Industrial Pump Dealers in Worli, Mumbai

Application: Chilled Water Circulator is ideal for chilling & condensing operations in Rotary Vacuum Evaporation. Advantages: Sturdy fabrication with SS top & SS angle structure.Panels in oven baked epoxy coated mild steel. Four sturdy castors for easy manouverability Hermetically sealed environment friendly CFC free compressor. Built in coolant reservoir of approx 4 litres. Built in pump with capacity of 15 lit/min – at zero head for water Temperature range upto 0°C. Built in digital temperature controller – 1°C resolution. Supllied with two insulated silicon hose(1 met each) for external circulation. Gross dimensions: 56 x 41 x 65 cm.

The Liquid Oxygen Pump is a single acting piston pump. It is used for filling Oxygen into Cylinders upto a pressure of 165 kgs./cm2. SANGHI - ORG Liquid Oxygen Pump The pump is designed for assembly in air separation unit that works by pumping liquid Oxygen and gasifying the same in Heat Exchangers for final filling as gas in Cylinders. Control of liquid feed is not necessary, because the pump is designed in accordance with the plant size and the liquid produced is constantly pumped off. The drive unit is similar to any reciprocating machine with the Crank Shaft, Flywheel, Connecting Rod, Cross Head, etc. The Liquid Oxygen Pump consists of a stainless steel inside liner with liquid inlet and evaporated gas outlet ports. There are no valves on these ports, which are closed by the piston itself on the pressure stroke. The third outlet is the main discharge outlet with the two non-return ball valves. The two ball valves remain firmly closed during suction stroke, due to high pressure in partly filled cylinders. To ensure that these valves are fully closed, a positive pressure of about 60 kgs/cms2 must be maintained on it. When a fresh batch of cylinders is taken for filling, open the manifold valve slowly or use a spare batch of cylinders to ensure positive pressure on these valves.  

The Gas-Tester II H Pump is set for action by compressing the bellows. A pump stroke is started by pressing the release button. When the sample (100ml) is drawn through the tube, the end-of-stroke indicator changes color. An accurate measurement is obtained because the sample draw procedure itself is controlled only by the specifications of the pump and the flow resistance of the detector tube.

We source robust hand powered pumps that ensure clean and safe access to water for people in economically backward regions of the world.

The Liquid Oxygen Pump is a single acting piston pump. It is used for filling Oxygen into Cylinders upto a pressure of 165 kgs./cm2. The drive unit is similar to any reciprocating machine with the Crank Shaft, Flywheel, Connecting Rod, Cross Head, etc.The pump is designed for assembly in air separation unit that works by pumping liquid Oxygen and gasifying the same in Heat Exchangers for final filling as gas in Cylinders. Control of liquid feed is not necessary, because the pump is designed in accordance with the plant size and the liquid produced is constantly pumped off. The Liquid Oxygen Pump consists of a stainless steel inside liner with liquid inlet and evaporated gas outlet ports. There are no valves on these ports, which are closed by the piston itself on the pressure stroke. The third outlet is the main discharge outlet with the two non-return ball valves. The two ball valves remain firmly closed during suction stroke, due to high pressure in partly filled cylinders. To ensure that these valves are fully closed, a positive pressure of about 60 kgs/cms2 must be maintained on it. When a fresh batch of cylinders is taken for filling, open the manifold valve slowly or use a spare batch of cylinders to ensure positive pressure on these valves.

• Brand Name: Jonhson
• Fuel Tank Capacity: 350 m3/h
• Max Flow Rate: 3600 rpm 

Application: Chilled Water Circulator is ideal for chilling & condensing operations in Rotary Vacuum Evaporation. Advantages: Sturdy fabrication with SS top & SS angle structure.Panels in oven baked epoxy coated mild steel. Four sturdy castors for easy manouverability Hermetically sealed environment friendly CFC free compressor. Built in coolant reservoir of approx 4 litres. Built in pump with capacity of 15 lit/min – at zero head for water Temperature range upto 0°C. Built in digital temperature controller – 1°C resolution. Supllied with two insulated silicon hose(1 met each) for external circulation. Gross dimensions: 56 x 41 x 65 cm.

• Weight: 2000 grams
• Power Source: 14.8 V / 4 AH Li-Ion rechargeable battery pack
• Operating Temperature Range: 0 to +40 deg C
• Operating Pressure: Ambient +/- 10%
• Enclosure: MS / Aluminum composite
• Dimensions (H x W x D): 230x210x1150 mm
• Standard Accessories: Sampling Hose, Filters, Data logging Cable, Carrying Case.
• Range: 0-200 g/m3
• Resolution: 1 g/m3

The Methyl Bromide Fumigation System is used for monitoring any of the MBr concentration within a fumigated chamber at a fumigation concentration level (20 to 70 g/m3). Used for fumigation process, the Methyl Bromide Fumigation System is manufactured in confirmation to the set industrial standards. We have become a reliable Manufacturer, Supplier and Exporter of Methyl Bromide Fumigation System based in Mumbai.   Features Inbuilt sample draw pump Data logging capability with date / time / gas concentration Logged data can be downloaded to a computer using our FumiSoft dat-downloading and analysis software Portable printer option for on-the-spot report printing   Gas Related Specifications Gas Detected : Methyl Bromide Concentration Range : 0-200 gm/m3 (0-5% v/v) Resolution : 1 mg /lit (0.01%) Detection Principle : Thermal Conductivity Detector (TCD) Accuracy : Inherently +/- 2% (but also depends on the accuracy of the calibration gas & method) Sampling : Internal Sample Draw Pump with adjustable flow meter   Display & Indicator Specifications Display : Backlit 16x2 Alphanumeric LCD Display LEDs indicate status of Power Function Keys : For Increment, Decrement, Setting Flow Control & Zero Adjustment Knob Flow meter indicates air suction level Electronic Alarm : 85 db Audio Alarm, Visual LEDs   Electronics & Electrical Specifications Electronics : Microprocessor based instrument Connectivity : RS-232 for PC & Printer connectivity Data Logging : Data logging facility for up to 500 samples Data logging with user settable features Records gas readings along with time / date

Application: Chilled Water Circulator is ideal for chilling & condensing operations in Rotary Vacuum Evaporation. Advantages: Sturdy fabrication with SS top & SS angle structure.Panels in oven baked epoxy coated mild steel. Four sturdy castors for easy manouverability Hermetically sealed environment friendly CFC free compressor. Built in coolant reservoir of approx 4 litres. Built in pump with capacity of 15 lit/min – at zero head for water Temperature range upto 0°C. Built in digital temperature controller – 1°C resolution. Supllied with two insulated silicon hose(1 met each) for external circulation. Gross dimensions: 56 x 41 x 65 cm.

Water for hydrant system is supplied by diesel engine driven pump  One no., water storage tanks of total capacity 100 cu.m. is provided.  Pumps work under positive suction head. The outdoor piping for the system in general is laid under ground. Pumps shall only be stopped manually.  Manual start/stop provision is provided in local control panel.

• Type: Impellers
• Material: Brass, Copper, Metal, Plastic, Stainless Steel
• Shape: Round
• Weight: 250gm, 500gm
• Color: Golden, Grey, Light Brown, Silver
• Usage: Industrial Use
• Finishing: Non Polished, Polished
• Specialities: Anti Corrosive, Fine Finishing, Immaculate Finish, Strong Strength

• Power Range: V4: 0.37kW - 3.7 kW (0.5HP - 5HP)
• Speed: 2880 RPM

submersible pumps are vertical, multi stage, centrifugal pumps with motor at the bottom & pump at the top. The water enters at the bottom of the pump and flows upwards through many stages. The stainless steelbronze impellers rotate inside the diffusers with inherent guide vanes. The diffusers direct water leaving each impeller towards the suction opening of the next impeller. Such a flow through each stage of impeller and diffuser combination adds pressure at each stage and finally water under high pressure is discharged through outlet at the top.

• Pressure: 0. 7 kg/cm2
• Capacity: 75 To 1000 L.P.M.
• Ult. Vacuum: 21" Hg. To 28" Hg

Our clients can also avail a wide range of vacuum/pressure pumps for printing machines. These pumps are specially designed for the purpose of manufacturing compact, elegant and low noise pumps. Our product range comes with durable finish standards, high in performance, requires low maintenance and works on low power consumption.

• Material: ALUMINIUM
• Color: ORANGE
• Brand Name: Wilden
• Power Source: AIR
• Model: T8
• Pump Weight: 33.1 kg (72.0 lbs)
• FLOW RATE: TO 590.5 LPM (156 GPM)
• MAX PRESSURE:  8.6 BAR (125 PSI)

Multi-Purpose Air Foot Pump - FOTPUP       Mini Foot Pump For Bikes, Toys, Cycles etc.   Versatile Compact Design And Rugged Construction   Non Slip Foot Pedal   Make Pumping Air Easy And Comfortable   Can Be Used To Fill Air In Footballs, Cycles, Bikes etc.   Portable Size But Powerful Air Supply   Meter To Read The Air Pressure   High Pressure Foot Operated Air Pump   Inflats Up To 100 Lbs Per Square Inch Pressure   Compact Heavy Duty Design   Unique Adapter Fits All, Domestic And Imported Valves

fuel injections pumps, Diesel Oil, diesel vehicle parts, Garden Tools

• Material: Stainless Steel
• Features: Easy to operate, Less power consumption
• Impellers Type: Single-Suction
• Closing Type: Semiclosed
• Usage/Application: Industrial

• Material: Mild Steel
• Application: Construction
• Power Source: Diesel
• Surface Finish: Polished

• Model: GHS 350 VSD
• Nominal displacement: 240-1070 cfm
• Ultimate pressure: 0.35 m bar
• Oil quantity: 16-40 ltr
• Noise level range: 51-65 dB(A)
• Shaft power: 5.5 kW

reciprocating pumps, beverages pump, Vane Pumps, Sliding Vane Pump

• Overall Weight: 400 x 300 x 350 mm / 14 kg

Rotary high vacuum pumps oil sealed, air cooled, v-belt driven and mounted on base plate with belt guard. Fitted with electric motor 220 volts a.c. single phase pump r.p.m. 500 displacement 50 ltrs / min   ACCESSORIES AT EXTRA COST• Non return valve - it is made of M.S. bar stock to prevent body leakages and is provided with a spring-tensioned rubber diaphragm. The diaphragm is pulled down due to suction of air when the pump starts and it blocks the port by spring tension and vacuum as soon as the pump and thereby prevents back flow of oil.• Vacuum gauge with regulator - gauge is of 2 inches(50 mm) diameter and graduated from 0 to 760 mm of mercury. The regulator is screw type which leaks atmospheric air into the pump and thereby maintains any desired vacuum in the system• Air filter• Moisture trap• Macleod gauge -very compact, range 10 mm to 0.01 mm hg. Pressure complete with mercury. range 10 mm to 0.01 mm hg.

PEW Submersible Borewell pump suitable for 3", 4', 6", 8" and 10" borewell are made with superior quality raw materials and unique design to ensure best in-class performance with lowest operating cost and zero maintenance for years. Matchless and unique hydraulic design of bowl, impeller and diffuser is put together to construct a most energy efficient pump. Highly sophisticated engineering and State of the art manufacturing process results in world class quality and consistency. Compact and high efficient design saves electricity by 20% to 40% as compared to old conventional designed pumps.

• Material: Carbon Steel, Mild Steel
• Voltage: 110 V, 220 V , 380 V, 440 V
• Power: 1-3 Kw , 3-5 Kw, 5-7 Kw
• Power Source: Electric
• Warrenty: 1 Year ,2 Years
• Pressure: High Pressure, Low Pressure, Medium Pressure ,Other
• Capacity: 100-200 L/Min , 200 - 400 L/Min

• Brand Name: VINAYAK TRADING
• Car Model: Toyota 2TR
• Supply Ability: 500 Piece/Pieces per Month
• Engine Code: 4JA1
• OE NO.: OEM
• Place of Origin: Maharashtra, India

• Type: Spray Pumps
• Material: HDPE, PE, Plastic, PP, PVC
• Weight: 2-4kg, 4-6kg, 6-8kg
• Color: Black, Creamy, Green, Grey, Red, White, Yellow
• Condition: New, Used
• Application: Agricultural Use
• Handle Material: Aluminium, Metal, Steel
• Feature: Best Quality, Durable, Highly Efficient, Light Weight
• Storage Capacity: 10ltr, 20ltr, 30ltr, 40ltr
• Drum Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm

• Material: Plastic
• Brand Name: GABY INSTRUMRENTS
• Application: Industrial
• Resolution: 0.1 RPM
• Model Name/Number: GI1900
• Type Of Tachometer: Non Contact Tachometer

• Motor Horsepower: 0.5 hp
• Flow Rate: 120 LPM
• Minimum Order Quantity: 1 Piece

• Brand Name: various
• Packaging Details: as required by buyer
• Place of Origin: Maharashtra, India
• Port: mumbai