Industrial Storage Rack Dealers in Goregaon, Mumbai

We are offering racks. Maximum length: 1 meter module: upto 8

Compactors are used for keeping files including Flat files, Box files. Arch. Lever files, Books, Stationary documents within available space. It consists of following storage units.Single faced Static / fixed UnitSingle faced Movable unitDouble faced Movable unitDETAIL DIMENSIONS & SIZES OF DIFFERENT UNITS:Mechanical Drive Type One Bay Deep:Single faced static unit - 1980H X 915W X 457D (mm.)Single faced movable unit - 1980H X 915W X 457D (mm.)Double faced movable unit - 1980H X 915W X 914D (mm.)Overall height of compactor from ground level to compactor top panel = 2080mm.1980mm. Body + 65mm. Base frame + 35mm. Track & moving clearance.Load bearing capacity per shelf- minimum 70Kgs.Mechanical Drive Type Two Bay Deep:Single faced static unit - 1980H X 1830W X 457D (mm.)Single faced movable unit - 1980H X 1830W X 457D (mm.)Double faced movable unit - 1980HX 1830W X 914D (mm.)Overall height of compactor from ground level to compactor top panel = 2080mm.1980mm. Body + 65mm. Base frame + 35mm. Track & moving clearance.Load bearing capacity per shelf - minimum 70Kgs. Mechanical Drive Type Three Bay Deep:Single faced static unit - 1980H X 2745W X 457D (mm.)Single faced movable unit - 1980H X 2745 W X 457D (mm.)Double faced movable unit - 1980H X 2745 W X 914D (mm.)Overall height of compactor from ground level to compactor top panel = 2080mm.1980mm. Body + 65mm. Base frame + 35mm. Track & moving clearance.Load bearing capacity per shelf - minimum 70Kgs.Body With Fine Finish: Body to be made of prime quality Pre-coated sheet of minimum 1mm thick with protective film, material conformed to IS 14246 & Dry Film Thickness (DFT) of pre-coating to be minimum 40-45 microns. The body should be multi-bended & weld less.Shelf With 10 -Folds: Shelf with 10 folds for better strength & better load bearing capacity shall be provided. It should be made of prime quality Pre-coated sheet of minimum 1mm thick conformed to IS 14246 with protective film. All the shelves to be adjustable at 25mm pitch. Each body to have 5 compartments with 4 adjustable shelves.Adjustable Shelve Brackets: Adjustable Shelf brackets of HR-14G (material is confirmed to IS 2062/ IS 1079) to be provided at all 4-comers of the shelf. Rubber/PVC Stud: Protective rubber/PVC stud to be provided in between bodies to avoid any chance of damages and minimize noise emission and prevent scratches during movement of respective bays. Rigid Base Frames: Rigid frame to be of welded construction, heavy duty made of hot rolled sheet (H.R. Sheet) Conformed to IS 2062/ IS 1079 with 3.15mm thickness and capable of taking specified load and capable of being drive without getting distorted. A pair of M.S. wheels & a pair of anti frictional ball bearing should be fitted in every base frame for smooth & easy drive. Each Base frame /Trolley to have required nos. of Plummer block bearing. All bearing to be of self aligned, maintenance free, self lubricating type and sealed for life.Guide Rail: The guide rail to be made of 25mm high quality bright square bar housed in a C channel made of 2mm thick HR sheet (conforming to IS 2062/IS1079). It should have flanges on either side with ball bearing for free movement of compactor bodies. Guide rail should be provided with stopper to stop derailment of unit & it should be fitted in ground by grouting bolt.   Smooth & Simple Drive Mechanism: The drive mechanism to be working on chain & sprocket system and special grade antifriction bearing to have smooth and effortless movement.Each mobile unit to have 2nos./3 nos. of Mild steel wheels & 2nos./3nos self-aligned ball bearings.The drive mechanism should comprise of sprocket chain type arrangement.The chain used to be of high quality material.The drive mechanism to be provided on the external front side of the compactor system.The drive mechanism to be concealed from all sides.ROUND COMFORTABLE PU-HANDLE WITH THREE ARMS & HOLDING BAR FOR EASY DRIVING AND SAFETY LOCKING (DRIVING WHEEL AND SAFETY LOCK)High qualities Polyurethane (PU) handle of diameter 320mm to be provided with three attractive arms & holding bar for easy drive. The Safety lock to be aluminium casted spring loaded knob type which is situated under the handle for easy locking at any position of unit. Drive cover to be made of 1mm thick pre-coated or Close Rolled Close Annealed (CRCA) (conforming to IS 513) prime quality steel and of box type to cover the entire drive mechanism completely.Main Locking: - The system to be provided with locking on the last unit by locking stiffener in such a way as to ensure that when all the units are brought together and the lock is operated; it does not allow access to the units.Aisle Space: Aisle Space inside of units to be approx. around 760mm or as per drawing.Indexing Arrangement: Sheet Metal/Acrylic indexes to be provided on each front panel of the Compactor units for easy identification and retrieval.Fastener: Galvanized / Zn Plated fasteners (nuts & bolts) to be used.Anti Rust Treatment: All the components of mobile units to be pre-treated of anti-corrosion treatment.Colour: any    

• Brand Name: HP
• Form Factor: 1U Form Factor
• Processor: Intel Xeon E5-2620 V3 Processor
• Memory: 16 GB DDR4
• Storage Hard Disk Drive: (2) x 300GB SAS, 10K RPM
• Power Supply: Dual Power Supply
• Raid Controller: HP Smart Array H240 Raid Controller

• Type: Mobile Racks
• Material: Brass, Iron, Metal
• Shape: Rectangular, Square
• Color: Black, Grey, Silver
• Condition: New, Used
• Finishing: Non Polished, Polished
• Feature: Anti Corrosive, Durable, Eco-Friendly, High Quality, Shiny Look

We are the main supplier of this product.

Armus Technologies has carved a niche in the market for supplying Networking Server Racks. The Networking Server Racks ensure reliable operation of the rack mount IT equipment in unique environments. Wall mount Networking Server Racks are designed for small hub and LAN applications in wiring closets and server rooms with floor space constraints. Also, our Networking Server Racks are heavy duty enclosures that can be deployed in Zone 4 regions that require the safety and ruggedness of NEBS rated enclosure.

• Color: Black, Blue, White
• Material: SS316, SS304
• Storage Capacity: 500L, 750L, 1000L
• Confition: New

• Material :: Polypropylene

This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths. Easy to load, these are essential in microbiology & immunology labs. The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting.

• Type: Slotted Angle Racks
• Material: Aluminium, Iron, Metal, Steel
• Shape: Rectangular, Square
• Application: Construction, Industrial Use, Making Rack
• Style: Antique, Modern
• Thickness: 0-10mm, 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Color: Black, Grey, Silver
• Condition: New, Used
• Finishing: Non Polished, Polished
• Feature: Anti Corrosive, Durable, Eco-Friendly, High Quality, Shiny Look, Good Quality
• Number of Rack: 1, 2, 3, 4

Retail Displays offered come in bright and attractive designed finish and can be made available by us in different designs so as to match up with the specific demands of the customers.

• Net Weight: 125Kg

The Smart Rack Model of APW President is an Innovative enclosure design to serve the IT Infrastructure needs of a wide spectrum of business enterprises and medium size users. It combines elegant aesthetics with practical functionality. The zero ‘U’ PDU mounting features allows unobstructed access to the rear panels of rack mounted equipment – while also improving airflow towards the perforated rear door. Easy and Rapid assembly at site from flat packed CKD kits is another feature and mounting of all internal accessories is Tool-Less.

We are offering shelving systems.

Base of each drawer is perforated making it deal for industrial use Load capacity of each drawer is 70kg unified load distribution (UDL) Efficient drawer division greatly improves the space utilization offered by these tool cabinets Each drawer has 2 steel partitions and 5 steel dividers Each drawer has full width handles with integral label holders Floor fixing holes are pre-drilled Push-button high quality central locking Powder coated

• Material: Stainless steel 316L
• Features: Leak proof reservoirs, Can withstand high pressure
• Surface Finish:: Up to 600 grit
• Pressure range:: : 0.5MPa to 10MPa

We are one of the leading manufacturers of optimum quality storage tank. This tank is widely used as a reservoir for water, chemicals, and milk. This product is designed to withstand high pressure and extreme temperatures. This product offers optimum resistance to heat and corrosion. This product is known for its dimensional accuracy, resistance to leakage, and compact design. This product is made available at standards market prices.

• Material: Stainless Steel
• Storage Capacity: 6 Bottle
• Usage/Application: Bar
• Surface Finished: Color Coated

We are the exporter and supplier of this products.

Gear cutting of up to 3000 mm lengths in one set-up. We produce mill racks on a CNC milling machine. The maximum length we can cut in one clamping is 1000 mm. We produce straight teeth or helical teeth with an angle up to 45 degrees to the left or right. The largest tooth width is 240 mm. The module span is from 10 Module. We also produce racks with irregular divisions

Industrial carousels is a proven product and one of the best. The smooth movement of the rail guides gives better print quality.

• Country of Origin: India
• Type: Two Tier Racking System
• Weight: 100-1000kg
• Color: Yellow & Red
• Warranty: 1year
• Height: 6-10 Feet

II tier Racking system is a raised storage area, or tiered storage structure as it is most commonly known, is a raised platform rack or shelf mounted structure independent of the host building structure. It is supported by either pallet racking or shelving to eliminate the need for a structural floor. It increases floor space and optimises storage capacity by using the height of the building. 

Designed to hold the weight of fruits and vegetable along with being appealing in appearance, our Super Market Racks are highly durable. These racks offer single sided shelves which make it compact and strong. Thus, all our Super Market Racks consume less space, can be easily moved and are absolutely low on maintenance.

• Size: Multisizes
• Type: Industrial, Storage Racks
• Material: Iron, Metal
• Color: Blue, Grey, Orange, White
• Feature: Corrosion Resistant, Fine Finish, Heavy Duty, High Quality, Long Strength
• Finish: Polished
• Country of Origin: India
• Application: Warehousing storage backend
• Capacity: 50-200 kgs

The roll forming technology enabled various profiles enabling us in offering any length and height as in ambica’s heavy duty palletized racking systems and a cost effective solution.all our products are available in powder coated finish which is oven baked after seven tank phosphating pretreatment process ensuring lasting surface. Our system has been found useful in almost all kind of industries, like pharmaceutical, chemical, engineering, textile,food processing and electronic in their ancillary departments like raw material, finished goods, packing material, engineering store etc

We are offering industrial water storage tanks, storage tank, water tank. we are engaged in manufacturing various storage tanks of ss-316l, esp. For pharma industries. These are carefully designed & mfg. With special welding technology. Options of 'plain' tanks & 'jacketed' with insulation & 'cladding'.

• Size: Select from Standard Size Mentioned in Description
• Type: Drawer Type
• Brand Name: TRIVETA
• Material: Sheet Metal
• Appearance: Actual
• Specific Use: Systematic Storage of Shoes
• Application: Systematic Storage of Shoes
• Folded: No

Metal Shoe Rack. Deep 5.5 inches, Wide 20 Inches & Height from 28 - 67 inches. 2, 3, 4, 5, 6 Compartment Options. Powder Coated or Enamel Paint. 1 Year Warranty. Central Locking System.

• Size: Customize
• Type: Mobile Compactors Storage System
• Material: C.R.C.A
• Color: Brown, Grey
• Variety: Cabinet
• Specific Use: Storage Area Enhancement
• Brand Name: SPACE PLANNERS

With our vast experience, we have emerged as one of the renowned manufacturers, suppliers, and dealers of Mobile Compactor Storage Systems. They have been successful in maximizing the existing working space of all type of businesses. Mobile Storage Systems offers the Security of stored material and proves to be very cost-effective. Features of Mobile Compactor Storage System: Smooth Polished and Constructed Finish Available. Quality Finish Provides Lasting Service Usage. Available in Different Shape, Metal Sheet Thickness as well as widths options.

Rack, Wood Floor Decking, Wooden Mirror Frames, Oak Engineered Floor

• Type: Laboratory Furniture
• General Use: Commercial Furniture
• Lead Time: 25 Days for Container order
• Model Number: HDR-3
• Place of Origin: China (Mainland)
• Packaging Details: Good Quality Export Packing
• Port: SHANGHAI

We are main supplier of this product.

We deals in supplying of wide range of Heavy Duty Storage Rack.

Slotted Angle Racks are ideally known as the most economical storage system. They are totally dismountable and can be modified or expanded height and lengthwise. We offer slotted angles in 40mm, 60mm and 80mm with thickness ranging from 2.0 mm to 2.5 mm depending upon load bearing capacities.

• Height: 5-10 Feet
• Material: Mild Steel
• Thickness: 0.8-1.2mm
• General Use: Storage
• Surface Treatment: Powder Coated
• Locking Type: Manual locking

We offer maxima space power heavy duty rack. The roll forming technology enabled various profile help us to offer any length and height as well cost effective solutions. All our products are available in powder coated finish which is baked by superb pretreatment process to ensure the long lasting surface. Our system have been found useful to almost any kind of industries, to name a few sectors such as pharmaceuticals, chemicals, engineering, textile, food processing, and electronic industries. In all departments such as raw material store, finished goods store, packing material store, engineering store. Apart from all above, maximaa space power has created space for record management. Service industry as well for retail chain companies for their backend warehouses.

• size: 48”(W) x 24”(D) x 60”(H)

Both Sided Garment Hanging Stand Both sided garment Hanging Stand is made from 1“x 1“ stainless steel square tube. Overall size of stand is 48”(W) x 24”(D) x 60”(H). Both sided garment Hanging Stand is easy to dismantle and widely use in middle floor space. Merchandising made easy with at every 2" interval (1" slot on 2" on centre) Both sided garment Hanging Stand comes with heavy duty casters at base for easily movement. Since both sided garment Hanging Stand having slots on both sided, you can adjust the height of hanging level individually from both the sides.

Five Door Wall Mounted Metal Shoe Racks