Industrial Pump Dealers in Subhash Nagar, Mumbai

• Application: Machine Tool, Plastics, Construction
• Operating Pressures: up to 250 bar (3625 psi)

The dry screw pump design is based on the operating principle of screw but with twin screws to achieve the required compression. Two single-piece, parallel, twin screws contained in a pump body, compresses & transfers the gas by rotating twin screws. The pump body is cooled by water circulating through a jacket, cooling the compressed gas to discharge at low temperature. The temperature of the pump can be adjusted for process requirements by controlling the water flow rate and temperature. This will raise or lower the overall operating temperature of the gases being pumped. The compression ratio of the pump varies little over the operating pressure range, giving constant absorbed power. This enables the condition of the pump to be diagnosed by monitoring motor current.

• Type: Self Priming Pumps
• Weight: 10-20kg, 20-300kg, 30-40kg, 40-50kg
• Color: Brown, Grey, Light White, White
• Condition: New, Used
• Automatic Grade: Manual
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Driven Type: Electric
• Warranty: 1year, 2years

A very critical component, it must be checked for smooth operation of fan, shafts, pulleys and belts. Appropriate material will ensure smooth running under high temperature caused by centrifugal forces. Avoid tap on the shaft as it may result in damage to the ball. The fan should seat squarely with the Pump Shaft. Improper fan and pulley cause damage. The fan belt tension must be appropriate. They are pinion and pulley types, works in parallel with engines.It should have free movement / smooth operation of fan, shafts, pulleys and belts.

• Color: Customized
• Brand Name: Modern General Sales
• Head: 4 M to 20 M
• Pump Type: Centrifugal Pump
• Power Source: Electric
• M.o.c: SS 316 / Polypropylene
• Size: 19 mm to 65 mm
• Cap: 3 m3 / Hr to 67 m3/ Hr

• Rated Power: Electric
• Country of Origin: Made in India
• Brand: Anivarya
• Usage/Application: Industrial
• I Deal In: New Only
• Reversible: Yes
•  :  

LD Series Pumps and Packages  Air Operated Piston PumpDiscover the Value of Graco LD Series Pumps  Stay ahead of the competition with LD Series Pumps. These affordable and full featured pumps are designed for lower volume applications and are available in 3:1 and 5:1 for oil and 50:1 for grease. These pumps are fine-tuned for a compact, flexible and still incredibly durable solution.LD Series Oil PumpYou work hard to provide good service and that’s exactly what we had in mind when we engineered the LD Series Packages. Whether your delivery is in your backyard or 50 miles away, LD Packages reliably do the job. You can count on Graco equipment to reduce repair hours so you can concentrate on deliveries and bring more to your bottom line. All LD package  meters come standard  with trigger guard, hose boot and automatic nozzel.Features:Three Inch Air Motor – Provides more power to create better flow.NXT Air Valve – Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.Modular Air Valve – Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.Built-In Thermal Relief and Inlet Strainer – Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.Material:Motor OilGear OilHydraulic FluidAutomatic Transmission FluidOilGreaseApplications:LubricationOil TransferGrease TransferPumpingFluid TransferIndustries:Agriculture Equipment - MaintenanceDealerships and Quick Lubes - Pumps

Technical Details Mounting Panel installation Connections 1/4” BSP suction port and 1/8” BSP delivery port Weight 1.5 kgs Mounting Position Horizontal or Vertical Operating Fluid Mineral Oils Hydraulic Data Operating Pressure 1500 psi (max) Delivery volume of oil output cc.

Enerpac high pressure, hydraulic lightweight hand pumps feature a compact design and are available in single and two speed pump types Durable glass-filled nylon reservoir and nylon encapsulated aluminium pump base for maximum corrosion resistance Two-speed operation reduces handle strokes by as much as 78% over single speed pumps Lower handle effort to minimize operator fatigue Integral 4-way valve on P-842 for operation of double-acting cylinders Handle lock and lightweight construction for easy carrying Large oil capacities to power a wide range of cylinders or tools Non-conductive fiberglass handle for operator safety Internal pressure relief valve for overload protection.

Equipments like storage tank, liquid pump, vaporiser, filling stations etc for compressing various cryogenic liquid products can be provided as per the requirement of the client.

I Beam trolley for carrying heavy cables in industries like Foundry, Rolling Mills, Storage Containers, Steel Mills. All types of I Beam trolley ranging up to 200 mm flange width. Also designed for heavy cable carriers trolley are available. APPLICATIONS:LDO, FO, HFO, Molassses, Soap stock, Tar, Bitumen, Paint, varnish, Crude oil, Lube oil, Veg oil, Jelly, Resin, Black liquor, Printing ink, Gum, latex, Massecuite etc. FEATURES: :- »   Self- priming, high suction lift. »   Custom- made direction of rotation. »   Suction and delivery have BSP threaded connections.Flange connection can be given on request. »   High pressure/ High capacity /High temperature pumps can be manufactured as per the requirements. »   Pumps can be provided with motor, gear box, base plate coupling ,guard, flanges, etc as required. »   No leakage due to static ‘o’ Ring Sealing. »   Optional mechanical seal. »   Low cost in maintenance. »   Robust construction designed for long operational periods between routine maintenance. »   Interchangeability of spare parts makes maintenance economical.

We are offering Hydraulic Pumps

HB pumps are meant for high mechanical efficiency, means less energy consumption,  lower cost, smaller motors, lower drive costs. Easy-Clean pump head which is ideal for in place cleaning, or can be rapidly stripped for manual cleaning, without disconnecting the pipe work. Positive, uninterrupted displacement by specially designed rotors creates a steady, gentle pumping action which dose not shear, agitate or aerate the product. Pumping chambers without pockets or crevices to harbour bacteria or contaminants. No contact between moving parts and no internal bearings in pump head. Rotor shafts sealed by hygienic mechanical seals or by packed glands selected for the duty conditions. Solid stainless, ASI 316 quality, pump head, rotors and shafts. Food quality rubber covered., and plastic rotors are also available. Robust, cast iron gear case enclosing oil lubricated rolling bearings are precision timing gears. Generous distance separating the pump head from the gear case. Ports threaded or flanged to suit customer’s requirements.

• Brand Name: UEW
• Pressure: 130-150 bar
• Warranty: 6 Months
• Power Source: Electric
• Max Flow Rate: 1500-2000 Psi
• Material: MS
• Model: X-SERIES
• Motor Horsepower: 20
• Phase: 3 Phase
• Automation Grade: Automatic
• Maximum Discharge Flow: 150 bar
• Portable: Yes
• Motor: 5 - 20 HP
• Speed: 1450 RPM
• Discharge Flow: 10-40 LPM Max

We are noted Supplier of Deep Well Hand Pumps based in Maharashtra, India. In order to meet varied demands of the buyers, we make them available in different specifications. Further, we have adopted smart logistics network to entertain safe and swift deliveries. Buyers are free to place orders with us, we promise to deliver the same within a given time frame.   Technical Data : Cylinder diameter (mm) - 63.5 Maximum Stroke (mm) - 125 Approx. discharge at about 75 watt input m3/h: at 10 m head 1.8 at 15 m head 1.3 at 20 m head 1.0 at 25 m head 0.9 at 30 m head 0.8 Pumping lift (m) - 10 – 50 Population served (nos.) - 300 Households (nos.) - 30 Water consumption (lpcd) - 15 – 20 Type of well - Borehole Material : Pump head galvanised steel Handle galvanised steel Pump stand galvanised steel Pump rods galvanised steel Riser pipes galvanised GI pipe Pump cylinder cast iron / brass Plunger/footvalve brass Local manufacturing All “above ground components” have a potential for local manufacturing, the other parts need a high degree of quality control to ensure a reliable operation. The cost of the tooling requirement is substantial and therefore the number of manufacturer will be limited. Installation : The installation of the India Mark II Pump need well trained area mechanics or a mobile team with lifting tackle and comprehensive tool kit.Maintenance : This pump has limited “Community Management Potential”, but it is reliable and popular with the communities. To service the India Mark II Pump skills and tools are needed which exceeds the ability  of a village-level caretaker. However trained area mechanics can successfully maintain the pump.

We bring forth impeccable Oil Free Vacuum Pump for industrial usage. Precisely engineered using high grade components, our Oil Free Vacuum Pump is a piston powered and oil free pump. The Oil Free Vacuum Pump features human design concept with with an innovative electronic, mechanical technology. Further, it produces low vibration and is compact and light in weight.

• Type: Magnetic Drive Pumps
• Certification: CE Certified, ISO 9001:2008
• Application: Liquid End Fluid
• Weight: 100-200kg, 300-400kg, 400-1200Kg
• Color: Blue, Grey
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw, 380V, 440V, 1-250 kw
• Driven Type: Electric
• Warranty: 1year, 2years
• RPM Power: 1400-2800/Hr
• Country of Origin: India
• Brand Name: Prehence, Kehuan, GemmeCotti, Huanyou
• Material: SS316 , alloy steel
• Pressure: 1-250 kg/ cm2

Features Built in Watson-Marlow™ peristaltic pump Schlick 970, anti-beard spray nozzle with auto-needle 4″ diameter slip exhaust connection Siemens colour touch screen & PLC control Integrated high efficiency exhaust filter Emergency stop Compact benchtop design Benefits Compact and self-contained for flexibility and mobility Automatic supply and exhaust blowers with built in high efficiency exhaust filtration Designed to handle the smallest R&D batches, 100g-600g capacity

• Usage: For Cutting

• Material: PVC,SS
• Brand Name: Systematrix Engineering Services
• Head: PVC
• Discharge Pressure: 15 kg/cm2

We offer solar water pump. • dc solar pump upto 2 hp

• Temperature: 200 Degree Centigrade
• Brand: LUBI
• Motor Phase: Three Phase
• Material: SS
• Max Flow Rate: 5 LPM to 500 LPM
• Weight (Kilogram): 50- 100 Kg
• Benefits: Compact design Easy and simple installation User –Friendly Operation. Low noise level. Reliable and robust construction Reliable water supply Built-in motor protection, dry running protection. Back pull out design which simplifies inspection & maintenan

• Country of Origin: Made in India
• Motor Horsepower: 1 HP
• Stages: Single Stage
• Motor Phase: Three Phase
• Material: Cast Iron
• Type Of End Use: Industrial

We at Melkev can provide you with a perfect solution for all your water Chemical pumping or transfer needs

Centrifugal Process pump   Monoblock / Monoset Pumps    Centrifugal Multi Stage (Horizontal / Vertical)   Centrifugal Non Metallic (PP/PVDF Pump) Self Priming Centrifugal (Non-clog type)

Rotary vane pumps are used whenever it is necessary to have a process vacuum of up to 10-3 mbar. VACUUBRAND rotary vane pumps are high-performance, yet compact, and can be equipped with an extensive line of VACUUBRAND accessories. They have an innovative lubrication system with a built-in oil pump and have a large oil volume. This extends oil change and service intervals and protects the pump at start-up. The effective gas ballast feature, with its high-flow gas ballast, provides high vapor pumping capability for water and solvents. VACUUBRAND rotary vane pumps´ volume flow rate is specified at atmospheric pressure, as is customary with PNEUROP®. For process effiency, however, the high volume flow rate of VACUUBRAND pumps under process conditions, as well as a consistently high volume flow rate over a wide pressure range, is the key to your satisfaction in real-world application. After switch-off the aggregate is vacuum-sealed to protect your application from undesired venting and oil back flow. constriction-free vapor pathway allows high volume flow rates, even when close to the ultimate vacuum high tolerance for water and solvent vapors, because of the high-volume gas ballast quiet running and excellent ultimate vacuum, even with gas ballast active corrosion protection: Oil cycle closes vacuum-tight against the intake of corrosive gases and oil impurities into the reservoir when shut down new design lubrication circuit, and large usable oil volume provides extended oil change and service intervals compact design, low weight and easy service with telescopic design