equipment is often awkward and sometimes it is difficult to find a route for the condensate water. So to make this task easier and avoid water leakage on your furniture, we introduce our range of condensate removal pumps. These pumps can also be used in the automotive and domestic appliances industry. Due to small size it’s easy to use in all air conditioners (ceiling, wall or floor Standing) of refrigeration capacity of 15 KW or less.

There are different types of vacuum pumps which have basically a common function and that is to remove air, gases and vapour from a confined space and creating a vacuum in that given space. Basically, there are three different types of vacuum pumps, 1. Positive Displacement Vacuum Pumps 2. Momentum Transfer Vacuum Pumps 3. Entrapment Pumps

• Type: Solar Water Pumps
• Product: Solar Pump
• Name: Solar Water Pumping

Solar pumping system 1. DC type system 2. AC type system All HP sizes available 3HP, 5HP, 7.5HP, 10HP, 20HP

• Type: Vacuum Pumps
• Application: Agrictulture, Automotive, Industrial, Marine, Power
• Overall Weight: 10-20kg, 20-300kg
• Is It Variable Speed: New
• Driven Type: Electric
• Power: 0-10 HP
• Voltage: 220 V, 320 V

We are the main supplier of this product.

• Country of Origin: India
• Type: Trimix Flooring Machine, Dewatering Pump
• Material: Medium Pressure
• Thickness: 0-5mm
• Certification: Dewatering Pump
• Weight: 250kgs
• Color: Medium Pressure
• Application: Industrial
• Fuel: Electric
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic

• Fuel: Petrol

Crish metal Works has also supplied fabricated sheet metal components to Petrol pump companies in the past. These components are mainly used in fuel dispensers.

Used for low flow and high head duty Pulsation Free Head upto 10m3/h Head uptp 1000m Pressure from Vaccum upto 1500bar Temperature resistance from -150ºC upto 450ºC No heat exchanger required upto +350ºC